Used Processing in Kansas, USA

CLEVELAND #7 REAMER AND ARBOR #7 OAL 11"

• Manufacturer: Cleveland

“DOES HAVE SURFACE RUST” CLEVELAND #7 REAMER FLUTE LENGTH: 1-1/2" NUMBER OF FLUTES: 12 OVERALL LENGHT: 11" SHANK TYPE: STRAIGHT #7 ARBOR CUTTING DIRECTION: RIGHT HAND WEIGHT: 2LBS HJL#253-SK26-1-MAT

SHAFT G42 T600 39" X 2"

“OLD STOCK, SURFACE RUST” SHAFT G42 T600 39" X 2" SHAFT G42 T600 39" X 2"Length – 39"Diameter – 2”Key way – 4-3/4” long – ¼” WEIGHT: 34 LBSPLEASE READ BEFORE BIDDING, MAKING AN OFFER, OR PURC...

HOT ROLLED COILED STEEL GRADE ASTM A36 NOM. THICKNESS 3/8IN WIDTH 4" SET OF 2

“MAY HAVE SHELF WEAR” HOT ROLLED COILED STEEL GRADE ASTM A36 NOMINAL THICKNESS 3/8IN NOMINAL WIDTH 4" PRN 29561 SET OF 2 APPROX DIMENSIONS 52"X9" APPROX WEIGHT: 3728 LBS MB/#19/SURPLUS/(1)ABI

WELD NECK FLANGE, 24" PIPE, CLASS 300, OUTSIDE DIAMETER 36"

WELD NECK FLANGE, 24" PIPE, CLASS 300, OUTSIDE DIAMETER 36" UNKNOWN BRAND WELDING NECK FLANGE 24" PIPECLASS 300OUTSIDE DIAMETER 36"THICKNESS 2.75"RAISED FACE DIAMETER 27.25"LENGTH THROUGH HUB 6.63"POINT OF WELD 2...

UNBRANDED SOLID HEIM ROD END BODY LENGTH 5/8" THREAD LENGTH 2-3/8" LOT OF 10

• Manufacturer: Heim

“OLD STOCK” CONTROLTEK SURFACE TAGE ADHESIVE BASE RIGHT ANGLE **LOT OF 100** BOLT, ALIGNMENT TAG AXLE BOLT, ALIGNMENT TAG AXLELENGTH:10-1/4"BOLT: 1"PLATE: 3-1/4"THREAD: 16THREAD LENGTH: 2-5/8"PLEASE READ BEFORE B...

STAINLESS STEEL SHEET LENGTH 24" WIDTH 24" THICKNESS 1/16"

“MAY HAVE SHELF WEAR/HAS SOME DENTS” STAINLESS STEEL SHEET LENGTH 24" WIDTH 24" THICKNESS 1/16" APPROX OAD:24 X 24 X 1/16" WEIGHT: 4 LB KS/1598/WM SVM/(1)BC

ALUMINUM 6061 FLAT ROLLED PLATE LENGTH 12" WIDTH 12" THICKNESS 1"

“MAY HAVE SHELF WEAR” ALUMINUM 6061 FLAT ROLLED PLATE LENGTH 12" WIDTH 12" THICKNESS 1" ALLOY GRADE 6061 APPROX WEIGHT: 19LBS OAD: 12X12X1" KS/1593/WM SVM/(4)BC W/PROFORM METALS

MCMASTER-CARR 8924K88 3FT HIGH-STRENGTH 1045 CARBON STEEL ROD

“SURFACE RUST.” MCMASTER-CARR HIGH-STRENGTH 1045 CARBON STEEL ROD 3 FEET LONG 3-5/8" DIAMETER PART NO. 8924K88 SHIPPING DIMENSIONS 42X5X5" *CUSTOM READ BEFORE BIDDING, MAKING AN OFFER, OR PURCHASING . YOU WILL RE...

0.015" BRASS PLATED WIRE 40 LBS WIRE (NO SPOOL) 44.8 LBS (W SPOOL) 10" SPOOL

“MEASUREMENTS ARE ESTIMATES ONLY” BRASS PLATED WIRE 0.015" 40 LBS BRASS WIRE (NO SPOOL) 44.8 LBS (WITH SPOOL) SPOOL ID: 5-1/4" SPOOL OD: 10" OAD: 10" X 10" X 6" WEIGHT: 45 LBS HG-28181-SC9 A-1-(1)-EBAY

2006 Peterbilt Chemical Treater Truck

• Manufacturer: Peterbilt

Engine: C13 CAT | Chemcial tanks: Six Pack | Pump: Centrifugal & Triplex | Miles: 544,834

NOVATEC HOPPER DRYER DCS-25M

• Manufacturer: Novatec

“OLD STOCK” NOVATEC DRYING HOPPER WITH MCD-3000 MICROPROCESSOR CONTROLLER MODEL: DCS-HOPPER SERIAL: 10-910-2013 CAPACITY: 60# 460V 8.8KVA 3 PHASE 11.1 AMPS 25 LBS/HR MCD-3000 MICROPROCESSOR CONTROLLED DRYER INDIC...

NOVATEC HOPPER W/ ROLLING STAND & DESICCANT DRYER W/ DISPLAY CONTROLS

• Manufacturer: Novatec

“MAY HAVE SHELF WARE” NOVATEC HOPPER W/ ROLLING STAND & DESICCANT DRYER W/ DISPLAY CONTROLS MICROPROCESSOR DRYER MCD-3000 MODEL NO. DCS25M 120-D03 300087861 SERIAL NO. 109100001 460V 3 PHASE 60HZ 8.8 KVA 11.1 AMP...

DRI- AIR ARID-15 DRYER W/INSULATED HOPPER W/DRI-AIR MOISTURE MONITOR MODEL 1000

• Manufacturer: DRI-AIR INDUSTRIES

“NOT TESTED.” DRI- AIR ARID-X15 DRYER W/INSULATED HOPPER MODEL ARID-15 SERIAL NO. D 6951 460 VOLTS 3 PHASE 10 AMPS MODEL 1000 DRI-AIR MOISTURE MONITOR INCLUDES A DRYING HOPPER W/LOADER MOUNTED ON CARBON STEEL FRA...

LEPEL HAND-HELD INDUCTION SEALER TR-300, 115V, 5.2A, 60HZ, TYPE:19133040

• Manufacturer: Lepel

“MAY HAVE SHELF WEAR” LEPEL HAND-HELD INDUCTION SEALER P/N: TR-300 TYPE: 19133040 SERIAL # 8434 VOLTS: 115 AMPS: 5.2 CYCLE: 60 HZ PHASE: 1 OAD: 21" X 12" X 14" WEIGHT: 63 LBS NRB/#6794/ WB 1V/ (1)WB LEPEL HAND-HE...