- Trusted Seller
Yamada Dobby FP-60-SW
- Manufacturer: Yamada Dobby
YAMADA DOBBY MODEL FP-60-SW HIGH SPEED PUNCH PRESS W/ FEEDER 60 TON 900 SPM
- Trusted Seller
2000 YAMADA DOBY NXT-60
- Manufacturer: Yamada Dobby
Used double upright mechanical press Structure: Double upright | Press: Used | Boost:: 60 tons. | Sleigh ride: 15-50mm | Strokes per min: No. 800 | Slide adjustment: 50 mm | Mold light at pmi: 303 mm | Mold holde...
Borgone Susa, Italy - Trusted Seller
2001 YAMADA DOBY Alfa-45H
- Manufacturer: Yamada Dobby
Structure: Double upright | Press: Used | Boost:: 45 tons. | Push points: n ° 2 | Sleigh ride: 30 mm. | Number of strokes/min: 150 -1000 | Slide adjustment: 50 mm. | Pmi mold light: 260 mm. | Mold holder surface...
Borgone Susa, Italy 
1990 YAMADA DOBBY EH-60L
- Manufacturer: Yamada Dobby
- Stroke length: 30 mm
Current status: Repair | Power: 60t | Stroke length: 30mm | Spm: 100 - 350spm | Dh: 240mm | Aj: 50mm | Bolstor: 1080 x 470 x t230 | Slide: 820 x 360 | Bed opening: 600 x 180 | Motor: 7.5kw
Ibaraki, Japan2012 Yamada dobby FIT-3-0150
- Manufacturer: Yamada Dobby
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
2020 Yamada Dobby MAP-10L
- Manufacturer: Yamada Dobby
10t Stroke length 30 Stroke 150-850 Die height 250 Slide adjustment amount 10 Slide underside dimensions 500 x 300 Bolster dimensions 500 x 350 x 50 If there is a discrepancy between the contents and the actual p...
Tatebayashi, Japan
Manual for Used Yamada Dobby Press Machine Type FP-60SW-II – Machine Manual
- Manufacturer: Yamada Dobby
Manual Available :– Machine Manual *We only charge administrative fee for processing the manuals. PDF manuals will be emailed upon receiving payment. Kindly check your Spam/Junk folder if you did not receive the...
$70 USDSingaporeYamada Dobby PK-5DH
- Manufacturer: Yamada Dobby
5t Stroke length 40 Number of strokes 150 Die height 160 Slide adjustment amount 30 Slide bottom dimensions 106 x 115 Bolster dimensions 310 x 230 x 35 The photo shows the uncleaned state. If there is a discrepan...
$2,569 USDTatebayashi, JapanYamada Dobby PK-5DH
- Manufacturer: Yamada Dobby
5t Stroke length 40 Number of strokes 150 Die height 160 Slide adjustment amount 30 Slide bottom dimensions 106 x 115 Bolster dimensions 310 x 230 x 35 The photo shows the uncleaned state. If there is a discrepan...
$2,569 USDTatebayashi, Japan
60ton Transfer Press Yamada Dobby (1998.10)
- Manufacturer: Yamada Dobby
- Model: MP-60H
- Capacity: 60 kg
- Stroke length: 140 mm
ST : 140 mm DH : 310 mm Bolster : 1060 x 475 mm . Very good condition . Power on and Operable . A/S 가능
Siheung-si, South Korea
1998 Yamada Doby 10DH
- Manufacturer: Yamada Dobby
10TON Stoke length 30 Stroke number 75-120spm Die height 195 Slide adjustment 30 Bolster: 350*237*45
Okayama, Japan- Trusted Seller
2006 YAMADA DOBBY NXT-25I
- Manufacturer: Yamada Dobby
2006 Yamada Dobby NXT-25I High Speed Straight Side Press SPECIFICATIONS: EQUIPPED WITH: Free Standing CPU Controls Yamada Servo Feeder Digital Die Height Adjustment Guarding Around Die Area
Pomona, CA 
2000 YAMADA DOBBY NXT251
- Manufacturer: Yamada Dobby
* CAPACITY 250 KN * STROKE 15-30 MM * SPM 180 - 1100 * DIE HEIGHT 199 -200 MM * SLIDE AREA 640 X 320 MM * BOLSTER 640 X 450 X 115 MM * BED OPENING 500 X 80 MM
Ringwood, NJ
Tip: Enter manufacturer, model or keyword
