Used Presses

100 TON THOMSON-NATIONAL “28X41” CLAMSHELL-DESIGN HEATED PLATEN DIE CUTTING & CREASING PRESS w/MINSTER AIR CLUTCH & BRAKE - 45” X 31” MAXIMUM SHEET SIZE

• Manufacturer: Minster
• Capacity: 100,000 kg

28X41 THOMSON-NATIONAL CLAMSHELL-DESIGN HEATED-PLATEN Imperial Metric DIE CUTTING & CREASING PRESS Model 28X41 EQUIPPED WITH: 28x41 Heated Platen (Serial No 1492) Minster Combination Air Clutch & Brake (24-14581)...

200 TON DAKE “19-525” H-FRAME TRAVELING-HEAD HYDRAULIC STRAIGHTENING PRESS w/78” BETWEEN HOUSINGS - 40” STROKE

• Manufacturer: Dake
• Model: 19-525
• Capacity: 200,000 kg
• Stroke length: 1,016 mm

200 TON DAKE "H"-FRAME TRAVELING-HEAD HYDRAULIC STRAIGHTENING PRESS SERIAL NO 190373, MODEL 19-525, EQUIPPED WITH: SLOW DOWN, FAST RAISE, FRAME FORWARD, SLOW RAISE, LOCK FRAME, FRAME REVERSE, UNLOCK FRAME, FAST D...

66 TON AIDA GAP FRAME PRESS

• Manufacturer: Aida
• Model: NC1-600
• Stroke length: 139.95 mm
• Shut height: 299.72 mm

This used 66-ton AIDA Gap Frame Press, model NC1-600(2)E, is designed for versatile industrial applications. It has a stroke length of 5.51 inches and a slide adjustment range of up to 2.7 inches, allowing for pr...

2000-Ton Verson,TL-S4-2000-216-108 Transfer Press

• Manufacturer: Verson
• Model: TL-S4-2000-216-108

2000-Ton Verson,TL-S4-2000-216-108 Transfer Press Tonnage: 2000T Bed Opening: 248" x 108" Bed Size: 216" x 108" Link Drive Model: TL-S4-2000-216-108 Rating: ½” BDC DIE SPACE: 240” x 108” Bolster Size: 216...

1970 45 TON MINSTER “5F” FLYWHEEL-TYPE O.B.I. PRESS w/SCREW TYPE INCLINING MECHANISM

• Manufacturer: Minster
• Model: 5F
• Capacity: 45,000 kg
• Stroke length: 76.2 mm

45 TON MINSTER O.B.I. PRESS Imperial Metric New 1970, Serial No 5F-18736, Model 5F EQUIPPED WITH: Air Clutch & Brake Flywheel Drive Screw Type Inclining Mechanism CATALOG SPECIFICATIONS: Tonnage Capacity 45 TON S...

2248 Ton Schuler Hydraulic Press (Never Installed)

• Manufacturer: Schuler

2248 Ton Schuler Hydraulic Press Mfg: Schuler Model: 2248 YOM: 2011 - Never Installed Total Press Capacity: 2248 Tons Retraction Capacity: 185 Tons Slide Capacity: 13227 Tons Slide Area: 177" x 98" Slide ...

2500-Ton Schuler HZPU-T 2250-4600-2450 Hydraulic Press

• Manufacturer: Schuler

2500 Ton Schuler Hydraulic Press Mfg: Schueler Model: HZPU-T 2250-4600-2450 Bed Size: 180" x 96" Equipped With: Bed Size: 4600 x 2450 mm/ 180'' x 96'' Stroke: 61'' Slide Closing Speed: 1417'' / minute Wor...

Hydraulic Press Cutter

Berry Hill Dole Hydraulic Press Cutter

88 TON HELLER/SUTHERLAND "MARK-88" SINGLE-CRANK GAP FRAME PRESS w/VARIABLE-SPEED DRIVE - AIR COUNTERBALANCE

• Manufacturer: Sutherland
• Model: MARK-88
• Capacity: 88,000 kg
• Stroke length: 149.86 mm

86 TON HELLER/SUTHERLAND SINGLE CRANK Imperial Metric GAP FRAME PRESS Serial No 0120, Model MARK-88, EQUIPPED WITH: Twin Air Counterbalance In Frame Variable Speed Drive 4" Thick Bolster Plate Overload Protector ...

45 TON MINSTER "5" FLYWHEEL-TYPE O.B.I. PRESS w/VARI-SPEED DRIVE - AIR CUSHION

• Manufacturer: Minster
• Capacity: 45,000 kg
• Stroke length: 101.6 mm

45 TON MINSTER "5" O.B.I. FLYWHEEL PRESS Imperial Metric Serial No 5SS-25931, Model 5 EQUIPPED WITH: Variable-Speed Drive Flywheel Drive 5.7 Ton Air Cushion w/2" Stroke (100 PSI) Recirculating Lubrication System ...

17" x 18" Racine Hydraulic Press

• Manufacturer: M Roth GmbH & Co

17" x 18" Racine Hydraulic Press Used 17" x 18" Racine up acting hydraulic press, electrically heated platens, approximately 9" daylight, 11" diameter cylinder, with onboard 7.5 hp, 230/460 volt hydraulic power p...

75 TON MINSTER "7" DIE-NAMIC FLYWHEEL-TYPE O.B.I. PRESS w/VARI-SPEED DRIVE - AIR CUSHION

• Manufacturer: Minster
• Capacity: 75,000 kg
• Stroke length: 101.6 mm

75 TON MINSTER "DIE-NAMIC" OBI PRESS Imperial Metric Serial No. 7D-SS-26447, Model 7, Series DIE-NAMIC EQUIPPED WITH: Air Clutch & Brake Flywheel Design 15 HP Eaton "Dynamatic" Variable Speed Drive Die-Namic Die ...

15 Ton Carver Press, Model 3888, 6" x 6"

• Manufacturer: Carver

15 Ton Carver Press, Model 3888, 6" x 6" Used Carver platen press, model 3888-1DI0A00, 15 ton capacity, 6" x 6" platens, heated platens with temperature contoller, press controls, .25 hp pump, 120 volt, serial# 3...

2013 220 AIDA MODEL NC1-2000(2)E GAP FRAME PRESS

• Manufacturer: Aida
• Model: NC1-2000(2)
• Capacity: 220,000 kg
• Stroke length: 248.92 mm

The 2013 AIDA NC1-2000(2)E gap frame press is a reliable choice for high-precision industrial applications, offering a capacity of 220 tons. Its stroke length of 9.84 inches and slide adjustment of 4.33 inches al...

2007 16 TON SAVAGE "CFS16" C-FRAME HYDRAULIC STRAIGHTENING PRESS w/RAM POSITION CONTROLLER - ADJUSTABLE STROKE

• Manufacturer: Savage

16 TON SAVAGE "C"-FRAME HYDRAULIC STRAIGHTENING PRESS New 2007, Serial No 2517, Model CFS16 EQUIPPED WITH: Savage Ram Position Controller (RPC) Pushbuttons - Hand Lever Adjustable Stroke CATALOG SPECIFICATIONS: T...