Used in Hiroshima, Japan

Special machine MR-115
- Manufacturer: Specialized machine
0.4kw/4p/200V with dolly Power: 0.4kw/4p/200V | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
2008 Osaka Sanitary SPL65-37
- Manufacturer: Osaka sanitary
Discharge rate: 0.125m3/min Rotation speed: 2900rpm
Hiroshima, Japan
1998 Osaka Sanitary SP32-22
- Manufacturer: Osaka sanitary
Total head 30m Discharge rate 0.02 m3/min Power: 2.2KW | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: １
Hiroshima, Japan
［Sanitary pump, unused, no model
- Manufacturer: Iwai Machinery
Material: Wetted part SUS | Quantity saved: １
Hiroshima, Japan
2000 Special Machine Industry NR-120
- Manufacturer: Specialized Machinery Industry
Motor: 1.5kw Discharge rate: 33L / min 50Hz 39.6L / min 60Hz Maximum discharge pressure: 1MPa
Hiroshima, Japan
［Izumi Food] Sanitary pump
- Manufacturer: Izumi
Power: 0.75 kw (estimated) | Material: Main section SUS | Quantity saved: 3 units
Hiroshima, Japan
Iwai Machinery PG 2.5 - 50 - 5.5
- Manufacturer: Iwai Machinery
Capacity: [60Hz] 15m3/h, head 55M Power: 200V | Purchasing area: 60Hz | Material: SUS | Quantity saved: １
Hiroshima, Japan
Osaka sanitary SE 40 - 55
- Manufacturer: Osaka sanitary
Mechanical seal Ability unknown (No information on the nameplate · No nameplate)
Hiroshima, Japan
Iwai Machinery PG 2.5 - 50 - 5.5
- Manufacturer: Iwai Machinery
Capacity: [60Hz] 15m3/h, head 55M Power: 200V | Purchasing area: 60Hz | Material: SUS | Quantity saved: １
Hiroshima, Japan
Iwai Machinery PG 2.5 - 50 - 5 - 1 - 3 - 3 X
- Manufacturer: Iwai Machinery
Discharge rate: 15 m 3 / hr Head: 55 m Power: 5.5kw | Purchasing area: 60Hz | Material: SUS | Quantity saved: 3
Hiroshima, Japan
Osaka sanitary ALC-3L / 148
- Manufacturer: Osaka sanitary
SUS 11 kw suction / discharge: 100/70 A Discharge amount 100 L / min Lift 30 m
Hiroshima, Japan
A spiral pump
Confirmation required. Note: No inventory number. (1) Place to put.
Hiroshima, Japan
EBARA 40×32FS2G.62.2
- Manufacturer: Ebara
Liquid flow rate: 90L/min to 275L/min Head: 39M (at 90L) - 23.5M (at 275L)
Hiroshima, Japan
Shinryo Manufacturing JU-2
- Manufacturer: Shinryo Manufacturing
Caliber: 40 × 25 Discharge rate: 4t / h Total head: 80m Rotation speed: 3600rpm
Hiroshima, Japan
Nishigaki UFS
- Manufacturer: Nishigaki
Flow rate: 0.03 m 3 / min Head: 30 m Aperture: 25 mm
Hiroshima, Japan