Used Drilling Rigs

1986 INGERSOLL RAND TH60 DRILL RIG #5335T

• Manufacturer: Ingersoll Rand
• Model: TH-60

Manufactured 1986, 750/350 air compressor, rebuilt gear box, mounted on 1986 GMC General, Detroit 8V92 engine, 13 speed Eaton transmission, 400’ of 3-1/2” drill pipe, tooled. Includes a 5 x 6 Worthington mud pump...

1983 SPEEDSTAR SS1000 DRILL RIG #3669T

Manufactured 1983, Gardner Denver 5 x 6 mud pump, retractable table, mounted on International 4900 tandem axle truck with 251,000 miles, 4 jacks Price: $70,000 NATIONAL DRAWWORKS SINGLE DRUM ROTARY DRILL RIG

INGERSOLL RAND RO-300 DRILL RIGS #1555Ta

• Manufacturer: Ingersoll Rand
• Model: RO-300

Detroit V8 engine, 11 speed transmission, 5 x 10 Gaso hydraulic mud pump, 42’ mast, 8-1/2” retractable table, 4-1/2” x 25’ fluted round kelly, hydraulic drive winch, mounted on 1980 International, 4 hyd jacks Pri...

1964 FAILING CFD2 DRILL RIG #8107T

• Model: CFD2

Built 1964, 4-1/2 x 5 Failing mud pump, Grimmer Schmidt 125cfm developmental air compressor, 5-1/4” stationary table, 2-3/8” kelly, 10' stroke, mounted on 1984 International truck with DT466 engine, PTO), 4 hydra...

SHOP BUILT MUD ROTARY DRILLING RIG #7785T

• Manufacturer: Shopbuilt

Built approx 2007, 150’ – 200’ depth capacity, rig has heavy duty railroad winch cable for up and down drilling operations or for pulling pumps, 3” centrifugal mud pump, IR 40 cfm developmental air compressor, pu...

1997 CME LC60 DRILL RIG #10232T

Manufactured 1997, fully refurbished, ready to drill, , brand new rotary head 80k, almost 100% hydraulic hoses has been changed, new winch motor, one new track, new turbo and lots of new pieces, new radio control...

2015 TEXOMA 800-95 DRILL RIG #921T

• Manufacturer: Texoma
• Model: 800
• Horsepower: 140 hp
• Transmission type: PowerShift

Manufactured 2015, mounted on 2016 Freightliner tri-drive, 16,020# front axle, 57,160# rear axle, 73,180 GVW Price: $450,000 TEXOMA 800 DRILL RIG (3961Tc) 85’ depth, manufactured 1998, Cummins engine, 4” dry trip...

1994 TEXOMA 330-12 DRILL RIG #3961Ta

• Manufacturer: Texoma
• Model: 330
• Drilling depth: 7.62 m
• Drill Pipe Diameter: 76.2 mm

Manufactured 1994, 12’ depth, Detroit engine, (1) wet bar kelly, 3” square sub, ring and pinion rotary, 3” kelly bar, 5500 lb winch, hydraulic pole grabber that extends 6’, good condition Price: $65,000

1999 INGERSOLL RAND T3 DRILL RIG #11116Tb

• Manufacturer: Ingersoll Rand

Manufactured 1999, 900/350 Doosan air compressor (new 2022), Cat 3406 deck engine (rebuilt May 2022), approx 950 hours on compressor and engine), rotation head completely rebuilt 2024 as well as most hydraulic pu...

WALKER NEER 250-40 DRILL RIG PACKAGE #1042Ta

• Manufacturer: Walker

Top head Drive drill rig, Cat 3406 (500 hp), Alliston 750 transmission, capable of running casing up to 43’, pipe handling boom, hydraulic pipe tongs, pulldown equipped (pulldown chains have been removed), rated ...

INGERSOLL RAND TH100 DRILL RIG PACKAGE #4218T

• Manufacturer: Ingersoll Rand
• Model: TH-100

) Ingersoll Rand TH100 drill rig, 2000’ depth rating, Range III, Cat C15 (475 hp) engine, 60,000 lb pullback, 2 motor spur gear top head, 16” table opening, KB to ground 14.8’ with sub and 4.1’ no sub, 39’ max ca...

1968 GARDNER DENVER 500 DRILL RIG #10015Ta

• Manufacturer: Gardner Denver

Manufactured 1968, (2) 5 x 6 mud pump, 600 cfm air compressor, 7-1/2” retractable table (rebuilt), 24’ fluted kelly, mounted on 1995 Ford L9000 truck with M11 Cummins engine, 10 speed transmission, PTO, 4 hyd lev...

2016 DIEDRICH D50 DRILL RIG #242T

• Manufacturer: Diedrich

Manufactured 2016, track mounted, John Deere 4 cylinder turbo (115 hp) diesel engine, 24” wide rubber 2-speed track, tandem hydrostatic drive pump, in/out and side to side slide base, cathead, front carrier winch...

1990 DIEDRICH D50 DRILL RIG #3452Tb

• Manufacturer: Diedrich

Manufactured 1990’s, auto hammer, 3 winches, 6 cylinder John Deere diesel engine, mounted on 2013 Hino 268 truck, automatic, approx. 200k miles, used for hollow stem auger and mud rotary wells Price: $62,500

Atlas-Copco ROC D7-11 Drilling Rig

• Manufacturer: Atlas-Copco
• Model: ROC D7-11

Good condition Atlas-Copco ROC D7-11 Drilling Rigs manufactured in 2010. Located in USA and other countries. Click request price for more information.