Processing » Elektror

Building Filters

21

Used Elektror Processing

Trusted Seller
Centrifugal fan
- Manufacturer: Elektror
Flow rate: 27 m³/h | Total pressure differential: 8500 Pa | Engine speed: 5600 rpm | Power: 3,0 kW | Current: 10,9 / 6,3 A | Voltage: 230 / 400 V | Frequency: 95 Hz
Freising, Germany
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Diam Unit is a bare shaft side channel blower. Unit never commissioned. As new
Sydney, Australia
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Dia Unit is a skid mounted side channel blower. Driven by approx. a 11 Kw, 415 V electric motor.
Sydney, Australia
ELEKTROR SD-42
- Manufacturer: Elektror
Side channel blower. 3 Phase 1.3kW 220/380V 2800RPM 220mbar 2.8m³/min 1 inch inlet and 2 inch outlet Runs Well
Melbourne, Australia
Elektror Karl W. Müller Side channel blower 443835 SD-4
- Manufacturer: Elektror
Power: 0.75 Kw / 50 Hz / 3.2 / 1.85 A. | Rpm: 2820 | Connections: 220/380 V
Ederveen, Netherlands
Side channel blower Elektror HDN 1|5 (high pressure g 1258085
- Manufacturer: Elektror
Machine infoSide channel blower (high pressure blower) Elektror model HDN 1|5 Used machine ATTENTION: - NOT suitable for chip extraction - only for conveying air at high pressure - e.g. for vacuum Air capacity 5m...
Kempten, Germany

12