- Trusted Seller
Yield Engineering YES-15F HMDS Oven
- Manufacturer: Yield Engineering
- Model: YES-15
YIELD ENGINEERING YES 15 HMDS VAPOR PRIME OVEN consisting of:- Model: YES-15F- Up to 200 Degrees Celsius - Chamber Dimensions 16” x 16” x 16” with fixed shelf- 8 Heaters (200 Watt Each)- Temperature Controller- H...
Decatur, GA - Trusted Seller
Yield Engineering YES 18P Image Reversal Oven
- Manufacturer: Yield Engineering
- Model: YES
YIELD ENGINEERING YES 18P IMAGE REVERSAL OVEN consisting of:- Model: YES-18P - Lark Sequencer - Granville Phillips 275 Convectron Gauge - West 2050 Temp Controller - SN: 87785
Decatur, GA - Trusted Seller
Yield Engineering YES 15 HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-15
YIELD ENGINEERING YES 15 HMDS VAPOR PRIME OVEN consisting of:- Model: YES-15- Chamber Dimensions 16” x 16” x 16” with fixed shelf- 1700W Heaters- Temperature Controller- HMDS Cylinder- Logical Sequencer- Granvill...
Decatur, GA - Trusted Seller
Yield Engineering YES-15F HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-15
YIELD ENGINEERING YES 15 HMDS VAPOR PRIME OVEN consisting of:- Model: YES-15F- Up to 200 Degrees Celsius - Chamber Dimensions 16” x 16” x 16” with fixed shelf- 1700W Heaters- Temperature Controller- HMDS Cylinder...
Decatur, GA - Trusted Seller
Yield Engineering YES LPIII-M3 HMDS Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES-3
YIELD ENGINEERING YES LPIII-M3 HMDS VAPOR PRIME OVEN consisting of:- Model: YES LPIII-M3 - HMDS Vapor Prime and Vacuum Bake Oven - Chamber Dimensions Approximately 12" x 12" x 12"- No Shelf- 6 Heater- Temperature...
Decatur, GA - Trusted Seller
Yield Engineering 780-10197-01 Stainless Steel 200mm Wafer Boat KLA-Tencor New
- Manufacturer: Yield Engineering
Yield Engineering 780-10197-01 Stainless Steel 200mm Wafer Boat KLA-Tencor New Inventory # CONF-1030 This Yield Engineering 780-10197-01 Stainless Steel 200mm Wafer Boat KLA-Tencor is new surplus. The physical co...
$511 USDAlbuquerque, NM - Trusted Seller
Yield Engineering YES-6A Bake/Vapor Prime Oven
- Manufacturer: Yield Engineering
- Model: YES
This Yield Engineering Systems YES-6A Vacuum Bake/ Vapor Prime Oven looks to be in good cosmetic condition with signs of wear and previous use. It's missing the interrupt cover, but powers up as shown and I coul...
United States - Trusted Seller
Yield Engineering YES-450PB6 Polyimide Bake Oven
- Manufacturer: Yield Engineering
- Model: YES-450
150mm Refurbished
United States - Trusted Seller
Glen Technologies (Yield Engineering) R3A 500W low frequency Plasma Asher
- Manufacturer: Yield Engineering
- Model: R3
Glen Technologies (Yield Engineering) R3A 500W low frequency Plasma Asher PLC controlled and offers real-time plain English readout of system operating parameters together with remedial action in the event of an...
United States - Trusted Seller
Yield Engineering R3 Plasma Cleaner with 500w power supply @ 50Khz
- Manufacturer: Yield Engineering
- Model: R3
Plasma cleaner for hybrid devices microprocessor control with multi program capability down stream design for better uniformity 2 pull out shelves each 12.75"x12.75" three gas inputs each with needle valve fl...
United States - Trusted Seller
YES 450 PB6
- Manufacturer: Yield Engineering
- Model: YES-450
Yield Engineering Systems YES 450 PB6 Capacity 2 Cassettes of up to 6″ wafers Temperature Range Ambient to 450’C Interior Chamber Dimensions 10.75 (Barrel) x 7.5″H x 16″D
Billerica, MA - Trusted Seller
YES LP-III
- Manufacturer: Yield Engineering
- Model: YES
YIELD ENGINEERING YES LP-lll Vapor Prime Oven ID 12 x 12 x 13″ Deep Much easier to program than old OEM controllers Ready to ship ONE YEAR WARRANTY ON ELECTRONICS
Billerica, MA 
YES READRITE OVEN YIELD ENGINEERING SYSTEM
- Manufacturer: Yield Engineering
- Model: YES
INFORMATION YES YIELD ENGINEERING SYSTEM INC. MODEL YES READRITE System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We a...
Santa Barbara, CA
2015 Yield Engineering 450 PB12-2P-CP Polyimide bake oven for maximum 300mm wafers
- Manufacturer: Yield Engineering
- Model: YES-450
sn 89416 EXCEPTIONAL CONDITION FROM LOCAL IBM ALMADEN RESEARCH LAB Manufacture date 2015 Cooling fan 2000 scfm included Vacuum pump Edwards nXDS35i scroll pump REBUILT WITH NEW TIP SEALS included (or Sogevac ...
San Jose, CA
Yield Engineering YES 450 PB series Polyimide Bake Oven Upgrade and refurbishment
- Manufacturer: Yield Engineering
- Model: YES-450
Upgrade hardware and software of YES 450 PB6/PB8/PB12 polyimide bake oven Remove obsolete PLC and display screen including all internal components of controller Install new PLC, touch screen, EquipX proprietary...
Yield Engineering YES Surface Treatment / Cleaning
- Manufacturer: Yield Engineering
- Model: YES
Good condition Yield Engineering YES Surface Treatment / Cleanings manufactured in 2010. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
