Used Granulators & Pelletizers

CUMBERLAND 810 GRANULATOR 6096

• Manufacturer: Cumberland

Cumberland model 810 granulator, S/N 39000-68118. 8″ x 10″ feed throat, 2 knife open rotor, 2 bed knife, 5HP 230/460V motor, tray feed hopper, bin discharge. Mounted on casters, complete with starter and controls...

CUMBERLAND 484 GRANULATOR 18173

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 421000-91024. 14″ x 16″ feed throat. 3 knife slant cut open rotor, 2 bed knife. 15 HP 460-volt motor. Insulated tray feed hopper and body panels. 6″ OD airveyor discharge. On ...

CUMBERLAND 810 GRANULATOR 17762

• Manufacturer: Cumberland

Cumberland model 810 granulator, 8″ x 10″ feed throat, 2 knife solid rotor, 2 bed knife, 5 HP 230/460-volt motor, tray feed hopper, bin with 2″ OD rear vacuum take off discharge, 1/4″ holes screen, mounted on cas...

CUMBERLAND 1420 GRANULATOR 16023

• Manufacturer: Cumberland

Cumberland model 1420 granulator. S/N none. 14″ x 20″ feed throat, 3 knife rotor, 2 bed knife. Approximately 20HP motor. No in-feed hopper barrel base discharge with 3/8″ clearance and 26.75″ wide x 24″ deep barr...

CUMBERLAND 1220 GRANULATOR 17979

• Manufacturer: Cumberland

Cumberland model 1220 granulator. S/N 293400-00503. 12″ x 20″ feed throat. 3 knife open rotor, 2 bed knife. 15 HP 230/460-volt motor. Insulated tray feed hopper and body panels. 4″ OD left hand airveyor discharge...

CUMBERLAND 1842i GRANULATOR 16016

• Manufacturer: Cumberland

Used Cumberland model 1842i granulator, S/N CG0170-99504, 18″ x 42″ feed throat, new 3 knife twin shear/high shear open rotor, 2 bed bed knife, 75HP 460V motor, insulated tray feed hopper and body panels, 8″ left...

CUMBERLAND 584 GRANULATOR 16508

• Manufacturer: Cumberland

Cumberland model 584 granulator. S/N 335000-90001. 14″ x 20″ feed throat, 3 knife slant cut open rotor, 2 bed knife, 30HP 230/460V motor. Insulated tray feed hopper with 8″ ID left hand pipe chute gravity dischar...

SEM 23 GRANULATOR 18754

SEM model 23 (Nelmor G1224M1) granulator. S/N 04C05784. 12″ x 24″ feed throat. 5 knife solid rotor with 2 bed knives. 40 HP 460-volt motor. Double wall insulated tray feed hopper with manual jack back assist. 5″ ...

CUMBERLAND 11″ 48 KNIFE PELLETIZER 18986

• Manufacturer: Cumberland

One (1) used 11″ Cumberland “Quietizer” pelletizer with 48 knife solid helical rotor. Powered by a 25 HP A/C motor and Yaskawa model V1000 inverter. Air actuated top pull roll.

CUMBERLAND 8″ 48 KNIFE PELLETIZER 18116

• Manufacturer: Cumberland

One (1) Used 8″ Cumberland “Quietizer” pelletizer. S/N 264550-940006. Rotor is driven by a 15 HP A/C motor with inverter. 3 HP A/C pull roll motor. Has (48) knife solid helical rotor. Air actuated nip rolls. Soun...

CUMBERLAND 8″ 24 KNIFE PELLETIZER 18344

• Manufacturer: Cumberland

One (1) used Cumberland 8″ strand pelletizer. Twenty-four knife solid helical rotor. 10 HP A/C motor with Mitsubishi model A200 inverter. S/N 64050-B-727-6446.

CONAIR 304 20KN PELLETIZER 19045

• Manufacturer: Conair

Conair model 304 pelletizer. S/N 6-040286. 20 knife helical rotor. Single bed knife. 3.5″ wide strand inlet. Driven by a A/C 2 HP 460-volt 1745 RPM motor. Mounted on casters.

Vaner QL300 Granulators & Pelletizer

• Manufacturer: Vaner
• Model: QL300

Good condition Vaner QL300 Granulators & Pelletizers manufactured in 2024. Located in USA and other countries. Click request price for more information.