Used forging

- 661 listings found
Sort by Price: Low to High | High to Low
  • 700 TON NATIONAL MAXIPRESS FORGING PRESS

    • Manufacturer: National
    • Stroke: 8"

    700 ton national maxipress spm .................. 90 stroke ............... 8" shut height .......... 21-9/16" - 22" tie rod dia. ......... 6-3/4" floor space .......... rl 8'11" fb 8'6" h...

    No price
    Newark, NJ, USA
  • 100 TON WILKINS & MITCHELL HOT FORGING PRESS

        Rebuilt and retrofit 2017 to hot forge bolt tonnage 100tons capacity m42 dia length 800 stroke 8" spm 45 shutheight 24" bed area 30" (front to back) 40" (left to right) equipped w...

        No price
        Newark, NJ, USA
      • ZTS LE-250

        • Manufacturer: ZTS
        • Capacity: 250.00 ton 2491 kN

        Height listed is above floor total height is 142 inches (3610 mm)

        No price
        Washington, PA, USA
      • 1984 ZTS LE-400 Gap / C Frame Cold Press

        • Manufacturer: ZTS
        • Capacity: 400.00 ton 3985 kN
        • Stroke: 6.30 in 160.00 mm

        Throat size 18 inch (450mm), height shown is above floor level, number of strokes admitted per minute 20

        No price
        Washington, PA, USA
      • 1975 GFM SX 55 10112

        • Manufacturer: GFM
        • Weight: 700 Ton

        2 automated forging manipulators 4 hammers force: 1,000 ton each | stroke per minute: 200 | maximum forging diameter: 550 mm | maximum clamping diameter: 550 mm | approximate machine weight: 700 ton | foundation ...

        No price
        Marietta, GA, USA
      • H280/V180 10425

        • Manufacturer: SEC
        • Weight: 8,000 kg

        rolling force: 180 ton | ring weight, max: 8,000 kg | taper cone angle: 32 degree | main roll diameter: 1,000 mm | rolling force, max: 280 ton | rolling speed, max: 1.5 / sec | horizontal stroke of mandrel: 600 ...

        No price
        Marietta, GA, USA
      • 1983 Aida CFT-60 600-Ton Cold Forging Press DANA00000453

        • Manufacturer: Aida

          Open time: 12 july 2017 12:00 am et / close time: 28 december 2017 05:00 pm et 1983 aida cft-60 600-ton cold forging press. serial number: 16100-0017. dim: 117 w x 6060mm l x 6390mm. h. stroke 250"". est. weight ...

          No price
          Querétaro, Mexico
        • MODEL NO. SE2-2500-132X66, 2500 TON BLISS PRESS

          • Manufacturer: Bliss

            Equipped with: stations - 3 ejector tonnage - 100 ton specifications: tonnage.........................................2500 ton stroke..........................................60" strokes / min....................

            No price
            Warren, MI, USA
          • Vaccari BF/10P Forging presses

            • Manufacturer: Vaccari
            • Stroke: 470 mm

            stroke: 470 mm | dimensions: 4950 x 2470 x 1700 mm | shut heigt: 840 mm | total weight: 19.6 t | driving power: 30 kw | diameter of screw: 250 mm | table size (front to back): 800 mm | table size (left to right)...

            No price
            Reinach, Switzerland
          • Hydraulik Duisburg 25 t Forging manipulators

            • Manufacturer: Hydraulik Duisburg

              dimensions: 8800 x 4360 x 3500 mm | load moment: 52 mt | ultimate load: 25 t | mode of operation: oil hydraulic | type of manipulator: schienengebunden

              No price
              Reinach, Switzerland