Used drill

Delta 17-959L Laser Drill Press 17" Single Phase 120V 3/4Hp 250-2720RPM

• Manufacturer: Delta
• Model: 17-959L

Used, in Good Working Condition. Tested. This unit has adjustable belt speed. 215-2750 output RPM Top belt tensioner is not true. Bent but works. Not sure is it would go away if set at a different speed. 8.5" thr...

Rockwell Delta 66-369 Drill Press, 1/2 HP

• Manufacturer: Rockwell

Rockwell Delta 66-369 Drill Press, 1/2 HP, 230/460V, 3 Phase, 1725 RPM, Approx. Table Size 18 x 24 in, Likely MT2 Spindle Taper, Approx. Max Drilling Capacity 1 inch, Adjustable table height, belt-driven

DAITO High Speed Drill for Structural Steel Model SDNFC 050 40" X 20" Capacity, 3 Spindles

• Manufacturer: Daito

DAIT0 High Speed Drill for Structural Steel Model SDNFC 1050 40" X 20" Capacity, 3 Spindles DAITO'S DNF and SDNF Model 3 spindle drilling machines, drill and/or mark I beams from three different sirections simult...

Bellows Valvair DFE-2-360 Drill Press Power Feed Electric Over Pneumatic 36141 C

• Manufacturer: Bellows Valvair

In Good Used Condition. Electric Actuated Pneumatically Driven If this item ships as Flat Rate Freight please see details in Shipping tab

ROCKWELL 15-665 DRILL PRESS

• Manufacturer: Rockwell
• Model: 15-665

ROCKWELL DRILL PRESS SN: 1633831, (460/60/3 electrics), S-4758 Standard Specifications: * Inquire for additional specifications *

DELTA 17-900 DRILL-PRESS

• Manufacturer: Delta

DELTA 17-900 DRILL-PRESS S/N:9140, (110/60/1 electrics), H-1838 Standard Specifications: *Inquire for additional specifications*

Enco 128-4010 Radial Arm Drill Press 32" x 10" 220V 2.2kw 3Ph 80-2000RPM

• Manufacturer: Enco
• Model: 128-4010

Used, in Good Working Condition, Tested OK. Has a 18x16" riser table. T slot type. 24x36" bed. 32" spindle head travel. Morse Taper #4 22" Height adjust of the arm on the column. Spindle stroke 10". 80-2000 rpm. ...

(Inv.55001) Powermatic 1150 Multi Spindle Drill Press

• Manufacturer: Powermatic

(Inv.55001) Powermatic 1150 Multi Spindle Drill Press

Unbranded Drill Press

You are bidding on a Unbranded Drill Press. This item is in good working condition. This Item was used and is located at Penn State University. If you would like to inspect this equipment prior to bidding, please...

Walker Turner No. 900 Drill Press, Electric

• Manufacturer: Walker Turner

Walker Turner No. 900 Drill Press, electric, estimated 1/3 HP motor, approximately 60 in (152 cm) height, estimated weight 150 lbs (68 kg), general industrial wear visible

2024 Solberga/Willis geared head Drill press

• Manufacturer: Solberga
• Model: SE

Direct gear drive with fiber to steel mesh helical drive gears providing smooth, quiet operations, 20" Throat, 25mm 1" capacity, with Power feed option Two speed, 1.5 HP motor and electrics, Table with raising m...

FCG-610 CHEVALIER BENCH-TYPE UNIVERSAL TOOL & CUTTER GRINDER w/MICROSCOPE

• Manufacturer: Chevalier
• Model: FCG-610

FCG-619 CHEVALIER BENCH-TYPE UNIVERSAL TOOL & CUTTER GRINDER w/DINO-LITE DIGITAL MICROSCOPE - maple bench cabinet - Imperial Metric FCG-610 CHEVALIER BENCH-TOP UNIVERSAL TOOL & CUTTER GRINDER w/DINO-LITE DIGITAL ...

Rockwell Delta 17-600 Drill Press 17" #2 Morse Taper 5" Stroke 3/4 HP 230/460V

• Manufacturer: Rockwell
• Model: 17-600

Used, in Good Working Condition, Tested. This has a #2 Morse Taper. Has adjustable speed. Max height is 45" to the floor bed. Table bed is 17x12.5. Has a 5" stroke. Takes 3 Ph 230/460v power. Wired for 230V If th...

2013 Ficep 1001 DDB Drill & Saw Line with Material Handling

• Manufacturer: Ficep
• Model: 1001

Features: Ficep Pegaso CNC Control (1) Monospindle 180 Degree Rotary Drilling Spindle For Drilling On 3-Sides (6) Position Tool Changer Scribing Carriage Feed 65' Powered Infeed Conveyor With Transfers 40' Outfee...

2002 Franklin HD145 x 44 CNC Drill Line

• Manufacturer: Franklin

Features: Franklin CNC Control (Upgraded 2016) Drives and Electronics (Upgraded in 2016) Infeed Hydraulic Pinch Roll Drive for Measuring & Driving Lead Section of Material Pressure Switch Material Detection for S...