Machine Tools » Forging

Search By Manufacturer

Search By Country

Building Filters

1231

Used Forging

  • Trusted Seller
    Cross Wedge Roll ULS55

    Cross Wedge Roll ULS55

    • Manufacturer: Šmeral Brno
    • Model: ULS 55

    Diameter of work piece : max. 55 mm, Diameter of roll segment : max. 600 mm, Width of roll : 500 mm, Roll revolutions : 8 - 16 min^-1, Roll adjustment : 25 mm, Driving power : 55 kW, Dimensions : 3000 x 240...

    Europe
  • Trusted Seller
    Part Former Cold Hatebur BKA4

    Part Former Cold Hatebur BKA4

    • Manufacturer: Hatebur

    Working posts : 4, Press capacity : 350 ToF, Maximum wire dia : 25 mm, Cutoff length : 100 mm, Max. piece diameter : 23 mm, Speed of crankshaft : 65 rpm, Max. length under head : 160 mm, Pieces/Minute max....

    Europe
  • Trusted Seller
    Billet Shear 160

    Billet Shear 160

    • Manufacturer: Ficep

    Press capacity : 800 tons, Max diameter of bar : 45-160 mm, Side for square section : 140 mm, Maximum length of the cut piece : 750 mm, Stroke/min : 15, Stroke of ram : 110 mm, Speed flywheel : 300 rpm, Ma...

    Europe
  • Trusted Seller
    Header Progressive Bolt Maker National

    Header Progressive Bolt Maker National M34S1

    • Manufacturer: National

    Double blow header Diameter range : 4 mm, Shaft length under head : 25 mm, Max. cutting length : 32 mm, Output- piece/min : 350, Weight : 1780 kg, Motor power : 4 kW, Measurements : 200 x 85 x 160 mm.

    Europe
  • Trusted Seller
    Header Progressive Bolt Maker National

    Header Progressive Bolt Maker National M34S1

    • Manufacturer: National

    Double blow header Diameter range : 4 mm, Shaft length under head : 25 mm, Max. cutting length : 32 mm, Output- piece/min : 350, Weight : 1570 kg, Motor power : 4 kW, Measurements : 200 x 80 x 160 mm.

    Europe
  • Trusted Seller
    Header Progressive Bolt Makers BM20

    Header Progressive Bolt Makers BM20

    • Manufacturer: National

    Diameter range: 24 mm, Number of dies: 4, Max. Punch k.o. Stroke 30 mm Min/max. Cutoff of length : 50/200 mm, Die k.o. Stroke : 30/155 mm, Max thread length : 75 mm, Min. Bolt with thread m-16 x 50 din 933,...

    Europe
  • Trusted Seller
    Ring Rolling Line Wagner RAW

    Ring Rolling Line Wagner RAW 125/100-2000/500

    • Manufacturer: Wagner

    1. Ring Rolling Machine Wagner RAW 125/100-2000/500 Exterior ring dia. : 300 - 2000 mm, Ring height : 40 - 500 mm, Weight of coil : 800 kg, Radial force : 125 tons, Axial force : 100 tons, Driving power rad...

    Europe
  • Trusted Seller
    Part Former Hot Hatebur AMP70

    Part Former Hot Hatebur AMP70

    • Manufacturer: Hatebur

    Diameter range : 120 mm, Max. width across flats : 105 mm, Max. outside dia. of round pieces : 120 mm, Bar dia. : 36-75 (55) mm, Cutting length : 45 - 135 mm, Number of forming stations : 4, Press power : 2...

    Europe
  • Trusted Seller
    Cross Wedge Roll Smeral ULS35

    Cross Wedge Roll Smeral ULS35

    • Manufacturer: Šmeral Brno

    Rollers diameter : 600 mm, Rollers length : 400 mm, Slug diameter : 14-50 mm, Maximum rolled length : 350 mm, Bottom roller adjustment : +/-25 mm, Weight of the machine : 10.6 tons.

    Europe
  • Trusted Seller
    Billet Shear CADDY 80

    Billet Shear CADDY 80

    • Manufacturer: Peddinghaus
    • Model: CADDY 80

    Strengh 450 N/mm² 80 75, 550 N/mm² 80 75, 650 N/mm² 80 75, 750 N/mm² 75 70, 850 N/mm² 70 65, 950 N/mm² 65 60, Shearing capacity : 4000 kN, Main Motor : 45 kW, Stroking rate : 52 min -1, Dimensions : 425...

    Europe
  • Trusted Seller
    Part Former Hot AMP70

    Part Former Hot AMP70

    • Manufacturer: Hatebur

    Diameter of rod : max. 60 mm, Production rate / min. : max. 70, Outside diameter for round parts : max. 120 mm, Dimensions : 9200 x 6200 x 4650 mm, Total weight : 167.8 tons. Technical manuals not available.

    Europe
  • Trusted Seller
    Cross Wedge Roll ULS100RA1

    Cross Wedge Roll ULS100RA1

    • Manufacturer: Šmeral Brno
    • Model: ULS 100

    Diameter of processed semi-products : 40-100 mm, Max. semi-product length : 500 mm, Number of working turns per minute : 8.8 Diameter of working rollers : 1000 mm, Width of working rollers : 1000 mm, Grip be...

    Europe
  • Trusted Seller
    Header Progressive Bolt Makers Multimaster

    Header Progressive Bolt Makers Multimaster MM 3-5

    • Manufacturer: Peltzer & Ehlers

    Cold bolt maker : Forming sections : 5, Press Capacity : 235 ToF, Max Wire Diameter : 20 mm, Length : max 170 mm, Screw length : max 145 mm, Ram Stroke : 220 mm, Main Motor : 103 kW/1500 rot/min, Stoke/mi...

    Europe
  • Trusted Seller
    WAFIOS, INGRAMATIC... Steel nail making

    WAFIOS, INGRAMATIC... Steel nail making machines #0373.1

    • Manufacturer: Ingramatic

    Nail stamping machines (9) + ring nail rolling machines (5), complete with reels, conveyor belts, lifters, hoppers, pin aspirators, protective cages, various spare parts, manuals and certifications -- all: wareh...

    Thiene, Italy
  • Trusted Seller
    ASPO NEW product code: 31560

    ASPO NEW product code: 31560

    • Manufacturer: Aspo

    Hurry! This product has already been viewed 861 times! Don't miss out! NEW REEL Visible in Valle d'Aosta Technical data:

    Mogliano Veneto, Italy
2930313233

Overview

Forging equipment is used to shape metal through hammering, pressing, or rolling. This category includes machinery like forge hammers, presses, and rolling mills. These machines are essential in manufacturing industries for producing strong, durable metal parts for automotive, aerospace, and construction sectors.

FAQ

What should I consider when buying used forging equipment?

Consider the machine's age, operational hours, maintenance history, and any signs of wear or damage. Also, check if the equipment meets your specific production requirements.

How is forging equipment typically shipped?

Forging equipment is heavy and requires specialized transport services. Ensure the machinery is properly secured and protected during transit, often requiring disassembly and careful packaging.

What maintenance does forging equipment require?

Regular maintenance includes checking and lubricating moving parts, inspecting for cracks or damages, and ensuring proper alignment and calibration. Follow the manufacturer's manual for detailed maintenance schedules.