CARDWELL KB750 DRILL RIG #3982T
used
- Manufacturer: Cardwell
Rated 8,500’ with 4-1/2” drill pipe, (1) Detroit 60 engine 14L 650hp, Cardwell 112’ x 300,000# mast, Century 17-1/2” x 44” rotary tble, Ideco 160 ton Block, King 150 ton swivel, Regan 10” 3000 psi annular BOP,...
FAILING 2000 DRILL RIG #7544Ta
used
- Manufacturer: Failing
Mounted on tandem axle trailer, triple drum drawworks, (2) Detroit 471 engines, 58’ derrick, chain pulldown, 5-1/2 x 8 Gardner Denver mud pump, 18” table, travelling block, leveling jacks, stored inside since ...
ATLAS COPCO RD20-III DRILL RIG PACKAGE #1710T
used
- Manufacturer: Atlas-Copco
- Model: RD20 III
2008 RD20III Tridem 5-axle Carrier with Air Conditioning, HR2.5 1250/350 Compressor with Disconnect Cummins Engine, 120,000 Hook Load, 30,000 lb Pull-down, Range 3 Tower, Original 1100 hrs. 6300 ft of 30-ft ...
$2,750,000 USDOceanside, NY
IDECO H44 DRILL RIG #3977T
used
- Manufacturer: Ideco
1000 hp trailer mounted drill rig, (2) Detroit 60 Series engines 475 hp each @ 1800 rpm, 117’ x 450,000# derrick, 17’ adjustable substructure, Century 17-1/2” x 44” rotary tble, National 160 ton Shorty block, ...
DRILTECH T25K DRILL RIG #899Ta
used
- Manufacturer: Driltech
Manufactured 2004, 1000/350 air compressor with 75km, Cat deck engine with 6500 hours, mounted on 2004 Sterling truck with Mercedes engine, approx 500’ drill pipe (300’ on rig), excellent condition Price: $5...
Oceanside, NY
IDECO H44 DRILL RIG #3981T
used
- Manufacturer: Ideco
Drive in, rated to 6500’ with 4-1/2” drill pipe, (2) Detroit 871 engines (305 hp each), Ideco 108’ x 268,000# mast, 12’ H telescoping substructure, Dreco 150 ton block, ZP 17-1/2” x 44” rotary table, V-door ca...
CHALLENGER 360 DRILL RIG #836T
used
Challenger 360 drawworks (500 HP) (rated to 6,500' with 4 1/2" drill pipe), (1) Series 60 12.7 liter 500 HP, Challenger 200 - 84' H - 300,000# SHL derrick,, 10' adjustable substructure, HT - 18" x 44" rotary t...
REICHDRILL T690W DRILL RIG #10495T
used
Built 1998, 1100/400 GHH compressor (1350 hours since rebuilt with new cooler, new separator filter, new Hercules controls and butterfly), Cat 3406B deck engine (1900 hours since rebuilt with new starter and n...
PORTADRILL TG600 DRILL RIG #1184T
used
- Manufacturer: Portadrill
Manufactured 1974, Noster tophead w/3” King swivel, Atlas Copco DT4 715/125 air compressors, Failing 5 x 6 mud pump with pit, 30,000# pulldown, double drum 2-part 5/8” drawworks for casing line/tophead w/brake...
SCHRAMM T450WS DRILL RIG #5110Ta
used
- Manufacturer: Schramm
Manufactured 2004, 900/500 Sullair air compressor (Rebuilt with 50 hours-includes new hoses and new clutch), Cat 3406 diesel deck engine (only 2,000 hours), Floating Tophead Cushion Sub, DTH Hammer Lubricator,...
FOREMOST DR24 DRILL RIG #2038T
used
a) Upgraded head, rebuilt lower table, on Western Star with Cat C15 engine (2000 hours since C15 rebuild), 7500 hours on Sullair compressor, 44km on truck, good operating rig, full set ups with rods, handling ...
Oceanside, NY
CROWN CE900SED SCR DRILL RIG #3976T
used
- Manufacturer: Crown
Crown Phoenix CE900SED single drum drawworks Lebus grooved f/1-1/4” drill line, p/b (1) 1000 hp traction motor with gblower p/b 10 hp electric motor, Eaton Fuller 238 aux brake, CJZ250 deadline anchor, opertor...
FOREMOST DR24 DRILL RIG #927T
used
900/350 Sullair compressor, mounted on 1998 Western Star truck with approx 23,500 miles, foam injection, diesel engine pre-heater, spare parts Price: $815,000
$815,000 USDOceanside, NY
FOREMOST DR24 DRILL RIG #6841T
used
Model DR12/26P-60/24-1070, Built 2006, 1070/350 Ingersoll Rand air compressor, mounted on 2006 Kenworth T800 (wide nose) triaxle truck, Cummins engine, 26’ top drive stroke, 20’ lower drive stroke, powerturn/e...
Oceanside, NY
GARDNER DENVER 3000 DRILL RIG #3385T
used
- Manufacturer: Gardner Denver
High Back, mounted 3 axle trailer, Cat 3406B, 5 speed Allison, single drum with sandline, 8 line block and hook, 1 drill line spool on front of rig, 122 Parmac brake, air controls, stand pipe, 4th valve kelly ...
Ingersoll Rand T2W Drilling Rig
used
- Manufacturer: Ingersoll Rand
- Model: T2W
Good condition Ingersoll Rand T2W Drilling Rigs manufactured in 2002. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
