• JOHANSSON SINGLE SPINDLE

    • Manufacturer: JOHANSSON

      geared head 16 spindle speeds 36-900 rpm ******#5 mt in spindle********* 6" spindle travel spindle feed ***variable 0.00-.320 per rev. tapping cycle 6" spindle travel 16" head travel (up/down) 16" knee travel (up...

      No price
      Cleveland, OH, USA
    • WILTON (ARBOGA) GEARED HEAD 20" SINGLE SPINDLE

      • Manufacturer: WILTON

        (arboga) geared head made in sweden pedestal type 20" swing 5" spindle travel drill chuck 18" x 24 3/4" t-slotted swivel table geared head with 8 spindle speeds 120 - 1640 r.p.m. spindle to table 32" 2 speed 1.0...

        No price
        Cleveland, OH, USA
      • EPAK Automatic 4 Station Spindle Capper #12575

        • Manufacturer: EPAK

          automatic 4 station spindle capper304 stainless steel frame construction304 stainless steel and anodized aluminum internal componentscap sorting elevator, stainless steel with 8 cu.ft. hopperanodized aluminum cap...

          No price
          Ball Ground, GA, USA
        • CINCINNATI ROYAL 18 MULTI SPINDLE DRILL HB-20507

          • Manufacturer: Cincinnati

            size: 18" 3 spindle | drill heads: 3 | quill travel: 6” | spindle taper: #3 mt | coolant table: 24” x 52” | speeds (5 steps): 390 – 3,100 rpm | drill to center of circle: 18”

            $2,750
            Bethlehem, PA, USA
          • 1999 Doosan V550T Twin Spindle

            • Manufacturer: Doosan
            • Spindle Nose: A2-11

            heads: 1 (ram) | swing: 30.75" | control: fanuc | chuck size: (2)20 | travels (x): 12.2" | travels (z): 24" | spindle nose: a2-11 | spindle power: 30 hp | spindle speed: 2,000 rpm | machine weight: 38,000 lbs | ...

            No price
            Novi, MI, USA
          • Buehler Supermet Two Spindle 10965-00

            • Manufacturer: Buehler

              wheel diameter: 12" wheel speed (rpm): 1800 approximate dimensions (wxdxh) 60" x 27 ½" x 38" mdna approximate weight (lbs): 600 electrical requirements (v, hz, ph): 115, 60, 1 & 220, 60, 3 utility requirements: ...

              No price
              Warren, MI, USA
            • Coborn SK-KKAS Skive Spindle (1.5kW)

              • Manufacturer: Coborn

                coborn sk-kkas scaif (skive) spindle with advanced functionality. for polishing & faceting single crystal diamond: natural and lab-made this 3-phase spindle was previously tested at cline innovations using a stur...

                No price
                Leominster, MA, USA
              • CLAUSING 4-SPINDLE DRILL HB-20306

                • Manufacturer: Clausing

                  dimensions: 66” lr x 36” fb x 72” h weight: 1,330 lbs electrics: 220 volts, 3 ph, 60 cyc head raising mechanisms

                  $6,950
                  Bethlehem, PA, USA
                • 1960 Cleerman ADT Twin Spindle AD234

                  • Manufacturer: Cleerman

                    tefc spindle motor, standard plain or 24" x 60" hydraulic shuttle table roller with programmable automatic cycles, ettco multi-drill units on each spindle, 4 spindles per head, new a-b magnetics and plc installed...

                    No price
                    Washington, PA, USA
                  • Schiess WBF 19 Dual Spindle 48 272

                    • Manufacturer: Schiess
                    • Spindle Diameter: 7.50 in 190.00 mm

                    auxiliary spindle: 3 inch (75 mm), auxiliary spindle rpm: 100 - 600, axial displacement of faceplate: 4.625 inch (120 mm), spindle axis distance from upper side of bed: minimum 29.5 inch (750 mm) - maximum 128 in...

                    No price
                    Washington, PA, USA