Used Drilling Rigs

1972 GARDNER DENVER 1000 DRILL RIG #9790Ta

• Manufacturer: Gardner Denver

Manufactured 1972, 550/150 air compressor, 4 x 3 Mission centrifugal mud pump, mounted on tandem axle Ford truck, 700’ of 3” Bottleneck x 20’ (2-3/8 IF) drill pipe, 6” collar, (2) 7-7/8” tricone bits, starter sub...

2015 SHOP BUILT TRACK MOUNTED AUGER/MUD ROTARY DRILL RIG #619Tc

Manufactured 2015, Kubota engine with 210 hours, track drill, no hammer, can auger or mud rotary with external pump or there is a place for pump to be installed, like new Price: $52,500

SANDERSON CYCLONE 40 DRILL RIG #1895Ta

• Manufacturer: Sanderson

Ford Industrial gas deck engine, 2-line machine, mounted on late 1970’s Ford single axle dually trucks with gas engine, 2-wheel drive, 2 rear screw jacks, tooled for 6” and 8”, has been sitting and needs TLC

1978 CHICAGO PNEUMATIC 700 DRILL RIG #14193T

• Manufacturer: Chicago Pneumatic

Manufactured 1978, 1250/350 Sullair compressor, 50,000 lb pullback, Cat 3406 deck engine, mounted on 1978 Ford 8000 truck with Cat V636 engine, 20,000’ of drilling on recently replaced pulldown chains, steel and/...

2003 GUS PECH GP1300 BRAT SERIES AUGER DRILL RIG #5760T

Manufactured 2003, one owner rig, 13,000 ft/lb torque, 18.400 lbs pulldown, 24,500 lbs pullback, mounted on 2003 Sterling 6 x 4 truck with Cat engine, PTO, rig has 18,200 hours, 5300 hours on new engine (engine r...

SHOP BUILT MUD ROTARY DRILLING RIG #7785T

• Manufacturer: Shopbuilt

Built approx 2007, 150’ – 200’ depth capacity, rig has heavy duty railroad winch cable for up and down drilling operations or for pulling pumps, 3” centrifugal mud pump, IR 40 cfm developmental air compressor, pu...

1997 CME LC60 DRILL RIG #10232T

Manufactured 1997, fully refurbished, ready to drill, , brand new rotary head 80k, almost 100% hydraulic hoses has been changed, new winch motor, one new track, new turbo and lots of new pieces, new radio control...

1969 FAILING 1500 DRILL RIG #9268Tb

• Model: 1500
• Transmission type: Mechanical
• Mast Height: 0.94 m

Manufactured 1969, Reworked in 1985, mounted on 1989 International tandem truck with DT466 diesel engine, friction clutches, 40’ mast, double drum, 5 x 6 mud pump, 300’ drill rod Price: $64,500

1980 FAILING CF15 DRILL RIG #3525Ta

• Manufacturer: Failing
• Model: CF15
• Horsepower: 170 hp
• Drilling depth: 450 m

Manufactured 1980, 5-1/2 x 8” Gardner Denver duplex pump, 23’ kelly, chain pulldown, air clutches, breakout wrench, 5-5/8” retractable rotary table, derrick 34’ from table to crown, mounted on 2005 Kenworth T300,...

WALKER NEER 250-40 DRILL RIG PACKAGE #1042Ta

• Manufacturer: Walker

Top head Drive drill rig, Cat 3406 (500 hp), Alliston 750 transmission, capable of running casing up to 43’, pipe handling boom, hydraulic pipe tongs, pulldown equipped (pulldown chains have been removed), rated ...

2014 DAVEY KENT DK525 LIMITED ACCESS MICROPILE DRILL RIG #926Tb

• Manufacturer: Kent
• Model: DK525

Manufactured 2014, drills up to 11-7/8” max diameter casing casing, solid 17-18’ mast and sectional 14-15’ mast, 3-speed electric over hydraulic shifting rotator, 4 mast lengths, chain, rotator and 3 hydraulic dr...

1968 GARDNER DENVER 500 DRILL RIG #10015Ta

• Manufacturer: Gardner Denver

Manufactured 1968, (2) 5 x 6 mud pump, 600 cfm air compressor, 7-1/2” retractable table (rebuilt), 24’ fluted kelly, mounted on 1995 Ford L9000 truck with M11 Cummins engine, 10 speed transmission, PTO, 4 hyd lev...

1981 MAYHEW 1000 DRILL RIG #4022T

Manufactured 1981, Leroi SDS 75S1 air compressor, mounted on Paystar 5000 truck, pipe, tools, last used 2021 Price: $47,500 MAYHEW 1000

BAYSHORE LODRILL LM60 DRILL RIG #3359Ta

• Manufacturer: Bay Shore

Mounted on 1995 Caterpillar 315L, 60’ drill depth, 6 cylinder diesel engine Price: $165,000

Atlas-Copco SMARTROC T45-10 Drilling Rig

• Manufacturer: Atlas-Copco
• Model: SMARTROC T45-10

Good condition Atlas-Copco SMARTROC T45-10 Drilling Rigs manufactured in 2017. Located in USA and other countries. Click request price for more information.