Used Granulators & Pelletizers in Illinois, USA

CUMBERLAND 1420 GRANULATOR 16023

• Manufacturer: Cumberland

Cumberland model 1420 granulator. S/N none. 14″ x 20″ feed throat, 3 knife rotor, 2 bed knife. Approximately 20HP motor. No in-feed hopper barrel base discharge with 3/8″ clearance and 26.75″ wide x 24″ deep barr...

CUMBERLAND 1220 GRANULATOR 17979

• Manufacturer: Cumberland

Cumberland model 1220 granulator. S/N 293400-00503. 12″ x 20″ feed throat. 3 knife open rotor, 2 bed knife. 15 HP 230/460-volt motor. Insulated tray feed hopper and body panels. 4″ OD left hand airveyor discharge...

CUMBERLAND 1842i GRANULATOR 16016

• Manufacturer: Cumberland

Used Cumberland model 1842i granulator, S/N CG0170-99504, 18″ x 42″ feed throat, new 3 knife twin shear/high shear open rotor, 2 bed bed knife, 75HP 460V motor, insulated tray feed hopper and body panels, 8″ left...

CUMBERLAND 584 GRANULATOR 16508

• Manufacturer: Cumberland

Cumberland model 584 granulator. S/N 335000-90001. 14″ x 20″ feed throat, 3 knife slant cut open rotor, 2 bed knife, 30HP 230/460V motor. Insulated tray feed hopper with 8″ ID left hand pipe chute gravity dischar...

GLAVES GCD-75C 24 KNIFE PELLETIZER 19029

Used Glaves model GCD-75C pelletizer. Dual drive machine, one for the cutter head and one for the top pull roll. 75mm entrance. 24 knife helical cutter head. Mounted on casters.

RAPID 2442RS HOG GRANULATOR 18808

Used Rapid model 2442RS hog granulator. S/N 85.859, 24″ x 42″ feed throat. 20 knife hog rotor. 3 bed knives. Dual flywheels. Conveyor in-feed hopper with pneumatic tilt back assist. Hopper conveyor in-feed is clo...

SEM 23 GRANULATOR 18754

SEM model 23 (Nelmor G1224M1) granulator. S/N 04C05784. 12″ x 24″ feed throat. 5 knife solid rotor with 2 bed knives. 40 HP 460-volt motor. Double wall insulated tray feed hopper with manual jack back assist. 5″ ...

POLYMER 1010AE AUGER GRANULATOR 16721

Polymer model 1010AE auger granulator, S/N 1010AE443796. 10″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 10HP 460V motor. 8″ OD auger with a 12″ x 47″ long auger area and a 30″ in-feed he...

CUMBERLAND S-200 SCREENLESS GRANULATOR 17800

• Manufacturer: Cumberland

Cumberland model S-200 screen less granulator, S/N 00862, 11″ x 11″ cutting chamber, two “S” cutters, 2 HP 230-volt 1740 RPM motor – wired 240-volts, robot / top hand feed hopper, gravity discharge, on casters, c...

CUMBERLAND 2050H HOG GRANULATOR 18724

• Manufacturer: Cumberland

Cumberland model 2050H granulator. S/N 551000-86001. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. No in-feed hopper. 160mm rotor bearings with air purge. Belt d...

NELMOR LPG1012LS GRANULATOR 14506

• Manufacturer: Nelmor

Nelmor model LPG810LS granulator, S/N 9405-34565. Low speed, 8″ x 12″ feed throat, 3 knife solid rotor, 2 bed knife, 3HP 230/460V motor through gearbox drive double wall tray feed hopper, bin discharge, mounted o...

SCHEER BAY SGS-50E PELLETIZER 18133

• Manufacturer: Scheer

One (1) used Scheer Model SGS-50-E strand pelletizer. S/N SE5-0707. Nominal 2″ wide entrance. Has 20 knife carbide inlay helical style rotor driven by an A/C motor with Reliance variable speed controller. Mounted...

GALA 5MUP UNDERWATER PELLETIZING SYSTEM 17908

One (1) used Gala model 5MUP underwater pelletizing system. Includes 2 HP cutter with four (4) blade hub, three (3) spare dies, 40 GPM TWS-40 water system with heater, pump, heater exchanger, 5 HP model 8.2 BF dr...

MAAG 60E 30 KNIFE PELLETIZER 18631

• Manufacturer: Maag

One (1) used Maag “Primo” model 60E strand pelletizer having a 2.36″ (60 mm) entrance. Thirty knife helical rotor. 2.2 KW (3 HP) drive. 480/3/60. Poly top roll and steel bottom roll. Includes starter and touch sc...

GALA MUP7 UNDERWATER PELLETIZING SYSTEM 18847

Used Gala MUP 7 underwater pelletizing system (2010). Serial number 10300372.Package consists of the following: A) 6″ hydraulic slide plate screen changer with stand and 3 HP power pack B) 15 KW Cutter with stand...