Used compression

12" Spin Casting Machine for Lead Fishing Lures takes 9" or 12" Rubber Molds

This is a 12" Spin Casting Machine... this is an old design that uses weights to apply pressure instead of compressed air. As the unit starts to spin, the weights rise and clamp the cover plate. So no compressor ...

Foremost 12" Inch Spin Casting Machine for Fishing Lures Jigs and Lead Sinkers

• Manufacturer: Foremost

This is a 12" Inch Spin Casting Machine for Fishing Lures Jigs and Lead Sinkers... Tested and Running Excellent! - Formost Brand Spin Casting Machine - Baldor Single Phase Motor: - 1/3 Hp - 110 Volts - 6 Amps - ...

Foremost 9 Inch Spin Casting Machine for Fishing Lures Jigs and Lead Sinkers

• Manufacturer: Formost

This is a 9 Inch Spin Casting Machine for Fishing Lures Jigs and Lead Sinkers... Tested and Running Excellent! - Formost Brand Spin Casting Machine - Baldor Single Phase Motor: - 1/3 Hp - 110 Volts - 6 Amps - 17...

Double wiring injection plant OCC

• Manufacturer: OCC

With injection lid lift Ø Wire: max: 13mm 400V/ 35A/ 50Hz/ 3,3kW Dimensions: length: 3260mm; width: 3050mm; height: 5470mm With control With CE Treatment with 2 wires at the same time Additional: 3 thermal analyz...

Screw mixer for core sand 6t/h REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

5,5kW, 400V 50Hz Dimensions: Lenght: 2830mm; With hopper and filling level sensor (3 dosages possible) With 2 screw for additiv With 2 acid pumps With control board PLC SIEMENS S7 Mixer is swivelling by hand Mixe...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

Screw mixer WÖHR 20-40t/h

• Manufacturer: Wöhr

Useful dimensions: Outlet: 2500mm; conveyor belt: 4000mm Control board SIEMENS S7 300, 400V 50Hz 2 pumps for acid/ hardener with flow measurement ENDRESS&HAUSER For furan sand 3 dosages for sand The 2 arms motori...

Roll over with mould station

Roll over Rotation by electric motor Electric motorisated rolling conveyor Mold closing station clamps close pneumatically Rolling conveyor not motorized

Japan Brand Pneumatic Triples Cold Forging Machine

• Manufacturer: Rainbow

1) Equipment advantages The multi-station nut cold heading machine produced by our company is well-made, with high workpiece precision, good stability, and easy operation, especially for the production and proces...

Japan Brand Pneumatic Triples Bolt Making Machine

• Manufacturer: Rainbow

1) Equipment advantages The multi-station nut cold heading machine produced by our company is well-made, with high workpiece precision, good stability, and easy operation, especially for the production and proces...