Used Processing in New Jersey, USA

GEA EcoCut 225

• Manufacturer: GEA

GEA EcoCut 225 Emulsifier with capacity for 14,000-20,000 lbs/hr of product, depending on product viscosity. S/N: E011100105025. Equipment meets American Meat Institute (AMI) hygienic standards. The EcoCut does N...

1968 Brighton FDWV-50510-BJD

• Manufacturer: Brighton

Brighton Vertical Dimple Jacketed Reactor Brighton, 1,000 Gallons Capacity, 182 PSI @ 350°F Jacket Pressure, 200/FV @ 350°F Internal Pressure, Top/Center-Mounted Pfaudler Agitator, 316-L Stainless Steel, Mounted ...

Centrifuge-Disc Bowl 2.2 kW (3 HP) - IPP# 94979

• Manufacturer: Westfalia

Designed for 5 gpm coolant flow rate, 7 gpm for oil. Batch system includes (1) 250 gal dirty coolant tank; (1) 250 gal clean coolant tank; (1) 250 gal dirty oil tank. Clean oil designed to discharge to barrels. S...

IPP# 601610, Methanol Plant-275 TPD (82,500 TPY) Petrochemical

Current Capacity: 82,500 TPY Product Quality: Methanol A Technology: Process uses natural gas as feedstock with added of carbon dioxide in the reforming furnace

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221211

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac Motor

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221216

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact, and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by a...

Classifier 762 mm (30 in) Stainless Steel 304 - IPP# 207942

• Manufacturer: Sweco

lined Turbo-Screen Classifier For scalping or dedusting on screens as fine as 20 microns Suction feed through 6" inlet Undersize particles are passed through the screen then are precipitated from the conveying ai...

Stainless Steel 316 Steris Finn-Aqua 3000-G Still - IPP# 230720

• Manufacturer: Finn

4700 lbs/hr Pure Steam Generator Falling film design to remove pyrogenic material Steam heated. Electricals rated 3.0 kW, 480 volt, 60 cyc, 5.2 amp with 0.5 kW 120 volt 4.2 amp, 60 cyc controls. All product surfa...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 203934

• Manufacturer: Heinkel

inverting filter centrifuge Rated 1150 RPM Solid Haynes Hastelloy C22 for all process parts 316SS for balance of exterior parts Clean in place nozzles for solids and filtrate housings Polished to 180 grit and ele...

Stainless Steel Austenitic Chema Balke Dürr GmbH Batch-Type Agitated Reactor - IPP# 235800

• Manufacturer: Dürr

1.4529 SS (AL-6XN super-Austenitic SS) fermenter/ reactor with internal cooling coil and sparge ring for gas addition Polished stainless steel interior motor : 3/50/380 volt Bergmann double mechanical seal on sha...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216002

• Manufacturer: Trane

CentraVac Low temperture, Series R chiller Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Co...

Stainless Steel 316 Centrifuge-Lab - IPP# 239309

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Major Items Plastic Stainless Steel 316 - IPP# 205767

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Stainless Steel 317 Andritz SZ400/2 Centrifuge-Pusher - IPP# 232767

• Manufacturer: Andritz

Duplex/317/316 stainless steel two stage pusher continuous centrifugeTwo stage pusher continuous centrifuge 5.5 ton/hour troughput of solids 10/130 degrees C cake thickness of outer basket 40mm (max) inner basket...

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246699

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.