Used Sheet Metal Processing

SFA CNC Servo Sheet Metal Folding Machine (0,3 – 4 mm thickness / 2050-4200 mm length)

0,3 – 4 mm thickness / 2050-4200 mm length Clamping beam with 350 mm opening height and 170 mm high, segmented goat foot tools. Dual drive clamping beam with ball screw spindle system for more clamping power. 150...

MFE CNC Servo Sheet Metal Folding Machine (0,3 – 5 mm thickness / 2050-4200mm length)

0,3 – 5 mm thickness / 2050-4200mm length Clamping beam with 180 mm opening height and dual servo driven ballscrew spindle system. 30° single piece sharpnose tool. 15 and 40 mm wide folding beam tools, single pie...

MFB CNC Motorized Sheet Metal Folding Machine (0,3 – 3 mm thickness / 2050-4200mm length)

0,3 – 3 mm thickness / 2050-4200mm length 220 mm opening height capacity on the upper beam. Eccentric upper beam power transmission system for rapid clamping/unclamping. 1000 mm servo backgauge system with feathe...

REIS TUS 160

• Manufacturer: Reis
• Model: TUS-160

Used 1998 REIS Model TUS 160 hydraulic mold spotting and tryout press. 100-ton capacity, 4-post design, 61" W x 71" L bed area, 39.37" stroke, and 41.33" opening. Includes swing down platen and sliding table for ...

MFD CNC Motorized Combi Sheet Metal Folding Machine (0,3 – 3 mm thickness / 2550-4200mm length)

0,3 – 3 mm thickness / 2550-4200mm length 200 mm opening height capacity on 180° rotating clamping beam with 2 tool stations as 100 mm high segmented goat foor tool and 20° single piece sharpnose tool. Eccentric ...

MFA CNC Servo Combi Sheet Metal Folding Machine (0,3 – 4 mm thickness / 2050-4200mm length)

0,3 – 4 mm thickness / 2050-4200mm length Dual drive clamping beam with ball screw spindle system for more clamping power. 250 mm opening height on 180° rotating combi clamping beam with 2 tooling stations as 125...

7075-0 Sheet Metal - 40+ Sq Ft

May have some cuts made. 20+ Sq Ft of .063", 25+ Sq Ft of .032"

7075-0 Sheet Metal - .071" - 30+ Sq Ft

May have some cuts made.

7075-0 Sheet Metal - .040" - 40+ Sq Ft

May have some cuts made.

Binks Paint line

• Manufacturer: Binks

"Paint line is a continuous chain on edge line with a primer booth, flash oven, spray booth and curing oven. The entire paint line is clean and functional. Located in Two River, WI "

MFG CNC Motorized Sheet Metal Folding Machine (0,6 – 2 mm thickness / 2550-3200 mm length)

0,6 – 2 mm thickness / 2550-3200 mm length 750 mm servo backgauge with feather fingers Erfold basic cnc LBL software on 15’’ touchscreen controller 20°/R1 sharpnose tool on clamping beam 10 and 25 mm wide folding...

MFG CNC Motorized Sheet Metal Folding Machine (0,3 – 2,5 mm thickness / 2050-3200 mm length)

0,3 – 2,5 mm thickness / 2050-3200 mm length 180 mm opening height capacity on the upper beam. Eccentric upper beam power transmission system for rapid clamping/unclamping. 10 and 25 mm wide single piece folding ...

Piranha P-36 Sheet Metal Processing

• Manufacturer: Piranha
• Model: P-36

Good condition Piranha P-36 Sheet Metal Processing manufactured in 1989. Located in USA and other countries. Click request price for more information.