Used Processing in Lower Silesian, Poland

2015 Krauss Maffei KM 1600 – 17200 MX
- Manufacturer: Krauss-Maffei
Krauss Maffei KM 1600 – 17200 MX Injection Molding Machine. Year of manufacture: 2015. General description: Modern injection molding machine with a fully hydraulic clamping system. Equipped with the advanced MC6 ...
Wrocław, Poland
2015 Krauss Maffei KM 900 – 8100 GX
- Manufacturer: Krauss-Maffei
Krauss Maffei KM 900 – 8100 GX Injection Molding Machine, Year of Manufacture: 2015 General Description: Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions on the fixed platen and 4 control...
Wrocław, Poland
2004 Engel DUO 11050/2300
- Manufacturer: Engel
Core drive: 2 hydraulic Cascades: 10 hydraulic (installed in the machine, expandable) Mould heating zones: 36 Plate type: magnetic (Tecnomagnete) Option: double injection and mould tilting system Control language...
Wrocław, Poland
2010 Battenfeld HM 110/350
- Manufacturer: Battenfeld
1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakit UNILOG B6 consisting of:- 07.D00 adjustment elements,- 02.K02 time-controlled air valve- 01.C01 hydraulic control of the NW 6 core on the cl...
Wrocław, Poland
2006 Krauss Maffei KM 160-750 CX
- Manufacturer: Krauss-Maffei
- Model: KM160-750CX
Man hours: 88581 | Injection weight [g]: 357 | Injection pressure [bar]: 1892 | Rated power of the pump motor [kw]: 22 | Heater power [kw]: 15,62 | Net weight with control cabinet [t]: 6,3 | Dimensions (length x...
Wrocław, Poland
2006 Krauss Maffei KM 160-750 CX
- Manufacturer: Krauss-Maffei
- Model: KM160-750CX
Man hours: 80892 | Short circuit force [kn]: 1600 | Dimensions of mounting plates (hxv) [mm]: 820 x 845 | Clearance between columns (hxv) [mm]: 520 x 520 | Min./ max. mold height [mm]: 300...650 | Maximum openin...
Wrocław, Poland
2015 Engel Victory 200/50 Spex
- Manufacturer: Engel
- Model: Victory
Man hours: 8567 | Short circuit force [kn]: 500 | Dimensions of mounting plates (hxv) [mm]: 500 x 450 | Clearance between columns (hxv) [mm]: lack | Min./ max. mold height [mm]: 200 | Maximum opening width [mm]:...
Wrocław, Poland
2008 Krauss Maffei KM 160 - 750 CX
- Manufacturer: Krauss-Maffei
- Model: KM160-750CX
The machine has recently undergone the following work: Two heaters and a thermocouple were replaced, the pump seal was replaced, the hydraulic hose was replaced and the mounting was secured in the pump area, the ...
Wrocław, Poland
2007 Krauss Maffei KM 250 – 1900 C1
- Manufacturer: Krauss-Maffei
Pressure tank Anti-vibration pads Additional information: 3 x core extractors 8 x hot runner control zones 2 x air valves Robot interface compliant with Euromap 67
Wrocław, Poland
2001 Krauss Maffei KM 800-5000 MC
- Manufacturer: Krauss-Maffei
- Model: KM800-5000MC
The machine is additionally equipped with: - Robot - Conveyor - Feeder - Batteries We have two identical machines
Wrocław, Poland
2015 Engel VC 330/180 tech
- Manufacturer: Engel
ENGEL ecodrive SHV2: Servo-driven hydraulic system with low energy consumption and minimal noise. Quick mold change: Hydraulic quick mold closure, 4-point, 300 x 300 mm. Core extractors: 3 hydraulic circuits wi...
Wrocław, Poland
2005 Battenfeld HM 270/1330
- Manufacturer: Battenfeld
- Model: HM 2701330
Pneumatic valve - 1 pc. Core - 3 pcs. Man hours: 112163 | Short circuit force [kn]: 2700 | Dimensions of mounting plates (hxv) [mm]: 1030 x 1020 | Clearance between columns (hxv) [mm]: 710 x 630 | Min./ max. mold...
Wrocław, Poland
2012 Battenfeld HM 300/1330
- Manufacturer: Battenfeld
Pneumatic valve - 4 pcs. Core - 2 pcs. Man hours: 65085 | Short circuit force [kn]: 3000 | Dimensions of mounting plates (hxv) [mm]: 1020 x 1030 | Clearance between columns (hxv) [mm]: 710 x 630 | Min./ max. mold...
Wrocław, Poland
2004 Krauss Maffei KM 2300 - 12000 MC
- Manufacturer: Krauss-Maffei
Clamping unit:Clamping force: 23000 kNMould opening force, max.: 1420 kNMoving platen feed force Opening: 227 kNMoving platen feed force Closing: 203 kNSize of mould platens (h x v): 2830 mm x 2400 mmDistance bet...
Wrocław, Poland
2015 HAITIAN JU4500II
- Manufacturer: HAITIAN
Technical parameters Mounting height [mm] min.-max. 350…850 Clearance between columns [mm]: 800x810 Opening stroke [mm]: 1050 Centring [mm] A.S.-D.S – 200 / 200 Ejector stroke [mm] (stroke / passage) – 250 / 200 ...
Wrocław, Poland