- Trusted Seller
Rotary Compressor Clark 2BF9 - IPP# 206302
used
- Manufacturer: Clark
Ammonia Compressor C/T 20571. Inlet Casing Design Pressure 2500 PSIG, Outlet Casing Design Pressure 2500 PSIG; Outlet casing Design Temperature 450 Degrees F 1sr Critical speed 5300 RPM, Maximum Operating Tempera...
Princeton Junction, NJ - Trusted Seller
Reciprocating Compressor - IPP# 91197
used
- Manufacturer: Clark
Cast iron cylinder for Clark nitrogen compressor 4" stroke, 12" bore. Max 800 psi.
Princeton Junction, NJ - Trusted Seller
62,576 m3/h (36,831 CFM) Carbon Steel Centrifugal Compressor - IPP# 216226
used
- Manufacturer: Clark
Centrifugal compressor C/T # 20967-A HP=14438 Ratio; 3.68. Down Nozzle, set up for a turbine drive.
Princeton Junction, NJ - Trusted Seller
7,727 m3/h (4,548 CFM) Centrifugal Compressor - IPP# 207980
used
- Manufacturer: Clark
with Eight impellers. Previously used to increase the pressure of methanol, but can be used for other service. The rated suction is 119.7 PSIA @ 100 degrees F The casing design pressure is 340 psig in both the in...
Princeton Junction, NJ - Trusted Seller
7,279 m3/h (4,284 CFM) Carbon Steel Centrifugal Compressor - IPP# 212815
used
- Manufacturer: Clark
4284 ACFM Rated for 9185 hp Pressure Suction 140 Nozzle orientation up. Rpm 10483 Driven by a steam turbine (IPP# 212817) and speed increaser (IPP # 212818). Molecular weight, 17.03 5 Stages, 10,438 rpm speed. 66...
Princeton Junction, NJ - Trusted Seller
2,666 m3/h (1,569 CFM) Carbon Steel Centrifugal Compressor - IPP# 212813
used
- Manufacturer: Clark
forged CS case with seven impellers Inlet pressure is 904.4 psia, inlet temperature is 100 degrees F Cooling water temperature is 85 degrees F and after intercooling is 100 degrees F The compressor rpm is 10,440,...
Princeton Junction, NJ - Trusted Seller
1,247 m3/h (734 CFM) Carbon Steel Centrifugal Compressor - IPP# 212812
used
- Manufacturer: Clark
2016 cfm, recycle stage forged CS case with 5 impellers Average compressibility factor 1.078 Inlet temperature 90 degrees F. Average compressibility factor 1.078. Discharge pressure at compressor flange 2529.9, d...
Princeton Junction, NJ - Trusted Seller
Princeton Junction, NJ - Trusted Seller
6,930 m3/h (4,079 CFM) Carbon Steel Centrifugal Compressor - IPP# 212809
used
- Manufacturer: Clark
4,079 acfm rotary air compressor Direct driven by a steam turbine (IPP# 212810) through a gear reducer (IPP# 212811) Pressure Suction 14.07 6400 rpm critical speed 12"" inlet X 10"" discharge Nozzle orientation i...
Princeton Junction, NJ - Trusted Seller
19,985 m3/h (11,763 CFM) Carbon Steel Centrifugal Compressor - IPP# 212816
used
- Manufacturer: Clark
11,763 ACFM with seven impellers inlet temperature is 24 degrees F. The average compressibility factor is 0.979. The nozzle orientation up The compressor rpm is 5,875 rpm, with a maximum speed of 6,220 rpm and a ...
Princeton Junction, NJ - Trusted Seller
42,440 m3/h (24,979 CFM) Carbon Steel Centrifugal Compressor - IPP# 212808
used
- Manufacturer: Clark
Compound centrifugal compressor with seven impellers and labyrinth seals Inlet pressure is 14.07 psia in the first section and 40.4 psia in the second section Gas handled: air, with an average compressibility fac...
Princeton Junction, NJ - Trusted Seller
CLARK VT
used
- Manufacturer: Clark
- Model: VT
Used Clark compressor cylinder. 6.25" bore X 8.00" stroke. Type VT, serial #491. From Clark MA-8.
Hainesport, NJ
Tip: Enter manufacturer, model or keyword