Machine Tools » Forging

Search By Manufacturer

Search By Country

Building Filters

1231

Used Forging

  • Trusted Seller
    Spares TMP Voronezh Russia

    Spares TMP Voronezh Russia

    • Manufacturer: Voronezh

    6300/8000 tons Press - Spring Item condition: Good condition | Capacity tons: 8000

    Europe
  • Trusted Seller
    Spares TMP Voronezh Russia

    Spares TMP Voronezh Russia

    • Manufacturer: Voronezh

    6300 tons Press - Brake. (Lining Brake Disc) Qty : 2 Nos.

    Europe
  • Trusted Seller
    40 tons Hammer Counterblow DGH40

    40 tons Hammer Counterblow DGH40 Beche

    • Manufacturer: Beche

    Capacity : 40 tons, Rated size : 40,000 kgs, Produces parts which weigh between : 50-400 kg, Counterblow hammer (2 rams with 40T each) pneumo-hydraulic action Ram stroke : 1400 mm, Ram L-R : 3200 mm, Ram F-...

    Europe
  • Trusted Seller
    10 tons Hammer Counterblow Beche

    10 tons Hammer Counterblow Beche DG10H

    • Manufacturer: Beche

    Capacity : 10 tons, Energy of blow : 10000 kg, Stroke : 1000 mm, Distance between columns : 800 mm, Maximum number of blow per minute : 80, Average number of blow per minute : 10, Air consumption per blow :...

    Europe
  • Trusted Seller
    Header Cold Hilgeland CH6V

    Header Cold Hilgeland CH6V

    • Manufacturer: Hilgeland
    • Model: CH6V

    Double Blow Header, Diameter range : 10-20 mm, Shaft length under head : 180 mm, Cutting length : 230 mm, Output - pieces/min : 45/50/56, Press power : 160 ton, Plane of stroke : 240 mm, Weight : 25 tons, ...

    Europe
  • Trusted Seller
    Header Cold Hilgeland CF5AZ

    Header Cold Hilgeland CF5AZ

    • Manufacturer: Hilgeland
    • Model: CF5AZ

    2 Die – 3 Blow Transfer Header, Bushing cut-off Diameter range : 16 mm, Number of dies : 2, Number of stations : 4, Output-pieces/min : 100, Shaft length under head : 130 mm, Cutting length : 160 mm, Weigh...

    Europe
  • Trusted Seller
    Part Former Hot National 7-4

    Part Former Hot National 7-4

    • Manufacturer: National

    Number of forming dies : 4 Production rate : 45- 70 ppm, Forging tonnage : 1500 tons, Max weight of part : 14.3 lbs, Max cutoff diameter : 76 mm, Max cutoff length : 155 mm, Max die kickout : 155 mm, Max p...

    Europe
  • Trusted Seller
    40 tons Hammer Counterblow Beche

    40 tons Hammer Counterblow Beche DGH40

    • Manufacturer: Beche

    Capacity : 40 tons, Impact energy : 40000 mkg, Total hammer stroke : 1250 mm, Max. number of blows : 80 per minutes, Average number of blows : 6 per minutes, Air consumption per blow in m3 of delivered air a...

    Europe
  • Trusted Seller
    Header Progressive Bolt Makers BP-19B6S

    Header Progressive Bolt Makers BP-19B6S

    • Manufacturer: Kingann

    Forging stations : 6, Fingers’ number : 7, Max. Diameter of wire : 23 mm, Production ppm: 90 max, Max. Diam. Screw : m18 x 110 iso 4014; Max open upset : 37 mm Max/min length of cutoff : 15/165 mm, Dies di...

    Europe
  • Trusted Seller
    Billet Shear WMW Erfurt SCPKI315

    Billet Shear WMW Erfurt SCPKI315

    • Manufacturer: Erfurt

    Capacity : 315 tons, Cutting square : 100 mm, Cutting circle : 106 mm, Dia. : 100 mm, Blade length : 380 mm, Stroke per minutes : 380 mm, Left height : 70 mm, Material tensile strength : 45 to 90 Kg/mm2. ...

    Europe
  • Trusted Seller
    Ring Rolling Line Wagner RAW

    Ring Rolling Line Wagner RAW 125/100-2000/500

    • Manufacturer: Wagner

    1. Ring Rolling Machine Wagner RAW 125/100-2000/500 Exterior ring dia. : 300 - 2000 mm, Ring height : 40 - 500 mm, Weight of coil : 800 kg, Radial force : 125 tons, Axial force : 100 tons, Driving power rad...

    Europe
  • Trusted Seller
    Part Former Hot Hatebur AMP70

    Part Former Hot Hatebur AMP70

    • Manufacturer: Hatebur

    Diameter range : 120 mm, Max. width across flats : 105 mm, Max. outside dia. of round pieces : 120 mm, Bar dia. : 36-75 (55) mm, Cutting length : 45 - 135 mm, Number of forming stations : 4, Press power : 2...

    Europe
  • Trusted Seller
    Cross Wedge Roll Smeral ULS35

    Cross Wedge Roll Smeral ULS35

    • Manufacturer: Šmeral Brno

    Rollers diameter : 600 mm, Rollers length : 400 mm, Slug diameter : 14-50 mm, Maximum rolled length : 350 mm, Bottom roller adjustment : +/-25 mm, Weight of the machine : 10.6 tons.

    Europe
  • Trusted Seller
    Billet Shear CADDY 80

    Billet Shear CADDY 80

    • Manufacturer: Peddinghaus
    • Model: CADDY 80

    Strengh 450 N/mm² 80 75, 550 N/mm² 80 75, 650 N/mm² 80 75, 750 N/mm² 75 70, 850 N/mm² 70 65, 950 N/mm² 65 60, Shearing capacity : 4000 kN, Main Motor : 45 kW, Stroking rate : 52 min -1, Dimensions : 425...

    Europe
  • Trusted Seller
    Part Former Hot AMP70

    Part Former Hot AMP70

    • Manufacturer: Hatebur

    Diameter of rod : max. 60 mm, Production rate / min. : max. 70, Outside diameter for round parts : max. 120 mm, Dimensions : 9200 x 6200 x 4650 mm, Total weight : 167.8 tons. Technical manuals not available.

    Europe
2829303132

Overview

Forging equipment is used to shape metal through hammering, pressing, or rolling. This category includes machinery like forge hammers, presses, and rolling mills. These machines are essential in manufacturing industries for producing strong, durable metal parts for automotive, aerospace, and construction sectors.

FAQ

What should I consider when buying used forging equipment?

Consider the machine's age, operational hours, maintenance history, and any signs of wear or damage. Also, check if the equipment meets your specific production requirements.

How is forging equipment typically shipped?

Forging equipment is heavy and requires specialized transport services. Ensure the machinery is properly secured and protected during transit, often requiring disassembly and careful packaging.

What maintenance does forging equipment require?

Regular maintenance includes checking and lubricating moving parts, inspecting for cracks or damages, and ensuring proper alignment and calibration. Follow the manufacturer's manual for detailed maintenance schedules.