Used Processing

Urschel Laboratories GA

• Manufacturer: Urschel
• Model: GA

Model # GA Dicer, stainless steel construction with stainless steel contact surfaces. Equipped with safety disconnects, 208 Volt, 3 Phase, 2 Hp. electric motor. Set up with 3/8" dice change parts.

Urschel Dicer L

• Manufacturer: Urschel

Used Food Slicer For Sale

Dings Overbelt Magnet

• Manufacturer: Correa

30" wide by 5' long Dings Overbelt Magnet 30" Wide 5' Long Good rectifier Comes with the stand Buyer responsible to disassemble and transport Selling as-is where-is.

SKU 1724417 - PALLET OF ASSORTED OSAKA DIAMOND DIAMOND WHEELS

PALLET OF ASSORTED OSAKA DIAMOND DIAMOND WHEELS

Honeywell C7076A1007 Ultraviolet Flame Detector

• Manufacturer: Honeywell

“SHELF WEAR” Model number: C7076A1007 | Mpn: C7076A1007 | Shipping weight: 7 lbs | Shipping dimensions: 14 x 8 x 7 in | Additional notes: SHELF WEAR | Reference sku: 1701933

Komax ST-40411B Stainless Static Mixer 4in X 10in X 10in

• Manufacturer: KOMAX

“New without Factory Packaging” Model number: ST-40411B | Mpn: ST-40411B | Shipping weight: 295 lbs | Shipping dimensions: 33 x 26 x 19 in | Reference sku: 1067743

Sankyo Oilless 405235-10 SUWC-180-3-130 Cam Unit Assembly

• Manufacturer: Sankyo

“New without Factory Packaging” Model number: 405235-10 SUWC-180-3-130 | Mpn: 405235-10 SUWC-180-3-130 | Shipping weight: 515 lbs | Shipping dimensions: 33 x 17 x 16 in | Reference sku: 1066169

Yoshikawa CF-200TSR-DV Circle Feeder 200v-ac

• Manufacturer: Yoshikawa

“DIFFERENT CONFIGURATION” Model number: CF-200TSR-DV | Mpn: CF-200TSR-DV | Shipping weight: 144 lbs | Shipping dimensions: 41 x 22 x 19 in | Additional notes: DIFFERENT CONFIGURATION | Reference sku: 910577

2004 Coleman Light Plant

• Manufacturer: Coleman

2004 Coleman Light Plant for sale. Condition: Kubota engine. Was not started at time of auction listing. Equipment has been out of service and sitting for a while. Battery may be dead, if applicable. Overall cond...

Mikro-ACM-Pulverizer, Model 60ACM, 60 HP

• Manufacturer: Mikro

Mikro-ACM-Pulverizer, Model 60ACM, 60 HP Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 60 hp, 220/440 volt motor,1700 rpm motor, separato...

Mikro-ACM-Pulverizer, Model 60ACM, 75 HP

• Manufacturer: Mikro

Mikro-ACM-Pulverizer, Model 60ACM, 75 HP Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 75 hp, 230/460 volt motor,1800 rpm motor, separato...

20" x 37" Rotex Screen, 2 Deck, Model 12

• Manufacturer: Rotex

20" x 37" Rotex Screen, 2 Deck, Model 12 Used 20" x 40" Rotex screen, model 12, stainless steel decks and bottom pan, aluminum cover, two-deck design on stand with 1 hp, 208-230/460 volt motor.

Quadro Comil, Model 196S, S/S

• Manufacturer: Quadro

Quadro Comil, Model 196S, S/S Used Quadro Comil, model196S, stainless steel construction, 7.5 hp, xp motor, serial# 196-0841.

Bauermeister Pin mill, S/S

• Manufacturer: Bauermeister

Bauermeister Pin mill, S/S Used Bauermeister pin mill, model UTL-316-SS, stainless steel product contact surfaces, pin mill wheel driven by 3 hp, 230/460 volt, 3450 rpm motor, feed by Accurate volumetric feeder, ...

Plant Maintenance Vertical Scrubber Column, C/S, 15#

• Manufacturer: Plant Maintenance Service Corp.

Plant Maintenance Vertical Scrubber Column, C/S, 15# Used Plant Maintenance vertical scrubber column, carbon steel construction, rated 15 psi and full vacuum at 250 f internal, serial# AD-229, national board# 572...