Used Machine Tools

Lot of . Machine Tool and Taps

Location Illinois Lot # 86 System ID # 4741253 End Date Central Standard Time Start Date Central Standard Time Item # 4741254 Lot of Misc. Machine Tool and Taps

(Inv.54014) Mid Mill Innovations TDA-1220 Matt Drill System

Includes 6' x 11' Roll Conveyor with Stops, 12" x 20' Roll Case, 16" x 11' Vertical Belt Conveyor

Ati Industrial Automation Tool Changer - Qc111t

• Manufacturer: Ati Industrial Automation

New No Box Name: Tool Changer | Arrival date: 10-15-2025 | Dimensions l x w x h (inches): 10 x 7 x 3 | Weight (lb.): 8 | Available quantity: 1

Ati Tool Changer Unit - 9121-dl12-t

• Manufacturer: ATI

New Open Box Name: Tool Changer Unit | Arrival date: 09-29-2025 | Dimensions l x w x h (inches): 9 x 9 x 9 | Weight (lb.): 2 | Available quantity: 4

EXCELLO TOOL DBL END 14"

• Manufacturer: Ex-Cell-O

DBL END TOOL TILTING TABLE 14" DIA. WHEELS 10" X 22" BOTH SIDES

25" + 15" WORKHOLDING CHUCK FIXTURES AND A TAILSTOCK FOR SETUP ON A MILLING OR DRILLING MACHINE

25" x 15" INDEXING WORKHOLDING FIXTURES AND TAILSTOCK FOR MILLING MACHINE EQUIPPED WITH: Adjustable Tailstock 25" 4-Jaw Indexing Faceplate Fixture w/9" Hole Thru Spindle 15" 3-Jaw Indexing Chuck Fixture A Large P...

(Inv.52101) 2017 Oliver 6510.002 Dovetail Machine

Model: 6510.002 Serial: 1710570 Year: 2017 Power: 230 Volt 3 Phase Notes: This Machine Is New But Was In a Building That Had Fire In It So It Has Some Smoke Damage

(6) CAT50 TAPER TOOL HOLDERS. #0951720

(6) CAT50 TAPER TOOL HOLDERS

(9) CAT50 TAPER TOOL HOLDERS. #0951920

(9) CAT50 TAPER TOOL HOLDERS

(Inv.52103) Prairie State Machine Clamp Carrier

(Inv.52103) Prairie State Machine Clamp Carrier, Pneumatic Flattener

(Inv.51049) New Tech Machinery GM5 Roller Former Gutter Machine

Model: GM5 Serial: GM51090918

Strand 1/4 Hp Grinder - My4

• Manufacturer: Strand

Name: Grinder | Arrival date: 10-10-2025 | Dimensions l x w x h (inches): 29 x 28 x 51 | Capacity: 1/4 HP | Weight (lb.): 190 | Available quantity: 1

HUNTER DSP600 ALIGNMENT MACHINE

• Manufacturer: Hunter
• Model: DSP600

Hunter dsp600 alignment machine comes with a computer, stand , every part needed was pulled from shop and never reinstalled do you upgrading

Bilz 12mm, 3/16" Shank Diameter Cat50 Shrink Fit Tool Holder - Cat50adb-unc1

• Manufacturer: Bilz

New Open Box Name: Cat50 Shrink Fit Tool Holder | Arrival date: 07-23-2025 | Dimensions l x w x h (inches): 11 x 9 x 7 | Capacity: 12MM, 3/16" SHANK DIAMETER | Weight (lb.): 13 | Available quantity: 4

Wendt Wheel Dressing Machine - Wdm15/11

• Manufacturer: Wendt

Name: Wheel Dressing Machine | Arrival date: 07-17-2025 | Dimensions l x w x h (inches): 78 x 53 x 76 | Weight (lb.): 1650 | Available quantity: 1 | Make year: 1976