Building Filters
SCHRAMM T64 DRILL RIG #9879Tb
- Manufacturer: Schramm
250 psi air compressor, Detroit 8V71 deck engine, mounted on 1976 GMC truck, rod box, winch, 200’ drill pipe, sitting for a while Price: $40,000
1978 DRILTECH D40K DRILL RIG AND WATER TRUCK PACKAGE #5280RA
- Manufacturer: Driltech
Manufactured 1978, Cat 3406 deck engine, mounted on CCC with Cat 3208 engine, 750/300 Sullair compressor, 40000# pullback, 6+6 carousel, water injection, line oiler, 3 hydraulic leveling jacks, 300’ of 4 1/2” x 2...
SIMCO 2400 DRILL RIG #6813Td
- Manufacturer: Simco
Mounted on Bombardier carrier, Perkins diesel engine, PTO, 5 speed transmission, heated cab, 20’ mast, rod clamp/breakout, 8000 lb winch, 3000 lb winch, auto hammer, 24,000 lb pullback, 20,000 lb pull down, 4 spe...
SIMCO 2400 DRILL RIG #4313T
- Manufacturer: Simco
Mounted on 2009 Ford F550 2WD truck with 6.4 power stroke diesel engine, approx. 151,300 miles, hydraulic air compressor, sliding platform, gas deck engine, percussion hammer, good running condition but has a min...
CME 850 DRILL RIG #11920N
Manufactured 1997, Cummins deck engine, track mounted, in-out and side to side slide base, 23' quick disconnect mast, angle capability, 140# auto hammer, breakout wrench, no cathead, Moyno 3L6 pump, 3 hoists, wat...
- Trusted Seller
2005 ATLAS COPCO ROC D7-LM
- Manufacturer: Atlas-Copco
- Model: ROC D7 LM
- Horsepower: 225 hp
- Drilling depth: 28 m
3.5 – 4.5 Inch Class Long Mast 20′ FT Steel Cat Engine Unit is still in use. 2005 Atlas Copco ROC D7-11 LF These Photos were taken March 29th, 2016 when the unit had 5798 engine hours & 1494 percussion hours. The...
Louisville, KY NEW 400C CRAWLER MOUNTED OR TRUCK HYDRAULIC DRILL RIG #12929T
- Manufacturer: Cummins
New – never used, Cummins 6LTAA8.9 @ 360 HP, Sauer Danfoss Load Sensed Piston Pumps, Sauer Danfoss PVG Valves, 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque, Rotation Head slides horizontally for casing i...
Oceanside, NY- Trusted Seller
2012 ATLAS COPCO FLEXIROC D60
- Manufacturer: Atlas-Copco
- Model: FLEXIROC D60
- Horsepower: 475 hp
- Drilling depth: 55.5 m
4 – 7 Inch DTH Class Cat C13 Tier 3 Diesel Engine High Pressure 858 CFM @ 363 PSI Air Compressor Total Hours – 7164 Single Section Boom System Aluminum Profile Feed Beam Hydraulic Operated DHR6H56-3 Rotary Head C...
Louisville, KY - Trusted Seller
2001 INGERSOLL-RAND ECM680
- Manufacturer: Ingersoll Rand
- Model: ECM-680
- Horsepower: 260 hp
- Drilling depth: 30 m
HCR-150 DRIFTER CUMMINS 6CTA8.3 AUTO ROD CHANGER BOOM SWING HOSE REEL AUTO DRILLING SYSTEM REAR MIRROR
- Trusted Seller
2001 INGERSOLL-RAND CM682
- Manufacturer: Ingersoll Rand
- Model: CM-682
HCR-150 DRIFTER CUMMINS 6CTA8.3 AUTO ROD CHANGER BOOM SWING HOSE REEL AUTO DRILLING SYSTEM REAR MIRROR.
1946 BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #400T
- Manufacturer: Bucyrus-Erie
- Model: 22W
- Mast Height: 12.19 m
Built 1946, mounted on 1977 Ford F600, 16,700 actual miles, lots of repairs and upgrades, new fuel pump, new radiator, inside looks new, outside paint faded, good working condition, tools Price: $62,000 – New Mexico
- Trusted Seller
2021 Furukawa HCR1450-EDII
- Manufacturer: Furukawa
- Model: HCR1450EDII
- Horsepower: 260 hp
- Hours: 2,231 h
2021 Furukawa HCR1450-EDII. 2231 Hours with 1068 Drifter Hours. HD828S Drifter. Currently set up for T514 Drill Steel. Available for inspection in Louisville, Ky.
- Trusted Seller
2014 ATLAS COPCO FLEXIROC D60
- Manufacturer: Atlas-Copco
- Model: FLEXIROC D60
- Horsepower: 475 hp
- Drilling depth: 55.5 m
DTH Class Cat C15 Tier 4 Final Diesel Engine Total Engine Hours 3917 4” Drill Pipe w/ 6” DTH Hammer Set up to handle 4” Drill Pipe x 16.5’ Ft Length Rotary Head hours: 2700 Condition: Used. No major issues. 2014 ...
Louisville, KY - Trusted Seller
2000 REEDRILL 400C
- Manufacturer: Reedrill
3.5” – 4.5” Inch Class CAT Diesel Engine Cab & Rod Changer – Hydraulic Drill 4600 total hours New Hydraulic Rotation Pump
Louisville, KY - Trusted Seller
2011 FURUKAWA DCR20
- Manufacturer: Furukawa
- Model: DCR20
- Horsepower: 440 hp
- Machine weight: 20,100 kg
3.5 – 6.5 Inch Class CAT C-13 Tier III Engine 3 Drill Pipe Estimated 6000 Total Hours with less than 500 hours on out of Frame Rebuild by CAT with warranty Angle Indicator
Louisville, KY 
Ingersoll Rand ECM-570 Drilling Rig
- Manufacturer: Ingersoll Rand
- Model: ECM-570
Good condition Ingersoll Rand ECM-570 Drilling Rigs manufactured in 1997. Located in USA and other countries. Click request price for more information.
USA
