Used Evaporators

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 211715

• Manufacturer: Buss-SMS-Canzler GmbH

wiped thin film evaporator system Rotafilm straight side made up of (2) 1354mm long bolted sections, c/steel jackets on straight side and bottom cone, rotor direct driven by 3.6 kw, 3/50/380 volt, 1450 rpm gear m...

Wiped/Thin Film Evaporator Stainless Steel 304 - IPP# 704959

• Manufacturer: Balfour

wiped film lab size evaporator system. jacket 13.8 bar @ 200 degrees C. Consisting of (1) 2.5 square feet 304 stainless steel vertical jacketed wiped/thin film evaporator. with 304 stainless steel jacket. 4-blade...

Evaporator, Wiped Film, 30 SF, Rodney Hunt, S/st, #D739115

• Manufacturer: Rodney Hunt

Turba Film Evaporator, Rodney Hunt - Provides 30 sq. ft. of surface area and operates at up to 35 PSI and 300°F. Features a jacketed 60" long section but is less the drive.

Stainless Steel 316 Rising/Falling Film Evaporator - IPP# 220739

• Manufacturer: Buflovak/Blaw Knox

tubular evaporation system manufactured by Buflovak-Blaw-Knox. Includes 5 main pieces and support equipment such as pumps and small plate heat exchanger. Main pieces are as follows:(D) 1st effect steam chest (hea...

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 70252

• Manufacturer: Luwa

3 sections jacket rated by 10bar @ 200 degrees C ( total volume 150liter).

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 206245

• Manufacturer: Buss-SMS-Canzler GmbH

4' of shell is 316SS lined and the rest of the shell Hastelloy C lined Hastelloy C shell, CS Jacket. Dual rated jacket 200 PSIG @ 400 degrees F or 100 PSIG @ 650 degrees F. With 20 HP, 900 RPM, 3/60/230/460 Volt ...

Stainless Steel 316 Wiped/Thin Film Evaporator - IPP# 232537

(Two SPDU's) product contact, complete Short path distillation plant. This unit was previously used to process 300 lbs/day of product. The system consists of two, 0.1 m2 short path distillation units, three cold ...

Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220585

• Manufacturer: Pitton-Gessner/Germany

1.4571/H2 falling film rated -1/3 @ 200 ° C bar, 640 l tubes, -1/9bar@ 250 ° C, 610 l shell, dia 600 mm,2 stainless steel heads

Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220581

• Manufacturer: Kleiser Gmbh

both sides , 4.685 l internal, 1.100 l jacket total height 8.550 mm

Stainless Steel 316 Wiped/Thin Film Evaporator - IPP# 205459

• Manufacturer: Pope Scientific

Wiped-Film Molecular (Short-Path) Still 2 to 50 liters/hour. Electrically heated with slotted glass filled Teflon wipers on rotor. Mechanical seal on shaft. With high vacuum pump.

Stainless Steel 316 Hitachi Wiped/Thin Film Evaporator - IPP# 74896

• Manufacturer: Hitachi

jkt rated 125 psi @ 350 deg F 2-zone CS jkt. 10' long evaporation section. 8-blade rotor, mech seal on shaft. Belt driven by 30 HP, 3/60/460 volt, 890 rpm TEFC motor.

Evaporator Rising/Falling Film Two Effect Stainless Steel 304 - IPP# 216076

double effect evaporation system. See video of system operating at Capacity based on a brine stream at 24% to 50% strength. Feedstock of 32,000 lbs/hr(normal operating) or up to 50,000 lbs./hr. brine at ~ 20-25% ...

Hastelloy - C22 Clad Wiped/Thin Film Evaporator - IPP# 220954

• Manufacturer: SMS Buss

with 316 SS rotor, Jacket rated for 218 psi at 482 degrees F. Heating surface area 150.7 Sq. Ft., Serial numbers: Lower Body Serial Number 1400/56, National Board Number 717; Interm body Serial Number 1400/56, Na...

Zymark TurboVap LV Evaporator

• Manufacturer: Zymark

The Zymark TurboVap LV Concentration Evaporator, P/N 43750, is a workstation that provides simultaneous evaporation of up to (50) 15mL centrifuge tubes, offering many interchangeable tube racks which gives you th...