Building Filters
- Trusted Seller
1998 Makino KGJP-55
used
- Manufacturer: Makino
- Model: KGJP-55
Machine specification ○ Digital XY2 axis display device ○ Table Work surface 1100mm×250mm T-slot 14mm wide x 3 ○ Main spindle Main spindle taper NT40 Spindle speed 130-2200 rpm, 8 gears Spindle motor 1.5kw Spindl...
Tokyo, Japan - Trusted Seller
1982 Makino KSJP
used
- Manufacturer: Makino
- Model: KSJP
Machine specification ○ Digital XY2 axis, min. display 0.005mm ○ Table Work surface 1100mm×250mm T-slot 14mm wide x 3 ○ Spindle shank NT40 Main spindle shank NT40 Spindle speed 75 - 4000 rpm (12 steps of belt cha...
Tokyo, Japan - Trusted Seller
1984 Shizuoka Works VHR-A
used
- Manufacturer: Shizuoka
- Model: VHR-A
Machine specification ○ Digital Sony 2-axis digital, minimum display 0.005mm ○ Table Working area 1100 ×280 mm Travel of each axis Table travel 820 mm (left/right) × 300 mm (front/back) × 450 mm (up/down) Main sp...
Tokyo, Japan - Trusted Seller
1967 Makino KJP
used
- Manufacturer: Makino
- Model: KJP
Machine specification XY Digital Magnescale with XY digital display ○ Table Working area 1100 x 250 mm T-slot width 14 mm x 3 Spindle shank No. 40 Main spindle shank No. 40 Spindle speed 225 to 4000 rpm, belt cha...
Tokyo, Japan - Trusted Seller
1983 Makino KSJP-55
used
- Manufacturer: Makino
- Model: KSJP-55
Machine specification ○ Digital XY2 axis display device ○ Table Work surface 1100mm×250mm T-slot 14mm wide x 3 ○ Main spindle Main spindle taper NT40 Spindle speed 75～4000rpm 12-stage belt Spindle motor 1.5kw Spi...
Tokyo, Japan - Trusted Seller
1994 Makino KGJP-55
used
- Manufacturer: Makino
- Model: KGJP-55
Machine specification ○ Digital XY2 axis display device ○ Table Work surface 1100mm×250mm T-slot 14mm wide x 3 ○ Main spindle Main spindle taper NT40 Spindle speed 130-2200 rpm, 8 gears Spindle motor 1.5kw Spindl...
Tokyo, Japan - Trusted Seller
2004 Iwashita Mfg. NK-1R
used
- Manufacturer: Iwashita Mfg.
Machine specification ○ Digital 3-axis digital, minimum display 0.005mm ○ Table Working area 1100mm×270mm T-slot width 16mm x 3 ○Spindle spindle Main spindle hole №40 Spindle speed 67～3000/80～3600rpm 50/60Hz Head...
Tokyo, Japan - Trusted Seller
1988 KANTO KT-10
used
- Manufacturer: KANTO
Machine specification ○ Digital XY2 axis digital, min. display 0.001mm ○ Table Working area 865mm×250mm T-slot width 16mm x 3 ○ Main spindle Main spindle shank NT40 Spindle speed 75～4000rpm 12 steps Spindle head ...
Tokyo, Japan - Trusted Seller
1971 Makino KJP
used
- Manufacturer: Makino
- Model: KJP
Machine specification ○ Digital XY digital display ○ Table Working area 1100 x 250 mm T-slot width 14 mm x 3 Spindle shank No. 40 Main spindle shank No. 40 Spindle speed 225 to 4000 rpm, belt changeover 10 steps ...
Tokyo, Japan - Trusted Seller
1980 Makino KJP
used
- Manufacturer: Makino
- Model: KJP
Machine specification ○ Digital 3-axis digital display ○ Table Working area 1100 x 250 mm T-slot width 14 mm x 3 Spindle shank No. 40 Main spindle shank No. 40 Spindle speed 225 to 4000 rpm, belt changeover 10 st...
Tokyo, Japan - Trusted Seller
2006 Mitsui Kosaku MSG-250H1
used
- Manufacturer: Mitsui Seiki
- Model: MSG-250H1
Machine Specifications ○ Operation type Semi-automatic type Table left/right automatic Chuck Tilting type, electromagnetic magnet Dimensions 300mm (width) x 120mm (depth) x 100mm (height) ○ Travel Table stroke 50...
Tokyo, Japan - Trusted Seller
2006 nicco f-515h
used
- Manufacturer: NICCO
Machine Specifications ○ Operation type Semi-automatic type Table left/right automatic Zero chuck Dimensions 315mm (W) x 110mm (D) x 110mm (H) Water-cooled sine bar type ‡ Travel Table stroke 500 x 250mm 〇 Grindi...
Tokyo, Japan - Trusted Seller
2006 KONDO CGK-1200H
used
- Manufacturer: Kondo
Machine specification ○Machine Specifications Grinding stone infeed is manually operated; automatic infeed function is not available. Hydraulic drive for table right/left feed and wheelhead rapid advance Digital ...
Tokyo, Japan 
5-axis double-column machining center Okuma VMP-10
used
- Manufacturer: オークマ(株)
- Model: VMP10
Commodity id: 951225KUN-1 | Maker: Okuma Corporation | Model year: 1997 | Specification: F-15MB Gate width: 1000 T:□800×2APC ATC-50 X-1650 Y-1000 Z-1000 B-150°(30 to +120°) B-±360 B-0.001 C-0.001 Loading weight:...
Tokyo, Japan
1998 Makino Milling Machine NC Milling Machine MSJ25-0
used
- Manufacturer: Makino Seiki
MSJ25-0 Motion range X-axis 350mm, Y-axis 250mm, Z-axis 300mm Main spindle end type JIS No. 30 Spindle speed 100 to 10000mm-1 Table 600x250 T-groove 14H8x3x63 pitch Total power capacity 14.9KVA Control FANUC 16M ...
Tokyo, Japan