Used Processing in New Jersey, USA

Stainless Steel 304 Batch-Type Agitated Reactor - IPP# 207282

• Manufacturer: Process Systems ltd

Jacketed Pressure/Vacuum Reactor with Mixer Jacket rated MAWP for 100 psi @ 338 degrees F., MDMT for -20 degrees F @ 100 psi Vessel has two zone half pipe coil jacket Mixer was a double-motion agitator with scrap...

1968 Brighton FDWV-50510-BJD

• Manufacturer: Brighton

Brighton Vertical Dimple Jacketed Reactor Brighton, 1,000 Gallons Capacity, 182 PSI @ 350°F Jacket Pressure, 200/FV @ 350°F Internal Pressure, Top/Center-Mounted Pfaudler Agitator, 316-L Stainless Steel, Mounted ...

RAYNERI Trimix TXR50

• Manufacturer: RAYNERI

Comprehensively tested, used Rayneri model Trimix TXR50 stainless steel process vessel. Manufacturer: Rayneri. Also includes: -The vessel is vacuum rated for deaeration of the product during the mixing cycle. -Th...

OLSA 266 LITRE

• Manufacturer: Olsa

Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels. Full hydraulic raise/...

2007 WINKWORTH PV63-25

• Manufacturer: WINKWORTH

Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mecha...

Batch-Type Agitated Reactor 34,050 L (9,000 gallons) Stainless Steel 316 - IPP# 246699

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Batch-Type Agitated Reactor 34,050 L (9,000 gallons) Stainless Steel 316 - IPP# 246701

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

1997 MIZUHO INDUSTRIAL PVTS-5UN

• Manufacturer: MIZUHO INDUSTRIAL

Used Mizuho Industrial Model PVTS-5UN vacuum jacketed triple-action high shear mixer. 6.5" diameter X 8" deep stainless steel mixing chamber. Manual hand lift of mixer head and manual tilt of chamber.

TALLERES MIRALLES MPV60

• Manufacturer: Talleres Miralles

Comprehensively tested, used Talleres Miralles type MPV60 stainless steel twin shaft planetary mixer. Manufacturer: Talleres Miralles. Also includes: -Hydraulic Powrpack for raise and lower. -A mobile stainless s...

OMAS T Mix 5

• Manufacturer: Omas

Comprehensively tested, used Omas T Mix 5 approximately 5 litre stainless steel jacketed emulsifier mixer. Manufacturer: Omas. Also includes: -Top mounted central homogenizer type mixer driven by elec. motor. -Ma...

ROSS LDM2

• Manufacturer: Ross
• Model: LDM2

Used Stainless Steel Ross Planetary Mixer Manufacturer: Ross Model: LDM2

GREAVES VLS10

• Manufacturer: GREAVES

Comprehensively tested, used Greaves model VLS 10 stainless steel mixer. Manufacturer: Greaves. Also includes: -Pneumatically operated raise and lower giving approximately 190cm total height. -Stainless steel lid...

Carbon Steel Kinney/Tuthill KDP-800 Pump-Vacuum - IPP# 221215

• Manufacturer: Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor`

Carbon Steel Kinney/Tuthill KDP-800 Pump-Vacuum - IPP# 221214

• Manufacturer: Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

IPP# 602135, Solid State Polymerization Plant Polymers - Fibres and Plastics

70 TPD PET - SSP Plant It is a facility that manufactures high-IV PET chips suitable for various bottle production by reacting low-IV PET chips produced in a melt polymerization process in a solid state to have h...