- Trusted Seller
SUNSTRAND LARGE CENTERING BED
- Manufacturer: Sundstrand
SUNSTRAND HEAVY CAST BED AND CENTER RESTS 48" CENTER TO CENTER 6" CENTER HEIGHT WITH 2" RISER X 2 = 16" SWING ON ROLLING CART 28" TOP OF CART 43" TO CENTER
Cleveland, OH - Trusted Seller
12" x 30" MONARCH "EE" PRECISION TOOLROOM LATHE w/ELECTRIC LEADSCREW REVERSE - COLLET CHUCK - ALORIS TOOL POST
- Manufacturer: Monarch
- Model: EE
12.5" x 20" MONARCH "10EE" PRECISION TOOLROOM LATHE Imperial Metric Serial No 49601, Model 10EE EQUIPPED WITH: Electric Leadscrew Reverse Collet Chuck - Some Collets Aloris Tool Post - (5) Tool Holders Flame Hard...
15 Inch Clausing Colchester Lathe Apron For 15 Inch Gap Bed Lathe
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester 15 Lathe Apron assembly this one is for a gap bed Lathe. The bronze gear does not look good the pinion moves in and out and the half nuts are gone. This is for a 15 inch Clausing Colchester, ...
$1,365 USDOregon, OHMonarch 10EE Lathe Steady Rest.with Rollers. Measurements Below
- Manufacturer: Monarch
- Model: 10EE
The Monarch 10EE Lathe Steady Rest with Rollers is designed for the Monarch Specialties model 10EE lathe. It features rollers for stability and support during metalworking operations. Specific measurements are pr...
$650 USDOregon, OHCLAUSING Colchester 15 inch METAL LATHE Quick Change Gearbox
- Manufacturer: Clausing/Colchester
- Model: 15"
CLAUSING Colchester 15 inch METAL LATHE Quick Change Gearbox Well, if you have a Clausing 15 that has a gear out in your quick change gear box this lathe just came in that has two bad gears and a bad shaft in the...
$1,750 USDOregon, OHCLAUSING Colchester 15 inch METAL LATHE Cast Iron Bed or Legs
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Legs Both Headstock End and Tailstock End Well, if you have a Clausing 15 with a broken leg or end bracket we have a nice set here. This had a worn gearbox and was taken for a parts machine. We do have o...
$950 USDOregon, OHCLAUSING Colchester 15 INCH Lathe Chuck Buck Chuck
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester Lathe Buck Chuck that is from a 15 inch clausing colchester lathe. Nice shape. Thank you for your Business!!' Shipping will be 95.00!!
$765 USDOregon, OH15 Inch Clausing Colchester Lathe Crosslide Table
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester crossfeed table, the crosslide is in nice shape, basically with a little cleanup your in business again. This is for a 15 inch Clausing Colchester, that is the square head. A & L Industries ...
$365 USDOregon, OH15 Inch Clausing Colchester Lathe Compound Slide
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester Compound Rest. This is for a 15 inch Clausing Colchester, that is the square head. The pictures did not turn out well but we will get new ones. A & L Industries or Tooltimes2 has been on eBay...
$550 USDOregon, OH15 Inch Clausing Colchester Lathe Compound Slide
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester Compound Rest. This is for a 15 inch Clausing Colchester, that is the square head. The pictures did not turn out well but we will get new ones. A & L Industries or Tooltimes2 has been on eBay...
$550 USDOregon, OHClausing Colchester 15” Lathe Carriage Stop
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester 15” Lathe Carriage Stop The Clausing Colchester 15" Lathe Carriage Stop is a manual control device designed for metal lathes. This stop is specifically made for a 15-inch chuck size and has a...
$400 USDOregon, OH15 Inch Clausing Colchester Lathe Threading Dial Or Thread Dial.
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester thread dial. This is for a 15 inch Clausing Colchester, that is the square head. A & L Industries or Tooltimes2 has been on eBay for 23 plus years. We can help you with parts or whole machin...
$350 USDOregon, OH15 Inch Clausing Colchester Lathe Crossslide Screw And Nut.
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester cross scre and nuts. This is for a 15 inch Clausing Colchester, that is the square head. A & L Industries or Tooltimes2 has been on eBay for 23 plus years. We can help you with parts or whole...
$550 USDOregon, OH15 Inch Clausing Colchester Lathe Crossfeed Handle.. Gear Not Pretty.
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester crossfeed handle, the gear on the end is rough, but better than nothing. This is for a 15 inch Clausing Colchester, that is the square head. A & L Industries or Tooltimes2 has been on eBay f...
$450 USDOregon, OH15 Inch Clausing Colchester Lathe Crossfeed Handle + Scew + Nut + Bearings
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester crossfeed handle. The gear is in nice shape as well as the threads and handle .Basically, with a little cleanup you're in business again. This is for a 15 inch Clausing Colchester, that is t...
$850 USDOregon, OH
Monarch 16W Centre Lathe
- Manufacturer: Monarch
- Model: 16W
Good condition Monarch 16W Centre Lathes. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
