Processing » Extruders

Search By Manufacturer

Search By Country

Building Filters

9956

Used Extruders

  • DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER

    DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19060

    • Manufacturer: Davis-Standard

    One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N P2055. Shop Order Number 51763. Unit is mounted on a tripod with c...

    Elk Grove Village, IL
  • DAVIS STANDARD 1.25″ PEDESTAL EXTRUDER

    DAVIS STANDARD 1.25″ PEDESTAL EXTRUDER 19062

    • Manufacturer: Davis-Standard

    One (1) used 1.25” 24:1 L/D Davis Standard model DS125 1.25” pedestal extruder having a three (3) zone electrically heated and air-cooled barrel. S/N S1962. Shop Order Number 55728. Unit is mounted on a tripod wi...

    Elk Grove Village, IL
  • BATTENFELD CM55 TWIN SCREW EXTRUDER

    BATTENFELD CM55 TWIN SCREW EXTRUDER 18510

    • Manufacturer: Battenfeld

    Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...

    Elk Grove Village, IL
  • LEISTRITZ 27MM TWIN SCREW EXTRUDER

    LEISTRITZ 27MM TWIN SCREW EXTRUDER 18970

    • Manufacturer: Leistritz

    Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05″ (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8 barrel housing section electrically heated, water cooled. (1) Degassing port. Maximum scre...

    Elk Grove Village, IL
  • CINCINNATI 112mm TWIN SCREW EXTRUDER

    CINCINNATI 112mm TWIN SCREW EXTRUDER 18512

    • Manufacturer: Cincinnati

    Used Cincinnati model Argos 112P-65-20-1150-UL 112mm parallel counter rotating twin screw plastic extruder. S/N 2041843/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ratio of 27:1. Barre...

    Elk Grove Village, IL
  • Trusted Seller
    Betol 4024 Extruder - IPP#

    Betol 4024 Extruder - IPP# 104127

    • Manufacturer: Betol

    extrusion/film line (4) 12 KW for barrel w/screw speed indicator and ammeter Electrical supply 3 phase, 50 cycle, 380/440 volt Screw and barrel made of high grade corrosion resistant steel alloy (1) Betol Mdl 025...

    Princeton Junction, NJ
  • Trusted Seller
    HPM 3.5" Extruder 150 HP

    HPM 3.5" Extruder 150 HP 30:1 L/D Strand Die

    • Manufacturer: HPM

    “Used In working Condition” HPM 3.5" Single Screw Extruder 30:1 L/D Gearbox Ratio 13.881:1 150 HP AC Motor Allen Bradley Drive Control Cabinet Mounted Directly to Machine 20 Hole Strand die Included Screw and bar...

    $38,500 USD

    Get financing

    Est. $725/mo

    Henderson, KY
  • DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER

    DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19063

    • Manufacturer: Davis-Standard

    One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N 2058. Shop Order Number 51306. Unit is mounted on a tripod with ca...

    Elk Grove Village, IL
  • DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER

    DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19061

    • Manufacturer: Davis-Standard

    One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having four (4) zone electrically heated and air-cooled barrel. S/N S1966. Shop Order Number 55728. Unit is mounted on a tripod with cas...

    Elk Grove Village, IL
  • DAVIS STANDARD 3.5″ EXTRUDER W/DUAL

    DAVIS STANDARD 3.5″ EXTRUDER W/DUAL 17744

    • Manufacturer: Davis-Standard

    Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/...

    Elk Grove Village, IL
  • BRABENDER 35mm TWIN SCREW EXTRUDER

    BRABENDER 35mm TWIN SCREW EXTRUDER 16813

    • Manufacturer: Brabender

    One (1) used Brabender Prep Center having a model TSE35/17D-A conical twin screw extrusion head. .Two conical inter meshing screws with a 35mm diameter at the barrel discharge end and a 17:1 L/D ratio. S/N 187502...

    Elk Grove Village, IL
  • Bonnot Co. 12" Extruder –

    Bonnot Co. 12" Extruder – 40 HP Jacketed Grooved Barrel Industrial Screw Extruder

    • Manufacturer: Bonnot

    53993001 Used The Bonnot Co. 12" Extruder. 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 1775 rpm motor. Infeed 18" x 18". Centerline height ap...

    Belvidere, IL
  • DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER

    DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19064

    • Manufacturer: Davis-Standard

    One (1) used 1.5” 24:1 L/D Davis Standard model DS 15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N R0385. Shop Order Number 52609. Unit is mounted on a tripod with ...

    Elk Grove Village, IL
  • Trusted Seller
    Used Processing Technologies International LLC

    Used Processing Technologies International LLC Model G5000 Trident Series Single Screw extruder

    • Manufacturer: International

    Used Processing Technologies International LLC Model G5000 L/D ratio 32:1 Trident Series Single Screw extruder. S/N 16709-4484. Gear Drive Info: PTI Model ZPE2-300- B B7, S/N 15253, Ratio 12.66:1, Driver:1800, Dr...

    Salisbury, NC
  • Trusted Seller
    TROMP 3 ROLL 1000 EXTRUDER

    TROMP 3 ROLL 1000 EXTRUDER

    • Manufacturer: TROMP

    TROMP EXTRUDER MODEL: 1000 ORDER #: 9534 3 ROLL EXTRUDER 1 METER WIDE Can be used over a Tunnel Oven Band or has a Tray Loading Conveyor if using a Rotary Oven & Trays Last Doing Cheese Straws 3 Dies Inclu...

    Columbia, TN
  • no-image_en.png

    Jwell PVC Extruder

    • Manufacturer: Jwell
    • Model: PVC

    Good condition Jwell PVC Extruders manufactured in 2000. Located in China and other countries. Click request price for more information.

    China
1617181920

Overview

Extruders are machines used in the manufacturing process to shape materials by forcing them through a die. Commonly used in plastic and metal industries, extruders are essential for creating products like pipes, sheets, and profiles. Their versatility allows them to handle various materials, including polymers, rubber, and even food products.

FAQ

What should I consider when buying a used extruder?

Evaluate the extruder's condition, age, and previous usage. Check for signs of wear, especially on the screw and barrel, and ensure the machine has been well-maintained.

How do I ensure the extruder is shipped safely to my location?

Hire a logistics company experienced in transporting heavy machinery. Make sure the extruder is properly secured, and all parts are protected from damage during transit.

What is the maintenance schedule for an extruder?

Regular maintenance includes inspecting the screw and barrel for wear, checking and replacing filters, and ensuring the cooling and heating systems are functioning properly. Follow the manufacturer’s guidelines for specific maintenance intervals.