- Trusted Seller
24” x 92” Lansing G-24 Hollow Spindle Lathe
- Manufacturer: Lansing
- Spindle bore: 165.1 mm
24” x 92” Lansing G-24 Hollow Spindle Lathe View fullsize Features (2) 17" 3-jaw chucks with 6" hole 4-way toolpost 6-position turret style carriage stop Work light Specifications Diameter of bore through spindle...
- Trusted Seller
1995 ROMI EZ-PATH LATHE #84190
- Manufacturer: Romi
- Model: EZ-PATH
SPECIFICATIONS: SPINDLE NOSE ----------------------------- A2----- 5 EQUIPPED WITH: DX 32 CONTROL COOLANT SYSTEM SPINDLE NOSE 2 in NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRI...
Ames, IA - Trusted Seller
Nardini 1440 Toolroom Lathe Mascote MS1440
- Manufacturer: Nardini
Equipped with: Acu-Rite 2 axis DRO Follow rest 8” 3 jaw chuck w/reversable top jaws Thread dial Taper attachment Chuck guard 10” 4 jaw chuck Coolant Steady rest Manuals
- Trusted Seller
Monarch 20" x 96" Toolroom Lathe Series 60
- Manufacturer: Monarch
- Model: SERIES 60
Equipped with: 3 jaw chuck w/reversible jaws 4 way tool post Large capacity roller type steady rest Newall 2 axis DRO *Feeds are in millimeters* **Machine is USA built but shipped to Germany**
- Trusted Seller
Jet 14" x 40" Toolroom Lathe GH14402X
- Manufacturer: JET
Equipped with: 10” 3 jaw chuck, 12” 4 jaw chuck 4 way tool post 12” face plate Steady rest, Follow rest * Machine is in like new condition. Acu-Rite 2 axis DRO Foot brake Back splash
- Trusted Seller
Clausing 15" x 50" Toolroom Lathe C1550J
- Manufacturer: Clausing/Colchester
- Model: C1550J
- Spindle bore: 53.97 mm
Equipped with: 10” 3 jaw chuck Steady rest Micrometer bed stop 4 way tool post Work light Removable chip try
- Trusted Seller
Clausing Metosa 13" x 30" Toolroom Lathe Metosa C1330S
- Manufacturer: Clausing/Colchester
- Model: C1330S
Equipped with: 4” steady rest Quick change tool post & 3 holders 8” 3 jaw chuck 8” 4 jaw chuck Taper attachment (needs shaft and rear block) Chuck guard
- Trusted Seller
1993 Andrychow 17/25" x 80" Toolroom Lathe TUG-40
- Manufacturer: Andrychow 17/25" x 80" Toolroom Lathe
- Spindle bore: 52.07 mm
Equipped with: 10” 3 jaw chuck w/removable jaws Live center Taper attachment Tool post w/9 holders Steady rest Chip pan Back splash
- Trusted Seller
1995 Clausing Colchester 21/32" x 84" Toolroom Lathe Mastiff VS
- Manufacturer: Clausing/Colchester
- Model: MASTIFF VS
Equipped with: 16” 6 jaw chuck w/5.5 hole x 7.5 deep Taper attachment Variable speed spindle Sony 2 axis DRO Coolant Chip pan Special Note: The bed has above normal wear. Tolerances are: 7” front of bed (f...
- Trusted Seller
Milltronics 1740 CNC Flat Bed Lathe
- Manufacturer: Milltronics
Equipped with: Centurian 6 control 6 jaw chuck Aloris quick change tool post Chip pan Automatic lubrication
- Trusted Seller
TRAK 1630SX Manual/CNC Toolroom Lathe
- Manufacturer: TRAK
- Model: 1630SX
- Spindle bore: 53,848 mm
Equipped with: ProtoTRAK SLX CNC control Automatic lubrication system Coolant system 10” adjust through 3 jaw chuck Aloris tool post and holders
- Trusted Seller
Clausing Colchester 13" x 40" Toolroom Lathe 13"
- Manufacturer: Clausing/Colchester
- Model: 13
Equipped with: 8” 3 jaw chuck 10” 4 jaw chuck 10” face plate Foot operated brake Splash guard Removable chip tray
- Trusted Seller
Jet 16" x 60" Toolroom Lathe 1660-3PGH
- Manufacturer: JET
- Model: 1660-3PGH
Equipped with: Hardened bedways Newall 2 axis DRO 2 steady rests 12” 4 jaw chuck Bed stop system Foot brake 4 way tool post Back splash
Axelson Engine Lathe, 34" x 288", 25.5" SOC, Threading, Taper, Full Length Chip Pan
- Manufacturer: Axelson
Swing over bed ways: 34" | Swing over cross slide: 25.5" | Distance between centers: 288" | Spindle drive: 20 HP | Spindle speeds: 555 RPM | Chuck size: 18" | Condition: Very Good | Equipped with:: 3 Jaw Chuck, ...
Iowa, USA
2005 HAAS TL2
- Manufacturer: Haas
- Model: TL-2
Spindle Nose A2-5 Max Torque 108 ft-lbf @ 355 rpm Bar capacity: 2" | Chuck size: 8" | Spindle speed: 2,000 RPM | Spindle motor: 10 HP | X axis travel: 8" | Z axis travel: 48" | Rapid rate z axis: 450 IPM | Turret...
Acer E-Lathe 1440V Lathe
- Manufacturer: Acer
- Model: E-Lathe 1440V
Good condition Acer E-Lathe 1440V Lathes manufactured in 2020. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword