Used Processing in New Jersey, USA

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...

Reactor Body, Kettle Batch-Type Stainless Steel 316 - IPP# 210499

• Manufacturer: Hamilton Kettle

sanitary reactor body, Wall thickness: 0.25" thick side wall, 0.220" thick top head, 0.218" thick bottom head Sanitary construction, vessel and jacket are insulated and covered with a SS shroud. Previously used f...

Classifier 762 mm (30 in) Stainless Steel 304 - IPP# 207942

• Manufacturer: Sweco

lined Turbo-Screen Classifier For scalping or dedusting on screens as fine as 20 microns Suction feed through 6" inlet Undersize particles are passed through the screen then are precipitated from the conveying ai...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...

Still Stainless Steel 316 - IPP# 230720

• Manufacturer: Steris Finn-Aqua

4700 lbs/hr Pure Steam Generator Falling film design to remove pyrogenic material Steam heated. Electricals rated 3.0 kW, 480 volt, 60 cyc, 5.2 amp with 0.5 kW 120 volt 4.2 amp, 60 cyc controls. All product surfa...

Sterilizer - IPP# 207687

Designed for pass thru loading and unloading, with quick open doors front and back. Original Installation to a clean room 316 SS lined chamber Modified and re-rated in 1993 by Industrial Fabricating and Engineeri...

Tubular Reactor Stainless Steel 316 - IPP# 232538

• Manufacturer: Snowtech Hydro Cracker & Fisher Tropsch

Pilot plant, including an Agilent Tech Model 7890A-GC. Designed to operate at up to 725 psig and 572 degrees F in the auxiliary process vessels and 932 degrees F in the reactor tubing. The current set up includes...

Stainless Steel 316L Centrifuge-Lab - IPP# 239308

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Lab Centrifuge Stainless Steel 316L Centritec Cell 8 - IPP# 239307

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert The system offers these advantages Single use, rapid changeover dispo...

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel - IPP# 220241

• Manufacturer: Disco

manufacturers #881150-02-S-03-SK-02-0259 feed density 1110 kg/cm3 sediment density 1251 kg/cm3 control fluid density 1000 kg/cm3 process temperature 0-100 deg C 438mm diameter bowl Swep 316 s/steel (1.4401) plate...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 203934

• Manufacturer: Heinkel

inverting filter centrifuge Rated 1150 RPM Solid Haynes Hastelloy C22 for all process parts 316SS for balance of exterior parts Clean in place nozzles for solids and filtrate housings Polished to 180 grit and ele...

Stainless Steel Austenitic Chema Balke Dürr GmbH Batch-Type Agitated Reactor - IPP# 235800

• Manufacturer: Dürr

1.4529 SS (AL-6XN super-Austenitic SS) fermenter/ reactor with internal cooling coil and sparge ring for gas addition Polished stainless steel interior motor : 3/50/380 volt Bergmann double mechanical seal on sha...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216002

• Manufacturer: Trane

CentraVac Low temperture, Series R chiller Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Co...

Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic - IPP# 233810

• Manufacturer: Rieter

Type: Underwater strand pelletizing system Complete system includes the Rieter M-USG 900 V cutter. strand transfer equipment, pellet cooler and screener The cutter IPP Stock # 205766- Rieter (Maag) the vertical d...

Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic - IPP# 233813

• Manufacturer: Rieter

Underwater strand pelletizing system Cutter included: Rieter M-USG 900 V Strand transfer equipment included Pellet cooler included Screener included The cutter IPP Stock # 205764- Rieter (Maag), M-USG 900 V Under...