Building Filters
- Trusted Seller

Daikin-McQuay 250 Ton Centrifugal Magnetic Bearing Mag Chiller WMC250DSC
- Manufacturer: Daikin
We recommend a new OTIS operator touchscreen interface for this machine. This will come with a new solid state PC, touch screen, and power supply. Compressor 1 does not show historical communication data at thi...
- Trusted Seller

Budzar Industries Water Heater System - 1WT-930-DSP
- Manufacturer: Budzar
Budzar Industries Water Heater System Model No: 1WT-930-DSP Serial No: 200901-14797 Field Wiring Diagram: B14797-ES Largest Motor HP: 1.5 HP Enclosure Type: 12 460 Volt, 3 Phase Rapid Exchange Time: 1 min/cu.ft. ...
- Trusted Seller
120 Sq Ft Chem Flowtronics Coil Condenser, Hastelloy, 150#
- Manufacturer: Chem Flowtronics
120 Sq Ft Chem Flowtronics Coil Condenser, Hastelloy, 150# Used 120 sq ft Chem Flowtronics hastelloy coil condenser, model 450/60, set up with (2) 60 sq ft coils stacked on top of each other, hastelloy tube rated...
Cleveland, OH - Trusted Seller

Alfa Laval Heat Exch Plate M10
- Manufacturer: Alfa-Laval
- Model: M10
Alfa Laval, Model M10, stainless steel, plate and frame heat exchanger. Approx 350 total ft² heat transfer area with a flow rate of 1 to 45 gallons per minute – depending on materials, application and machine con...
Carol Stream, IL - Trusted Seller
Mueller AT40 F20 Accu-Therm Plate Heat Exchanger 100PSI 150°F 4" NPT 150# Flang
- Manufacturer: Mueller
In good used condition 4" NPT ports 32 plates If this item ships as Flat Rate Freight please see details in Shipping tab
$2,800 USDMillersburg, IN - Trusted Seller

Single Pass Heat Exchanger Heat Exchanger #13134
- Manufacturer: Single Pass Heat Exchanger
Custom built continuous single pass sanitary heat exchanger, consisting of 48" long x 1. 5" sanitary pipe with tri clamp connectins and 40" long jacketed body (4" diameter) with upper and lower inlets. Former use...
Marlboro, NJ 
2012 MUELLER AT40-LF-150 HEAT EXCHANGER
- Manufacturer: Mueller
Inventory id: 20087800000 | New arrival: Y | Type or description: PLATE TYPE HEAT EXCHANGER | Pump type (gear, etc): RECIRCULATION | Body material (steel, iron): STEEL / STAINLESS PLATES | Previous use: WATER CO...
Pittsburgh, PA- Trusted Seller

Daikin-McQuay 250 Ton Centrifugal Magnetic Bearing Water Chiller WMC250DSC
- Manufacturer: Daikin
Model WMC250DSC-ER10 Overall dimensions: 134" L x 52" W x 92" H Weight = 7,710 LBS
- Trusted Seller

HOFFMAN NITROGEN COOLER - MODEL 8FSU165186
- Manufacturer: Hoffmann
DESIGN PRESSURE: 180/-15 PSIG, DESIGN TEMPERATURE: 300° F, TEST PRESSURE: 225 PSIG. MATERIAL: PIPE: SA-53 GR B, FLANGES: SA-105, RETURN BENDS: SA-234 GR WPB, FIN STOCK AND STRUCTURAL FRAME: CARBON STEEL. COOLER...
$3,850 USDMillwood, WV - Trusted Seller
Single Pass Heat Exchanger Heat Exchanger #13136
- Manufacturer: Single Pass Heat Exchanger
Custom built, stainless steel, single pass heat exchanger, featuring 1" diameter x 30" long product tube with 28" long jacketed body x 2. 5" od in stainless steel, 3/4" jacket inlet and outlet set on opposing end...
Marlboro, NJ 
Koolant Kooler SCV-20000-2PR-NF Heat Exchanger 20 Ton Chiller Heat Exchanger
- Manufacturer: Koolant Koolers
Koolant Kooler Heat Exchanger Removed from 20 Ton Chiller - Model of Chiller Model #: SCV-20000-2PR-NF Unit was Parted out - Heat Exchanger has no damage. R-22 Evacuated from Exchanger Exchanger Dimensions:
$2,500 USDCedarburg, WI- Trusted Seller

Votator Heat Exch Scrape Surface 936635
- Manufacturer: Votator
Votator, A and B unit Shortening system components.Upper unit: Ammonia jacketed, 6 x 72 Votator 2 with a Chrome Nickel tube, 4.5" shaft with rotary joint, Celcon blades, una/Neoprene Elastomers, Carbon vs Chrome...
Carol Stream, IL - Trusted Seller

Cherry Burrell Heat Exch Plate SI-50
- Manufacturer: Cherry Burrell
Stainless steel, plate and frame heat exchanger, 76 sq ft. Has 38 plates 13 1/4 " W x 45" L x 1/4" Thick, and 2 1/4" in/outlet with sanitary couplings. 120 psi rating.
Carol Stream, IL - Trusted Seller
IMI Rycroft SP104-B10 Supapac Plate Heat Exchanger 300kw 35GPM 38 Plate 6" ANSI
- Manufacturer: IMI Rycroft
Used Surplus, Acquired From Spare Parts Storeroom. This a 300kw unit. It says it does 200 Rate (m2/h). Not sure if this equals to 35 gpm. Has 6" ANSI flange 8 bolt pattern. 150 psi This has 38 different plates. I...
$2,125 USDMillersburg, IN - Trusted Seller

ALABAMA HEAT EXCHANGER 50 Sq. FT.
- Manufacturer: ALABAMA HEAT EXCHANGER
Used Approximately 50 Square Foot Shell/Tube Heat Exchanger Manufacturer: Alabama Heat Exchanger 6" diameter X 10' long
Hainesport, NJ
