Used Machine Tools in Ohio, USA

2000 PSI CHIPBLASTER "EV2000RI" HIGH PRESSURE HIGH VOLUME COOLANT SYSTEM

• Manufacturer: ChipBlaster

2000 PSI CHIPBLASTER "EV2000RI" HIGH-PRESURE HIGH-VOLUME COOLANT SYSTEM - 13 GPM - 50 gallon capacity - 10 HP 2000 PSI CHIPBLASTER HI-PRESSURE COOLANT SYSTEM Serial No 1810, Model EV2000RI EQUIPPED WITH: Inlet, O...

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26785 ALSO.

58" X 26" ALPHA-MAGNETS “AC2000SD” MAGNETIC CHUCK w/SD CONTROLLER - 19 SUPPORT BLOCKS

58" X 26" ALPHA-MAGNETS MAGNETIC CHUCK WITH CONTROLLER SERIAL NO 08G03.01, MODEL AC2000SD EQIPPED WITH: SD CONTROLLER (18) SUPPORT BLOCKS (3-ROWS OF 6) SPECIFICATIONS: Magnet, Length 58" Magnet, Width 26"

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & TAPPED ANGLE PLATE w/ADJUSTABLE EXTENSIONS

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & SLOTTED ANGLE-PLATE EQUIPPED WITH: (6) Slots On Face - (1) Slot On Top Threaded Mounting Holes Face & Top (4) Adjustable Mounting Arm Extensions (6) Eyebolts GENERAL SPEC...

2-1/2" X 10' (120”) SPEGO "506-20” TURNMATIC 5-SPINDLE HYDRAULIC BAR-FEED w/SELF-CONTAINED HYDRAULICS - (2) HEAVY-DUTY SUPPORT STANDS

• Manufacturer: Spego

2-1/2" SPEGO "TURNAMIC 506" 5-SPINDLE BAR-FEED Serial No 96-06-481, Model 506-20 EQUIPPED WITH: Hand And Auto Controls Forward And Reverse Controls Self Contained Hydraulic System (2) Heavy-Duty Support Stands CA...

Sharp Precision Tool 50" X 9" Table Vertical Mill

• Manufacturer: Sharp

Fagor Name: Vertical Mill | Arrival date: 10-13-2025 | Dimensions l x w x h (inches): 68 x 57 x 87 | Capacity: 50" X 9" TABLE | Electrical: 3/60/220/440 | Weight (lb.): 2180 | Available quantity: 1 | Make year: 2...

Niagara Ring And Circle Shear Z20058A

• Manufacturer: Niagara
• Model: 13RC

3 1/2" - 44" Circle Diameter Range 1 5/8" Diameter Of Cutters 34 1/2" Tail Stock Depth 9.25" Head Throat depth Capacity 16 Gauge mild Steel 1/2HP Motor Foot Pedal Control

60" X 32" X 5" DEVLIEG JIGMILL "TYPE-E" LAYOUT INDEX TABLE w/ADJUSTING BASE

• Manufacturer: DeVlieg

60" X 32" X 5" DEVLIEG "TYPE E" T-SLOTTED Imperial Metric INDEX/LAYOUT TABLE W/ADJUSTING BASE Serial No 11045, Type E EQUIPPED WITH: 36" x 36" x 2" Slotted Base For Adjusting Locating Hole Heavy-Box Section Casti...

(2) 33" X 55" X 36" HEAVY-DUTY GEARED ADJUSTABLE POSITIONING SLOTTED ANGLE PLATES

(2) 33" X 55" X 36" HEAVY-DUTY ADJUSTABLE POSITIONING SLOTTED ANGLE-PLATES Imperial Metric EQUIPPED WITH: MANUAL GEARED ADJUSTABLE POSITIONING (9) VERTICAL MACHINED SLOTS (3) HORIZONTAL MACHINED SLOTS GENERAL SPE...

G-18 MOORE JIG GRINDER Z23057

• Manufacturer: Moore
• Model: G-18

11" X 24" TABLE TABLE TRAVLES 19" LONGITUDINAL 11" CROSS TABLE TO WHEEL COLLET 2-18" SPINDLE COLUM WAYS 10" SPINDLE SPEEDS 40-250 RPM INFINITE SPINDLE FEEDS FROM 4 - 240 SPM TRAVEL 3-5/8" 40,000 RPM MOORE SPINDLE...

20" X 78" T-SLOTTED ANGLE PLATE w/(3) VERTICAL SLOTS - 4” PLATE THICKNESS

20" X 78" T-SLOTTED ANGLE PLATE Imperial Metric EQUIPPED WITH: (3) VERTICAL T-SLOTS GENERAL SPECIFICATIONS Plate Height 78" Plate Width 20" Plate Thickness 4" Weight Approximately 2300 LBS