Processing » Extruders

Search By Manufacturer

Search By Country

Building Filters

9964

Used Extruders

  • NRM 4.5″ EXTRUDER BARREL 2025

    NRM 4.5″ EXTRUDER BARREL 2025

    • Manufacturer: NRM

    NRM 4-1/2″ extruder barrel, 24:1 L/D.

    Elk Grove Village, IL
  • 6″ WELEX EXTRUDER SCREW 12350

    6″ WELEX EXTRUDER SCREW 12350

    • Manufacturer: Welex

    6″ Welex extruder screw, S/N 144812, 32:1 L/D, 2 stage 216″ overall length. 9″ long x 1.5″ wide keyway.

    Elk Grove Village, IL
  • 3.5″ TWO STAGE EXTRUDER SCREW

    3.5″ TWO STAGE EXTRUDER SCREW 12027

      3.5″ chrome plated two stage extruder screw with two rows of mixing pins. Unknown manufacturer.

      Elk Grove Village, IL
    • WELEX 4.5" EXTRUDER SCREW 12343

      WELEX 4.5" EXTRUDER SCREW 12343

      • Manufacturer: Welex

      Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 1803592, 36:1 L/D.

      Elk Grove Village, IL
    • WELEX 4.5″ EXTRUDER SCREW 12730

      WELEX 4.5″ EXTRUDER SCREW 12730

        Welex 4.5″ extruder screw, no S/N, single stage, double spiral, chrome plated, 24:1 L/D. 150″ long.

        Elk Grove Village, IL
      • WELEX TWO STAGE 4.5″ EXTRUDER

        WELEX TWO STAGE 4.5″ EXTRUDER 12344

        • Manufacturer: Welex

        Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 180359.

        Elk Grove Village, IL
      • 4.5″ TWO STAGE EXTRUDER SCREW

        4.5″ TWO STAGE EXTRUDER SCREW 12023

          Two stage 4.5″ extruder screw with chrome plated mixing pins at the end of first stage. Approximately 28:1 L/D, single key shaft.

          Elk Grove Village, IL
        • Trusted Seller
          16" Wire Cut Extruder

          16" Wire Cut Extruder

            16" Wire Cut Extruder - (6) Piston extruder - Hopper with roller to force product into pistons - (2) 6-outlet dies: 1-1/8” and 1-5/8” diameter dies - Wire-cut arm - Cantilevers over the front end of a conveyor - ...

            New York, USA
          • BRABENDER 3/4″ LAB EXTRUDER 18623

            BRABENDER 3/4″ LAB EXTRUDER 18623

            • Manufacturer: Brabender

            Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...

            Elk Grove Village, IL
          • CINCINNATI EXTRUSION 45MM EXTRUDER 18639

            CINCINNATI EXTRUSION 45MM EXTRUDER 18639

            • Manufacturer: Cincinnati

            Used Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. S/N U2203. 28:1 L/D five (5) zone electrically heated, air cooled, and non-vented barrel at a 42″ centerline height. Hersteller Wat...

            Elk Grove Village, IL
          • EGAN 3.5″ EXTRUDER 10949

            EGAN 3.5″ EXTRUDER 10949

            • Manufacturer: Egan

            Egan 3.5″ extruder, S/N JO0787808. 100HP 500-Volt DC motor into a belt driven 11.48:1 gearbox 30:1 L/D electrically heated water cooled vented and plugged barrel on a 65″ centerline. Gearbox is rated for 265HP ma...

            Elk Grove Village, IL
          • DELTAPLAST 5 HP PEDESTAL EXTRUDER

            DELTAPLAST 5 HP PEDESTAL EXTRUDER 18675

              One (1) used 30mm Deltaplast model DVH 30.125:24 pedestal extruder. S/N WO281:1.91. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, and non-vented barrel. Radicon (David Brown)...

              Elk Grove Village, IL
            • WAYNE MFG 3/4″ EXTRUDER 17885

              WAYNE MFG 3/4″ EXTRUDER 17885

              • Manufacturer: Wayne

              One used 3/4″ 20:1 L/D Wayne laboratory extruder having a two (2) zone electrically heated, air cooled barrel. Gearbox is belt driven by a 2 HP DC Motor with controls. Unitized temperature control panel with thre...

              Elk Grove Village, IL
            • Trusted Seller
              23500 lbs/hr berstorff single screw

              23500 lbs/hr berstorff single screw extruder

              • Manufacturer: Berstorff

              RESIGUES EXTRUDER, 12/1 TOTAL FLIGHT LENGTH. 23,500 LBS/HR. CARBON STEEL 1000 PSIG DESIGN PRESSURE @ 698 DEG. F. DESIGN TEMPERATURE. 7'0" LONG X 6" WIDE X 7'0" HIGH. MATERIAL BEING EXTRUDED-MOLTEN POILYMER CONTAI...

              Red Bank, NJ
            • DAVIS STANDARD SINGLE STAGE EXTRUDER

              DAVIS STANDARD SINGLE STAGE EXTRUDER 12020

              • Manufacturer: Davis-Standard

              4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.

              Elk Grove Village, IL
            • no-image_en.png

              Jwell PC/PMMA Extruder

              • Manufacturer: Jwell
              • Model: PC/PMMA

              Good condition Jwell PC/PMMA Extruders. Located in China and other countries. Click request price for more information.

              China
            1516171819

            Overview

            Extruders are machines used in the manufacturing process to shape materials by forcing them through a die. Commonly used in plastic and metal industries, extruders are essential for creating products like pipes, sheets, and profiles. Their versatility allows them to handle various materials, including polymers, rubber, and even food products.

            FAQ

            What should I consider when buying a used extruder?

            Evaluate the extruder's condition, age, and previous usage. Check for signs of wear, especially on the screw and barrel, and ensure the machine has been well-maintained.

            How do I ensure the extruder is shipped safely to my location?

            Hire a logistics company experienced in transporting heavy machinery. Make sure the extruder is properly secured, and all parts are protected from damage during transit.

            What is the maintenance schedule for an extruder?

            Regular maintenance includes inspecting the screw and barrel for wear, checking and replacing filters, and ensuring the cooling and heating systems are functioning properly. Follow the manufacturer’s guidelines for specific maintenance intervals.