Used Machine Tools in Saxony, Germany

POREBA top slide

• Manufacturer: Poreba

Top slide with 4-fold steel holder POREBA 4-fold steel holder, 2 pieces used, tested !

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I160 Torque adjustable in 8 steps max. 110 Nm 160 rpm 220 / 380 V 3AC 0.75 kW Splined shaft profile according to TGL 0-5471 for further clamping drives s...

POREBA Luenette

• Manufacturer: Poreba

Luenette, bezel, setting stick POREBA suitable for Poreba TPK-80 ! used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, steady rest, fixed PAGUS used, tested !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TC 280 x 900 ( TC280x900 ) 220 / 380 V used, tested !

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 ( DH315x3 ) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm ( left-hand thread ) bore: Ø 30 mm, depth: 55 mm used, tested !

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 315 x 3 ( DH315x3 ) TGL 30-2333 3x threaded hole: M12 x 1.75, depth: 30 mm used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 centering Ø: 139 / 135 mm, depth: 19 mm ( conical ) used, tested !

TOS 3-jaw chuck

• Manufacturer: TOS

3-jaw chuck, three-jaw chuck TOS 100/3-1-M1 New ! N: max. 5300 rpm | Outside ø: 100 mm | Centering ø: 80 mm | Hole circle ø (chuck): 90 mm | Bore ø: 23 mm | Height with jaws: 69 mm | Dimensions ( lathe chuck ): 1...

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 200 x 3-III ( DH200x3-III ) TGL 30-2333 New !

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4 ( DH315x4 ) TGL 30-2333 with chuck key used, tested !

WMW ERFURT PYE 160 neuwertig

• Manufacturer: Erfurt

draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diamete...

METAKON drilling machine

• Manufacturer: METAKON

Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video: