Used Processing in Belgium

1974 Impact breaker HAZEMAG AXMANN

• Manufacturer: Axmann

External dimensions: 2100 mm x 1150 mm, h. 1200 mm | Motor: 11 kW, 15 hp, 1460 rpm, 220/380 V | Opening: 500 mm x 400 mm | Rotor width: 450 mm

Lance for temperature measurment SIDERMES with wall display

• Manufacturer: SIDERMES

With cable Weight: 10kg | Lenght: 1600mm | Useful dimensions: 600mm et 600mm

Endoscope KINOPTIK

• Manufacturer: KINOPTIK

with electric cable and light flexibles-cable in wooden box

Moulding machine HEINRICH WAGNER HRP1.1

• Manufacturer: Heinrich Wagner

Outer dimensions: length: 850mm; width: 1300mm; height: 1950mm Moulding box min: lenght: 450mm; width: 350mm Moulding box max: length:1000mm; width: 600mm With control board and emergency stop

Thickness measurement with ultrasound KRAUTKRAMER BRANSON

• Manufacturer: Branson

Type DME DL Dimensions: 250 ×230×120mm | Plage de mesure: 0,5mm à 300mm

1999 Gazing unit LÜBER LW FDA 3250 32 kW

• Manufacturer: Lüber

32kW; 400V; 50Hz Dimensions: Lenght: ±1500mm; Width: ±900mm; Hight: ±1800mm The control for the gazing cycle is controled by the core shooter the unit is equiped by a smal amin vessel (±2l) with connection to a c...

Vibrating conveyor JML 10000mm ×2000mm

• Manufacturer: JML

Outer dimensions: length: 11000mm; width: 2300mm; height:1200mm Inner dimensions: length: 10000mm; width: 1900mm; height: 150 mm Driven by 1 motor (15KW) With eccentric axle, driven by 5 V-belts Without counter s...

Vibriting conveyor JML 1350mm×2000mm

• Manufacturer: JML

Weight: 32t (2 parts: 15t and 17t) Outer dimensions: Length: 14000mm; Width: 2950mm; Height:1750mm Inner dimensions: Length: 1350mm; Width: 2000mm; Height: 150 mm Driven by 1 motor (15KW) With eccentric axle, dri...

Roller conveyor curve, width 1000 mm, 45 °

Roller Ø 89 mm Length 2x 440 mm Robust Weight: 160 kg | Dimensions: length 2370 / 1600 mm

Rubber belt conveyor 3600 mm, useful width 500 mm

External dimensions: length 4550 mm, width 1050 mm, height 950 mm Sensor at the 2 borders With funnel

1981 Green sand mixer EIRICH DWV 29/6, 6000 l

• Manufacturer: Eirich

With hydraulic discharge flap With 2 whirlers (swirler), 160 kW each With 2 cup drive motor, 150 kW each

Bunker, ± 2 m³, with discharging conveyor

External dimensions: length 4400 mm, width 1650 mm, height 2050 mm Dimensions of belt: length center distance 3650 mm, width 600 mm Plastic lining inside the bunker Drive via V-belt to slip on gear box

2018 Pouring ladle ACETARC, with transport foot, ± 1600 kg

External dimensions: length 1600mm, width 1350mm, height 1700mm With useful lining With one long and one small spout With bold-on trunnions With transport foot for lift tracs With heat protection With type plate ...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...