Used Machine Tools in Northern Ireland, United Kingdom

Brierley Drill Point Grinder Mounted on Single Door Cabinet

• Manufacturer: Brierley

Drill Size Range 1.5mm - 25mm. Point Angle 40° - 180°. Working Tilting Angle 0-20°. (1) 4-Jaw Chuck. Crompton Series 2000 Push Button Control. 'Gryphon B-Rise' Motor. Max Spindle Speed 3,600RPM.

Asquith NCA 4A6 Bridge Type Drilling Machine with Telemecanique NUM 720 CNC Control

• Manufacturer: Asquith

Table Size Approx 2,440mm x 1,450mm. Working Dimensions Approx 1,220mm x 1,830mm with (8) T-Slots. Load Carrying Capacity of Table Approx 3,000kg (Spread). Distance from Spindle Nose to Table Approx 450mm. Amount...

Cuoghi APE 40 Semi Automatic Twist Drill Sharpener Mounted on Single Door Cabinet

6-Jaw Precision Chuck. Sharpens Drills & Taps Range 2mm-40mm. Point Angle Grinding Range 40° - 180°. Push Button Control Panel.

Thonney Topermatic AS 315 Floor Mounted Heavy Duty Vibratory Tumbler

Dimensions of Tumbler Tank Approx 800mm x 350mm. S/No. 316.

Mark MSA 11kW Compressor with ES 3000 Digital Control

• Manufacturer: Mark

Running Hours 39,010. 8 Bar. Last Serviced 30/7/2025.

T Slot Table with EMV 8" Vice & Arbor Assembly Pot

Dimensions of Table Approx 1,200mm x 800mm x 800mm High. (5) T-Slots. Single Shelf

Mark MSA15 270 DG2 15kW Compressor with ES 3000 Control

• Manufacturer: Mark

Complete with Stand Alone Mark 'DRY(C55) A4 5015' Dryer, Built-In Receiver & Sterling CS75 Wall Mounted Water/Oil Separator

Mark MSA 11kW Compressor with ES 3000 Digital Control

• Manufacturer: Mark

Running Hours 21,521. 8 Bar. Last Serviced 30/7/2025.

Mark MSA 15kW Compressor with ES 3000 Digital Control

• Manufacturer: Mark

Running Hours 39,434. 8 Bar. Last Serviced 30/7/2025.

Hilka 150mm Double Ended Bench Grinder

3,000RPM, 1/2 HP, Power Supply 240 Volt

Alpina HG 8A 200mm Double Ended Bench Grinder on Fabricated Stand

Maximum Spindle Speed 2,850RPM. Size of Wheel 200mm x 25mm x 16mm Bore. 240 Volt Power Supply

Meddings Pacera Pillar Drill

• Manufacturer: Meddings

1/2" Capacity Drill Chuck, 2 Morse Taper. Table Size 250mm x 250mm. Spindle Speeds Approx 80-4,000RPM. Throat Depth Approx 200mm. Rise & Fall Table. S/No. MF22, 28969.

Herbert Single Spindle Pillar Drill

Table Dimensions Approx 330mm x 390mm with (2) T-Slots. 2-MT Arbor Fitted with 16mm Capacity Drill Chuck. Rise & Fall Table.

Ajax PD 16 16mm Capacity Bench Drill

(5) Gear, Spindle Speeds 455 - 2,630RPM. Rise & Fall Table, Dimensions 270mm x 270mm. S/No. 26939

Mengele H400 3 400 Tonne Vertical Press Brake with GWF DNC 80 CNC Control

• Manufacturer: Mengele

Cybelec V-DNC-83-PS CNC Control. Working Length Approx 4,000mm. Table Dimensions Approx 4,000mm x 250mm Deep with (3) T-Slots. Maximum Stroke Approx 500mm. 12mm Over Run Distance. Clearance 240mm. Operating Press...