Used Materials Testing in Gauteng, South Africa

Three Gang Prism Shrinkage Moulds (UTA-0850E)

• Manufacturer: Labequip

Thermal and Weathering Properties Product Code: Description: The Three Gang Shrinkage Mould is used for the determination of the effect of aggregates on the drying, shrinkage and length change of hardened concret...

Le Chatelier Mould (UTCM-0014)

• Manufacturer: UTEST

Physical and Chemical Properties Product Code: Description: The soundness of cement, fly ash for concrete and lime is determined by using the Le Chatelier moulds and Le Chatelier Water Bath (UTCM-0016) according ...

Automatic Vicat Apparatus (UTCM-0550E)

Physical and Chemical Properties Product Code: The setting time determination of cement/mortar/gypsum is one of the most important parameters for the quality inspection and verification. The machine is based on t...

Solid Mould (UTCM-0670)

• Manufacturer: Labequip

Compression and Flexural Machines The UTCM-0670 Solid Mould is used to determine the water retention of masonry cement specimens. Due to the continuous development of our products, the goods supplied may vary in ...

Beam on two supports: shear force diagram (WP961)

• Manufacturer: Labequip

application of the method of sections to determine the shear force Description: WP 961consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point ther...

FULLY AUTOMATED UNCONFINED COMPRESSION SYSTEM (LoadTrac II)

• Manufacturer: Labequip

Advanced Soil Systems ASTM D-2166, AASHTO T-208 Unconfined Compression Testing of Soils ASTM D-1663 Compressive Strength of Moulded Soil-Cement Cylinders Description: The LoadTrac II load frame provides compressi...

Capping Retainers (UTC-0372A)

• Manufacturer: Labequip

Compression and Flexural Testing Machines Product Code: Description: Unbounded Cap is used for determining of compressive strength of hardened concrete cylinders as alternative method to the sulphur hot capping o...

Skid Resistance and Friction Tester (UTA-0830/E)

• Manufacturer: Labequip

Mechanical and Physical Properties Product Code: The Skid Resistance and Friction Tester is used for the measurement of surface friction properties. The apparatus is suitable for both site and laboratory applicat...

Vibrating Compaction Hammer (UTC-0944)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: UTC-0944 Vibrating Compaction Hammer with the shank and tamping plate is used for moulding cylindrical test specimens which are used for testing compressive o...

V Funnel (UTC-0540)

• Manufacturer: UTEST

Fresh Concrete Testing Description: The UTC-0540 V Funnel apparatus is used to evaluate the flow time of freshly mixed self-compacting concrete. The test is not suitable when the maximum size of the aggregate exc...

ATOMIC 2000KN CONCRETE CUBE PRESS COMPLETE WITH CONTROLLER (LESC001)

• Manufacturer: Atomic

The Atomic Concrete Cube Press frames for concrete cubes consist of a rigid four column frame. Our frames provide the stability needed for accurate and repeatable test results, over the years of operation. The fr...

J-Ring, Narrow Gap, EN (UTC-0520E)

• Manufacturer: Labequip

Fresh Concrete Testing Product Codes: Description: The J-Ring Test is used for determining the passing ability, the flow spread and the t500Jflow time of self-compacting concrete as the concrete flows through the...

Universal Cutting Machines (UTC-1020)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: The UTC Series Universal Cutting Machine has been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens. Special cla...

Digital Bond Strength /Pull-off Tester (UTC-3250)

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Description: 16 kN measurement capacity apparatus is used for determining of bond/pull-off strength of repair mortar, hardened renderin...

Bleeding of Freshly Mixed Concrete (UTC-0720)

• Manufacturer: Labequip

Fresh Concrete Testing Description: UTC-0720 is used for determination of the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete. Due to the continuous development of our pr...