- Trusted Seller
1999 DAEWOO Lynx 200B-GL
- Manufacturer: Daewoo
- Model: Lynx 200B
- Spindle bore: 52 mm
Control: Fanuc 21i-T | Dimensions: 120"x77"x80" | Weight: 7600 | Equipped with: Fanuc 21i-T Control 8" 3-Jaw Kitagawa Chuck Tool Pre-setter Parts Catcher RS-232 Port Coolant Tank & Pump Chip Conveyor Gantry Load...
United States 
Daewoo Puma CNC Lathe, 200 LMSC, 20" x 19", Max Dia. 11.5", Live tooling, Sub Spindle
- Manufacturer: Daewoo
- Spindle bore: 75.95 mm
Swing: 20.5" | Max turing diameter: 11.8" | Distance between centers: 19.5" | Spindle speed: 4500 RPM | Spindle drive: 20 hp | Spindle bore: 2.99" | Chuck size: 8" 3 Jaw | Machine weight: 9500 lbs | Foot print: ...
Texas, USA
2002 DAEWOO PUMA 2000Y
- Manufacturer: Daewoo
- Model: Puma 2000Y
EQUIPPED WITH: Fanuc 18i-T CNC Control Live Tooling Y-Axis Parts Catcher Programmable Tailstock Chip Conveyor LNS Eco Load Bar Feed Kitagawa 8" 3-Jaw Chuck 8 Live Holders Spindle liners Many Collets Under Power!!...
Arizona, USA- Trusted Seller
2002 DAEWOO DHM 500
- Manufacturer: Daewoo
- Model: DHM 500
- Spindle taper: CAT 50
2002 Daewoo DHM-500 Horizontal Machining Center with Fanuc 16i-M Control, 6,000 RPM, CAT-50 Spindle, 1 Degree 4th Axis, 60 ATC.
Phoenix, AZ 
2004 DAEWOO DMV4020
- Manufacturer: Daewoo
- Model: DMV 4020
- Spindle taper: BT 40
Fanuc 21i MB Wired for Fourth X axis travel: 40" | Y axis travel: 20" | Z axis travel: 24.6" | Rapid rate x axis: 1,181 IPM | Rapid rate y axis: 1,181 IPM | Table size: 39.4" x 17.7" | Max table load: 1,760 LBS |...
2004 Daewoo DMV 4020
- Manufacturer: Daewoo
- Model: DMV 4020
- Spindle taper: BT 40
CNC Vertical Machining Center Used Daewoo DMV 4020 (2004) CNC Vertical Machining Center for Sale. This pre-owned Daewoo CNC vertical mill is located in The United States and available to be seen under power for ...
USA2002 Daewoo DMV 5020
- Manufacturer: Daewoo
- Model: DMV 5020
- Spindle taper: CAT 40
CNC Vertical Machining Center Used Daewoo DMV 5020 (2002) CNC Vertical Machining Center for Sale. This pre-owned Daewoo CNC vertical mill is located in The United States and available to be seen under power for ...
USA2005 Daewoo DMV 4020L
- Manufacturer: Daewoo
- Model: DMV 4020L
- Spindle taper: BT 40
CNC Vertical Machining Center Used Daewoo DMV 4020L (2005) CNC Vertical Machining Center for Sale. This pre-owned Daewoo CNC vertical mill is located in The United States and available to be seen under power for...
USA- Trusted Seller
Daewoo DMV-4020 CNC Vertical Machining Center, 2002
- Manufacturer: Daewoo
- Model: DMV 4020
- Spindle taper: BT 40
Up for sale: 2002 Daewoo DMV-4020 CNC Vertical Machining Center. Used, with 40"x20"x24.6" travels, 20 hp, 8,000 RPM spindle, CT40 taper, and 24 ATC capacity.
Los Angeles, CA - Trusted Seller
1996 DAEWOO PUMA 8S
- Manufacturer: Daewoo
- Model: Puma 8S
1996 Daewoo Puma 8S CNC Lathe with Fanuc OT Control, 8" Chuck, Tailstock, 12 Station Turret, and Parts Catcher
Phoenix, AZ - Trusted Seller
1997 DAEWOO PUMA 350B
- Manufacturer: Daewoo
- Model: Puma 350B
- Spindle bore: 132.08 mm
1997 Daewoo Puma 350B CNC Lathe with Fanuc 18-T Control, 21" Hydraulic Chuck, Tailstock, 10 Station Turret, 4.6" Bar Capacity, and Turbo Chip Conveyor.
Phoenix, AZ - Trusted Seller
1999 DAEWOO Lynx 200B-GL
- Manufacturer: Daewoo
- Model: Lynx 200B
- Spindle bore: 52 mm
1999 Daewoo Lynx 200 GL CNC Turning Center with Fanuc 21-T Control, 8" Chuck, Parts Catcher, and Gantry Loader
Phoenix, AZ 
2001 DAEWOO DMV4020
- Manufacturer: Daewoo
- Model: DMV 4020
- Spindle taper: BT 40
Control: Fanuc 21iMB X Axis Travel: 40.1" Y Axis Travel: 20.1" Z Axis Travel: 24.6" Table Loading Area: 19.7" x 47.2" Max. Table Load: 1,760 lbs. Table T-Slot Spacing: (4) 4.92" x .71" Spindle Nose to Table Top: ...
2006 Daewoo Puma 240C
- Manufacturer: Daewoo
- Model: Puma 240C
CNC Lathe Used Daewoo Puma 240C (2006) CNC Lathe for Sale. This pre-owned Daewoo CNC lathe is located in The United States and available to be seen under power for an inspection. If you have any questions regar...
USA2003 Daewoo Puma V550
- Manufacturer: Daewoo
- Model: Puma V550
CNC Vertical Turret Lathe Used Daewoo Puma V550 (2003) CNC Vertical Turret Lathe for Sale. This pre-owned Daewoo CNC vertical turret lathe is located in The United States and available to be seen under power for...
USA
Daewoo Mynx 530 Machining Center
- Manufacturer: Daewoo
- Model: Mynx 530
Good condition Daewoo Mynx 530 Machining Centers manufactured in 2001. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
