Used drill

Clausing 20" Variable Speed Drill Press Weld Table 48x48" Wilton Bullet Vise

• Manufacturer: Clausing/Colchester
• Model: 1789

Tested in good working condition Drill press is Model 1789 Single phase 115V 3/4Hp 14" throat. Moorse taper No 2. Wilton bullet vise 4.5" wide. Just under a half turn of play. Older unit. No model. Weld table is ...

14" Delta Floor Type Drill Press

• Manufacturer: Delta

14" Delta Floor Type Drill Press, Single Phase, 1HP, w/ Tapping Head, 11" x 16" Table, S/N: 104-3973

POWERMATIC 1200 #0999524

• Manufacturer: Powermatic
• Model: 1200

2 HP 230V 3Ph Spindle speeds(infinitely variable): 125 – 2000 RPM | Spindle travel: 6″ | Spindle taper: 3MT with #14 chuck | Drill to center of circle: 20″ | Throat to column: 10″ | Quill diameter: 2-3/4″ | Table...

22" Arboga E830 Geared Head Drill Press

• Manufacturer: Arboga

22" Arboga E830 Geared Head Drill Press, w/ 20" x 20" Table, 2.2 / 1.8kw, S/N: 186154

POWERMATIC 1200 #1005324

• Manufacturer: Powermatic
• Model: 1200

Hp: 2 | Voltage: 230 | Spindle speeds(infinitely variable): 125 – 2000 RPM | Spindle travel: 6″ | Spindle taper: 3MT with #14 chuck | Drill to center of circle: 20″ | Throat to column: 10″ | Quill diameter: 2-3/...

Lamina A10048SH Magnetic Drill Head Hydraulic Power Unit Portable Mag Tap I-Beam

• Manufacturer: Lamina
• Model: A10048SH

Used, in Good Working Condition. Tested. 480V Hydraulic unit. Not sure it can be wired for 230V 3Ph. Controls can. Drill head A10048SH #1 stub taper Stroke is 3" Looks like it was made for heavy continuous use. I...

14" Delta Bench Type Drill Press

• Manufacturer: Delta

14" Delta Bench Type Drill Press, Single Phase, w/ 10" x 10" Table, 1/3HP, Tapmatic 50X Tapping Head

JET JDP-20MF Step Pulley Drill Press, 20" Swing, Serial 22021577

JET JDP-20MF Step Pulley Drill Press, 20" gap, 1.5 HP motor, speed range of 150-4200 RPM, 3/4" chuck size, table size of 18-1/2 x 16 inches, spindle travel of 4-3/4 inches, dimensions of 66 x 20 x 30 inches, weig...

Delta 15-126 Drill Press, 3/4 HP

• Manufacturer: Delta

Delta 15-126 Drill Press, 3/4 HP, 250-1720 RPM, 15" x 15" table size, Morse Taper #2 spindle, 3/4" drilling capacity in steel, dimensions 30" x 20" x 65", weight 350 lbs, voltage 120V/240V, single phase, Serial N...

SEARS-CRAFTSMAN 113-21371 DRILL PRESS

• Manufacturer: Craftsman

SEARS-CRAFTSMAN 113-21371 DRILL PRESS S/N:, (110/60/1 electrics), S-5091 Standard Specifications: *Additional specifications available upon request*