Used Granulators & Pelletizers in Illinois, USA

CUMBERLAND 1456i GRANULATOR W/FEED ROLLS 18718

• Manufacturer: Cumberland

One (1) used Cumberland model 1456i granulator. S/N 8400-81004. 14″ x 56″ feed throat. Three (3) knife twin shear rotor with two (2) bed knifes. Rotor is belt driven by a 75 HP motor. 68″ wide in feed pull rolls ...

CONAIR CG1424 (RAPID R24) GRANULATOR 12486

• Manufacturer: Conair

Conair model CG1424 granulator (Rapid R24), S/N 410.105. 14″ x 24″ feed throat, 3 knife open rotor, 2 bed knife, tangential cutting chamber. 25HP 230/460V motor. Dual fly-wheel insulated tray feed hopper with 17″...

NELMOR G1012LS LOW SPEED GRANULATOR 16141

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 9206-31452. 10″ x 12″ feed throat, 5 knife solid rotor, 2 bed knife. 5HP 230/460V motor through a gearbox. Chain and sprocket driven rotor. Double wall top robot / h...

NELMOR G1012LS LOW SPEED GRANULATOR 16580

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 8710-26404. 10″ x 12″ feed throat. 5 knife solid rotor, 2 bed knife. 3HP 230/460V. SEW-Eurodrive motor and gearbox. Chain and sprocket driven rotor. Insulated top ro...

PALLMAN 4-7.5 RUBBER GRANULATOR 18882

• Manufacturer: Pallmann

Pallman “Ultra-Granulator” type PS, series C knife mill. Model 4-7.5. 20″ x 29.5″ feed throat entrance (510 mm x 750 mm). 400 mm diameter guillotine style rotor with three (3) rotating knives and two (2) fixed be...

NELMOR G1436MB SHEET FEED GRANULATOR 16953

• Manufacturer: Nelmor

Nelmor model G1436MB granulator. S/N 9604-37866. 14″ x 36″ feed throat, 3 knife solid rotor, 2 bed knife, 100HP 230/460V 1,770 RPM motor, wire for 460V. MB series heavy duty out-board bearing design. 8″ OD right ...

NELMOR G1820M1 GRANULATOR 18469

• Manufacturer: Nelmor

Nelmor model G1820M1. No S/N. 18″ x 20″ feed throat. 3 knife open rotor, 2 bed knives. Tangential cutting chamber. 30 HP 230/460-volt motor. Insulated conveyor feed hopper and body panels. 6″ OD right hand airvey...

REBUILT NELMOR G3030HD GRANULATOR 18484

• Manufacturer: Nelmor

Nelmor model G3030HD granulator. S/N 9606-37721. 30″ x 30″ feed throat. 5 knife rotor with knife carriers, 2 bed knife. Dual Fly-wheels. Tangential cutting chamber. 100 HP 230/460-volt 1181 RPM motor. Insulated l...

NELMOR G1220M1 GRANULATOR WITH SIDE 16617

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 7612-10077. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife. 20HP 230/460V motor. Single wall tray feed hopper evacuated by a side mounted Nelmor model F410 1HP blower...

NELMOR G1220M1 GRANULATOR WITH PIPE 16678

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 8010-15995. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife, 25HP 230/460V motor. Left hand 10″ x 5.75″ side profile chute, in-feed only. Side mounted 5003FD 3HP blowe...

REBUILT CUMBERLAND 584 GRANULATOR W/SIDE 17980

• Manufacturer: Cumberland

Cumberland model 584 granulator. S/N 335000-93010. 14″ x 20″ feed throat. 3 knife open rotor, 2 bed knife. 20 HP 230/460-volt motor. Left hand insulated side feed hopper at a 48″ in-feed height. Insulated body pa...

GRANUTEC TFG810-10 FEED ROLL GRANULATOR 17391

Granutec model TFG810-10 granulator, S/N 0109.4765, 8″ x 10″ feed throat, 3 knife rotor, 2 bed knife, 10 HP 460-volt motor, rear 10″ wide smooth steel feed roll in-feed powered by a 1/2 HP 90-volt D/C motor and v...

ACCRAPAK SYSTEMS LAB PELLETIZER 18126

One (1) used Accrapak Systems model 750/1B laboratory strand pelletizer. 1″ entrance. 24 knife solid helical rotor. 1 HP drive motor. Includes 4″ air knife. S/N 5288-9-95

NELMOR G810LS LOW SPEED GRANULATOR 16117

• Manufacturer: Nelmor

Nelmor model G810LS, low speed granulator, S/N 8904-28845. 8″ x 10″ feed throat, chain and sprocket driven 3 knife solid rotor, hard faced cutting chamber, 1HP 230/460V motor with a gearbox. Insulated top robot/h...

NELMOR G810M1 GRANULATOR WITH PROFILE 16628

• Manufacturer: Nelmor

Nelmor model G810M1 granulator, S/N 7205-4995. 8″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 5HP 230/460V motor. Double wall tray feed hopper, with right hand 3.5″ x 3.5″ profile chute b...