Used Granulators & Pelletizers

Cumberland 3KN 1215 Granulator Plastic Shedder 12x15" Opening 15 Hp 230/460V

• used

• Manufacturer: Cumberland

Used, in Good Working Condition, Tested OK. This unit is wired for 480V. Blades look like they are in good shape. These are the triple blade setup. If this item ships as Flat Rate Freight please see details in Sh...

Allsteel 1217 Plastic Granulator Shredder Chipper 12 x 17" 20HP 230/460V 3Ph

• used

• Manufacturer: Allsteel

Used, in Good Working Condition, Tested. Triple blades. 17" Wide blades. 1/4" mesh holes. Comes with a 3/8" hole set. 4" dust collector outlet in the bottom drawer. Electric motor is 20 hp wired for 480V. Opening...

Wor-Tex JC-10L Plastic Granulator Shredder Chipper 8 x 21" 15HP 230/460V

• used

• Manufacturer: Wor-Tex

Used, in Good Working Condition, Tested. 21 blades. Offset stepped. 3" wide each. The bottom of the unit needs a hopper. 18x28x14" max. Motor is 15 hp wired for 480V. Max material size is 14" wide 5" thick for to...

Glatt Granulator TR16002

• refurbished

• Manufacturer: Glatt

Glatt, Model TR160/02, stainless steel wet or dry granulations screener. Equipped with a 17½" diameter x 9" deep hopper and 6" diameter discharge with 17" ground clearance. Powered by a 2.95 hp drive and mounted ...

Glatt Granulator TR16002

• refurbished

• Manufacturer: Glatt

Glatt, Model TR160/02, stainless steel wet or dry granulations screener. Equipped with a 17½" diameter x 9" deep hopper and 6" diameter discharge with 17" ground clearance. Powered by a 2.95 hp drive and mounted ...

Glatt Granulator TR16002

• refurbished

• Manufacturer: Glatt

Stainless steel wet or dry granulations screener to a selected particle size. Features a 4.5 gallon hopper, a 6" diameter discharge at 34"H. Quick Sieve can be used for the de-lumping or milling of raw materials...

75HP NELMOR GRANULATOR MDL G1436MB WITH FEED ROLLS

• used

• Manufacturer: Nelmor
• Model: G1436MB

106136 One (1) Used Nelmor G1436MB Granulator with Feed Rolls In-feed: 4" Diameter x 35.5" Wide Knurled Steel Feed Rolls / 30" Wide In-feed Trumpet w/Dancer Bar - 1 HP D/C Motor & 8" x 13" Side Parts Feed Cutting...

H.D "MPG" ELECTRIC 3PH COMMERCIAL PLASTIC GRANULATORS

• used

• Manufacturer: MPG SERVICE & SALES

H.D "MPG" ELECTRIC 3PH COMMERCIAL PLASTIC GRANULATORS MAKE- MPG SERVICE & SALES MODEL#- MP-1114N SN- M1176 ELECTRICAL INFORMATION 460/480 V, 10 HP, 3 PH,14 AMP, 60HZ, 1175 RPM HARD WIRE REQUIRED APPROXIMATELY DIM...

Pelletizer Head No Blades

• used

Pelletizer Head No Blades

1996 ACRISON 403-8000-1200-BDF2.5 #1129006

• used

• Manufacturer: Acrison

Conair JC-5 Wor-tex Granulator Grinder 5Hp 1/4" Holes 8x10" Infeed 240V 3Ph

• used

• Manufacturer: Conair
• Model: JC-5

Used, in Good Working Condition. Removed From a Working Environment. Blade have had heavy use. Motor is wired for 240V. Motor is 5 hp 230/460V. If this item ships as Flat Rate Freight please see details in Shippi...

MECHANIC SPECIAL CUMBERLAND GRINDER/GRANULATOR 5HP MODEL 8X12

• used

• Manufacturer: Cumberland
• Model: 8X12

CUMBERLAND GRINDER/GRANULATOR 5HP MODEL 8X12 ***Mechanic Special*** This product was acquired from a bank owned auction in unknown working condition and is sold *as is* no warranty. This product was acquired from...

NELMOR Grinder Granulator G810P1 Used

• used

• Manufacturer: Nelmor
• Model: G810P1

NELMOR Grinder Granulator G810P1 8" x 10" Throat Size 5 HP Open Rotor 2 Blade 1/4" Screen Hole Size 240 Volt 3 Phase Tested Good Buyers are welcome to inspect equipment prior to purchase. Expedited ship...

Conair JC-5 Wor-tex Granulator Grinder 5Hp 1/4" Holes 8x10" Infeed 240V 3Ph

• used

• Manufacturer: Conair
• Model: JC-5

Used, in Good Working Condition. Removed From a Working Environment. Blade have had heavy use. Motor is wired for 240V. Motor is 5 hp 230/460V. If this item ships as Flat Rate Freight please see details in Shippi...

Conair JC-5 Wor-tex Granulator Grinder 5Hp 1/4" Holes 8x10" Infeed 240V 3Ph

• used

• Manufacturer: Conair
• Model: JC-5

Used, in Good Working Condition. Removed From a Working Environment. Blade have had heavy use. Motor is wired for 240V. Motor is 5 hp 230/460V. If this item ships as Flat Rate Freight please see details in Shippi...