Used Evaporators

Stainless Steel 316 Rodney Hunt Wiped/Thin Film Evaporator - IPP# 116939

• Manufacturer: Rodney Hunt

Turbo-film evaporator CS jacket jacket rated 150 psi @ 400 degree F. with 16" cone bottom. Unit driven by 15 HP, 3/6/440 volt, 1760 rpm motor. Rotor speed 690 rpm. Includes:134 Sq Ft, 10" diameter x 8' long 304 S...

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O

• Manufacturer: Organomation

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O is a reliable solution for efficient nitrogen evaporation in the lab. This model is ideal for laboratories nee...

Rising/Falling Film Evaporator 45.4 kg/h (100 lb/h) - IPP# 207655

• Manufacturer: Cream City Boiler

single effect evaporator 100 psi @ 350 degrees F in the jacket on the bottom 1/3 of straight side of tank only. 2097 liters.

Rising/Falling Film Evaporator 7,400 kg/h (16,350 lb/h) Graphite - IPP# 233950

water evaporation rate @5 lbs./Hr. per Sq. Ft. of surface area Fiberglass double effect falling film evaporation system Designed to operate with corrosive conditions The system includes the following major compon...

Zymark TurboVap 96 Concentration Evaporator Workstation

• Manufacturer: Zymark

The Zymark TurboVap 96 Concentration Evaporator Workstation, Part #71000/1, is a microprocessor-controlled evaporation system for simultaneous, automated concentration of multiple samples with unattended operatio...

Biotage TurboVap 96 Concentration Evaporator Workstation

• Manufacturer: Biotage

The TurboVap 96 Concentration Evaporator Workstation is a microprocessor-controlled evaporation system for simultaneous, automated concentration of multiple samples with unattended operation, convenience and spee...

Evaporator, 2-Effect, Rising Falling Film, Reverse-Feed, 316L Stainless Steel, Buflovak, #5991598

• Manufacturer: Buflovak

Buflovak / Hebeler double-effect reverse-fed rising/falling film evaporator system, designed for concentrating hydrolyzed slurry or similar food and protein-based liquids. Rated for approximately 6,500 lb/hr feed...

Stainless Steel 316 Luwa SMS HS0050 Wiped/Thin Film Evaporator - IPP# 102561

• Manufacturer: Luwa

jkt rated 16 kg/sq cm @ 200 deg C. 9 gal capacity W/(2) rows of str blades and (2) rows of positive pitched blades @ 25 deg angle on central core. Driven by 20 HP, 1170 rpm Reeves variable speed drive, 6.2:1 rati...

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215303

• Manufacturer: Luwa

jacketed horizontal wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts 323.9mm ID x 8450mm long x 7mm thick carbon steel jacket 368mm diameter...

Stainless Steel 321 Buhler Group OTW-500 Crystallizer/Evaporator Plastic - IPP# 219970

• Manufacturer: Bühler

stainless steel fluid bed crystallizer used on PET pellets with heated nitrogen total pressure drop, ca.30 mbar, differential pressure ca 2 mbar, design pressure pe=90 mbar product thickness ca.200mm approximate ...

Wiped/Thin Film Evaporator 47.6 kg/h (105 lb/h) Stainless Steel - IPP# 217500

• Manufacturer: Luwa SMS

Luwa wipe film evaporator jacket 4 bar, c/steel jacket 2 x 340mm diameter x 1.1m long clamped sections

Wiped/Thin Film Evaporator 97.5 kg/h (215 lb/h) Stainless Steel - IPP# 235999

• Manufacturer: Luwa SMS

wiped film evaporator. Jacket rated for Rated for 150 psi at 381 degrees F. Stainless steel rotor belt driven by a pully and motor. Diameter of body section jacket 19.2". Shell wall thickness 0.393 thick, Jacket ...

Stainless Steel 316 Votator Div 08-032 Wiped/Thin Film Evaporator - IPP# 101542

• Manufacturer: Votator

turbo-film evaporator 316SS/CS jkt jkt rated 150 psi @ 700 deg F Shell .250" thick, jkt .187" thick 12" x 20" entrainment section. Belt driven by US varidrive, 7 1/2 HP, 3/60/220/440 volt, output min 190 rpm, max...

Rising/Falling Film Evaporator 14,000 kg/h (30,850 lb/h) Stainless Steel Austenitic - IPP# 212762

• Manufacturer: Wiegand

single effect falling film evaporator system with mechanical vapour compression product feed 70,000 kg/hr @ 70 deg C and 12 Gew. -% NaOh, product outlet 56,000 kg/hr @ 73 deg C and 15 Gew.-% NaOH, steam consumpti...

Stainless Steel 316L Carl Canzler 900/6,0-K10 Wiped Film Evaporator - IPP# 211633

• Manufacturer: CARL GANZLER

Short Path wiped film evaporator system with internal condensor Includes 2.9m² SS cold trap Rated 2000 liter 95 liter in the jacket Top mounted rotor drive with a 3.7 kw, 50 Hz gear motor with mechanical seal on ...