Used Processing in Virginia, USA

2022 Hoosier HFC 4043 Vibratory Feeder Bowl

• Manufacturer: Hoosier

Hoosier Feeder company vibratory feeder bowl, Purchased for a new production run and setup but never ran in production, stored in a climate controlled warehouse since then.

Siemens 3RW34

• Manufacturer: Siemens

As Is, Where Is Lot of 2 Siemens Sikostart Model: 3RW34. Both units were removed during a plant upgrade and were both working when removed.

Siemens 3RW34

• Manufacturer: Siemens

Lot of 2 Siemens Sikostart Model: 3RW34. Both units were removed during a plant upgrade and were both working when removed.

Lot of Light Fixtures

Lot of Light Fixtures Lot includes: 102 - 2' x 4' - 3-bulb Lay-In Fixtures. Aluminum Grid Cover Can ONLY NO Ballast NO Bulbs Taken out of service Sept/Oct 2025 Will be stored outside until pickup. Shipping not av...

FFM Fimotec-Fischer Montagetechnik Vibratory Feeder

• Manufacturer: Fischer

As Is, Where Is This listing is for an FFM Fimotec-Fischer Montagetechnik Vibratory Feeder. AC Voltage Requirements: 230/400 VAC Other Features: Dimensions: 53 x 51 x 79 in. (W x D x H) Tests performed: The unit ...

JAMESON 31-502SK-IP

• Manufacturer: JAMESON

As Is, Where Is Lot of (30) New MILITARY Light Kit JAMESON 31-502SK-IP Drash Basex Rugged sets of 2 EACH BOX CONTAINS (2) lights (60) Total Lights EMI Hardened String Light, Black Out Filter, Multi-Volt Flicker-F...

RDM Test Equipment HSM-4

• Manufacturer: RDM Test Equipment

This listing is for a RDM Test Equipment HSM-4 Mini Laboratory Heat Sealer 0-300 Degrees 0-100 psi 0.1-99.9 Sec Dwell Time AC Voltage Requirements: 115 VAC Serial Number: 6081 Tests performed: The unit powers on ...

Rennco LS18D-120

• Manufacturer: Rennco

As Is, Where Is This is a listing for a Rennco LS18D-120 Sealing Machine. The Rennco LS18D-120 specs are: 120 Volts, 5 amps electrical requirement; 18-inch package size; 2.5 seconds per seal speed. AC Voltage Req...

Kenig 9510-00-268-9546

• Manufacturer: Kenig

This listing is for a Case of 5 Kenig Gray Iron Casting Bars ASTM A48 4-in DIA x 1.50 FT LG. Intended for general engineering applications where tensile strength, excellent machinability, and vibration dampening ...

STNC TGI125X175

• Manufacturer: STNC

This listing is for a Lot of (2) STNC TGI125X175 Pneumatic Double Acting Air Cylinder GUI3000001D Tests performed: Performed a visual inspection. No obvious component damage noted Cosmetic Condition: Item is in g...

Rennco LS18D-120

• Manufacturer: Rennco

This is a listing for a Rennco LS18D-120 Sealing Machine. The Rennco LS18D-120 specs are: 120 Volts, 5 amps electrical requirement; 18-inch package size; 2.5 seconds per seal speed. AC Voltage Requirements: 120 V...

Danfoss MCE101A38R0P1K13E21TAW

• Manufacturer: Danfoss

This listing is for a Lot of (2) Danfoss VLT Brake Resistor MCE101A38R0P1K13E21TAW 38 Ohm/Braking ED at 1.13 kW Items are in good cosmetic condition Units pass visual inspection. No obvious component damage noted...

Festo DNCKE-63-500-PPV-A-S

• Manufacturer: Festo

Lot (2) Festo DNCKE-63-500-PPV-A-S Pneumatic Air Cylinder Items are in good used cosmetic condition The units pass a visual inspection and shows no signs of component damage Additional Information: Series: DNC (M...

Micro-Epsilon scanCONTROL

• Manufacturer: Epsilon

Listing for a Lot of (2) Micro-Epsilon LLT2810-100(009) scanCONTROL Triangulation Controller DC Voltage Requirements: 25 VDC Functional Condition: This is a quantity listing and the item shown is representative o...

FFM Fimotec-Fischer Montagetechnik Vibratory Feeder

• Manufacturer: Fischer

This listing is for an FFM Fimotec-Fischer Montagetechnik Vibratory Feeder. AC Voltage Requirements: 230/400 VAC Other Features: Dimensions: 53 x 51 x 79 in. (W x D x H) Tests performed: The unit was removed from...