Used Processing in Pennsylvania, USA

PAUL WURTH BLAST FURNACE TAP HOLE DRILL

• Manufacturer: Würth

Inventory id: 10769700000

1978 7.0 & 2.0 SQ IN BIRDSBORO COMBO FLYING HOT SHEAR

• Manufacturer: BIRDSBORO

Inventory id: 10452500000 | Product size: 3 / 1.6 | Sq. inches: 7.0 & 2.0 SQ. INCHES | Material shape (slab, bar, bloom etc.): ROUNDS, FLATS, STRUCTURAL | Type (hot or cold): HOT | Material shape (slab, bar, blo...

1982 36" (914 MM) WIDE X 18" (457 MM) DIA. ECOLAIRE TABLE

• Manufacturer: BAUER GEAR

Inventory id: 10765300100 | Table width: 36 | Roll face: 36 | Roll diameter: 18 | Length: 38.5 | Drive arrangement: INDIVIDUALLY DRIVEN | Number of rolls: 8 | Roll spacing: 66 | Roll fabrication (solid, hollow):...

SUTTON ENTRY ROLLER TABLE

• Manufacturer: Sutton

Inventory id: 10729000100 | Roll face: 24" | Roll diameter: 9" TO 5" | Length: 31'-6" | Number of rolls: 9 | Roll spacing: 40 | Roll fabrication (solid, hollow): HOLLOW | Roll bearing type (roller, sleeve): ROLL...

2010 24 KW 1800 SCFM 460 VOLT PNEUMATECH PE-1800 INDUSTRIAL AIR DRYER

• Manufacturer: PNEUMATECH

Inventory id: 20040200000 | Capacity: 1800 | Pressure: 150 | Type (rot screw/ reciprocating): HEAT REACTIVATED REGENERATIVE AIR DRYER | Operating hours: 43288 | Length: 112 | Width: 66 | Height: 118 | Weight: 55...

1999 3000 CFM ULTRAFILTER MODEL HRE3000 INDUSTRIAL DESSICANT DRYER

• Manufacturer: Ultrafilter

Inventory id: 20033100000 | Capacity: 3000 | Pressure: 100 | Length: 120 | Width: 70 | Height: 130 | Weight: 10,600

68' 7 1/2 DIA X 25" FACE INDIVIDUALLY DRIVEN TABLES 16 ROLLS ON 4' CENTERS FOR ANGLES AND SHAPES

Inventory id: 20081405400

157' INDIVIDUALLY DRIVEN ROLLER TABLE WITH APRON AND SIDE GUIDES, 24" FACE X 9-1/2" DIA

• Manufacturer: SMS Eumuco

Inventory id: 20053800000 | Table width: 24 | Roll face: 24 | Roll diameter: 9.5" WITH 1" WIDE LIP | Length: 157' | Drive arrangement: INDIVIDUALLY MOTOR DRIVEN | Roll spacing: 67 | Roll fabrication (solid, holl...

2013 87 FT INDIVIDUALLY DRIVEN BILLET ROLLER TABLE, 22" ROLLS, 14" FACE, 13" DIA

• Manufacturer: SMS / MEER

Inventory id: 20090300200 | Roll face: 14" | Roll diameter: 13" | Number of rolls: 22 | Motor volts: 460V | Motor voltage type (ac / dc): AC | Previous use: PREVIOUS APPLICATION WAS TO TRANSFER COLD BILLETS FROM...

1993 63 FEET OF INDIVIDUALLY DRIVEN ROLLER TABLE FOR ANGLES, CHANNELS, AND FLATS

• Manufacturer: Simac

Inventory id: 20081800200 | Roll face: 31.5" | Roll diameter: 10.5" | Number of rolls: 16 ROLLS ON 47" CENTERS | Gearbox ratio: 31.36 / 1 RATIO REDUCER | Motor hp: 1 HP | Motor rpm: 56 RPM | Motor voltage type (...

2012 MUELLER AT40-LF-150 HEAT EXCHANGER

• Manufacturer: Mueller

Inventory id: 20087800000 | New arrival: Y | Type or description: PLATE TYPE HEAT EXCHANGER | Pump type (gear, etc): RECIRCULATION | Body material (steel, iron): STEEL / STAINLESS PLATES | Previous use: WATER CO...

2013 700,000 CFM SCHUST ENGINEERING BAGHOUSE (NCO)

• Manufacturer: SCHUST ENGINEERING

Inventory id: 20034100000 | Capacity: 700,000 | Capacity per compartment: 70,000 | Type (shaker / reverse air / pulse air): REVERSE AIR | Number of compartments: 10 | Number of bags per module: 300 | Total numbe...

1988 180,000 CFM PANGBORN BAGHOUSE (NCO)

• Manufacturer: Pangborn

Inventory id: 10833800100 | Capacity: 180,000 | Capacity per compartment: 13,850 | Type (shaker / reverse air / pulse air): REVERSE AIR | Number of compartments: 14 | Number of bags per module: 64 | Total number...

30,000 CFM TWIN CITY MODEL BCN-SW BLOWER

• Manufacturer: Twin City

Inventory id: 20027300000 | Capacity: 30,000 | Pressure: 70 | Air/material handling/dust: AIR | Wheel dia: 66 | Drive type (direct/belts pulleys): DIRECT | Motor hp: 500 | Motor rpm: 1785 | Motor volts: 2300/416...

96/107.5 MVA, 34,500 PRI, 510.7-912.3 SEC, ABB FURNACE TRANSFORMER

• Manufacturer: ABB

Inventory id: 20061900000 | Power rating: 96/107.5 | Primary voltage: 34,500 | Secondary voltage: 510.7 - 912.3 (18 TAPS) | Load tap changer: YES | Phase: 3 | Hertz: 60 | Age: 1984 | Impedance percentage: 2.6% /...

Sullair 25-100L Industrial Compressor

• Manufacturer: Sullair
• Model: 25-100L

Good condition Sullair 25-100L Industrial Compressors available between 1976 and 1978 years. Located in USA and other countries. Click request price for more information.