Used Granulators & Pelletizers in Illinois, USA

CUMBERLAND 14″ PELLETIZER ROTOR 12 8427

• Manufacturer: Cumberland

Cumberland 14″ pelletizer rotor. 12-knife bolt-on. CECO part no. 54063.

CONAIR CL1018 GRANULATOR 17381

• Manufacturer: Conair

Conair model CL1018 granulator, S/N 300.1556, 10″ x 18″ feed throat, 3 knife open rotor, 2 bed knife, 7.5 HP 230/460V 870 RPM (slow speed) motor. Can be changed out to a normal rate of 1,800 RPM. Tray feed hopper...

FOREMOST S45 GRANULATOR 2545

Foremost model S45 granulator, S/N 24461. 16″ x 45″ feed throat, 3 fly knife, solid rotor, 2 bed knife cutting chamber. Twin 30HP motors, airveyor discharge.

CUMBERLAND 2050B GRANULATOR 17689

• Manufacturer: Cumberland

Cumberland model 2050B granulator, S/N 651420-88001, 20″ x 50″ feed throat, new 5 knife 160mm high shear rotor, 2 bed knives (1 raised & 1 standard on upstroke), 200 HP 460-volt motor, solid chamber with swing ou...

IMS GAU-46 AUGER GRANULATOR 8712

IMS model GAU-46 auger granulator, S/N AL-620860199 10″ x 10″ cutting chamber, 7.5HP motor. 10″ x 42″ auger area 1.5HP auger motor.

Conair Pelletizer, Model 304.

• Manufacturer: Conair
• Model: 304

53713026 Used Conair Pelletizer, Model 304.

Conair Pelletizer, Model 304.

• Manufacturer: Conair
• Model: 304

53713025 Used Conair Pelletizer, Model 304.

NELMOR GA1010M4 7320

• Manufacturer: Nelmor

Nelmor model GA101M4 auger granulator, S/N 77910477. 9″ x 50″ auger 3 knife fly rotor, 2 bed knife cutting chamber, 5HP motor.

GLOUCESTER 1225 GRANUALATOR 3383

Gloucester model 1225 granulator. S/N none. 12″ x 25″ feed throat, 5 knife open rotor, 2 bed knife cutting chamber. 40HP motor.

NELMOR AN88MS 6051

• Manufacturer: Nelmor

Nelmor AN88MS auger granulator, S/N 8307-16549

POLYMER 912 7253

Polymer 912 auger granulator, 9 x 12 cutting chamber, 12 x 42 auger with blower discharge 5HP motor.

GRANUTEC 66MM2.5 3634

Granutech 6″ x 6″ auger granulator model 66MM2.5, S/N 485403. 6″ x 6″ feed throat, 3 knife open rotor, 2 bed knife cutting chamber. 6″ x 20″ auger area, 3HP motor, mounted on a caster base with start/stop push bu...

NELMOR GA1010M2 5168

• Manufacturer: Nelmor

Nelmor auger feeder grinder model GA101M2, S/N 74087650. 10″ x 10″ feed throat.

UN CUMBERLAND 68 ROBOT FEED 4531

• Manufacturer: Cumberland

New Cumberland 6 x 8 robot feed hopper granulator, S/N 42600-98005. 16 segment knife rotor, 2 bed knives, 1/4″ hole screen, 1.5HP 480V motor. Bin discharge, mounted on casters, complete with starter and controls.

REBUILT AEC WG1256 PADDLE FEED 18497

• Manufacturer: AEC

Rebult AEC model WG1256 thermoforming granulator. S/N 509000-10002. 12″ x 56″ feed throat, 5 knife twin shear rotor, 2 bed knife. 30 HP 460V motor. Pneumatic assisted cutting chamber opener. 8″ right hand airveyo...