Used in Hiroshima, Japan

Hata Ironworks TC-E 2
- Manufacturer: Hata Ironworks
One specification with coarse mesh. A detailed specification 1 unit. There is one thing in the middle. ※ Mesh size required Remove powder and burr by rotating action of spiral drum and SUS made mesh cylinder. ※ Q...
Hiroshima, Japan
Seishin company P-60
- Manufacturer: Seishin
Sonic type screen machine, net 75μ Material: SUS | Quantity saved: One
Hiroshima, Japan
Multitubular heat exchanger
2 passes. Since there is no documentation, the heat transfer area cannot be determined without removing the mirror and investigating the diameter x number x length of tubes.
Hiroshima, Japan
Multi-tube heat exchanger, vertical type
Heat transfer area: 4.7 m2 Tube: inner diameter 30mm, length 1240mm Number of tubes: 40 tubes, 400φ, single mirror SUS Heat transfer area: 4.7 m2
Hiroshima, Japan
1998 Hisaka Manufacturing UX-016A-KNJR-8
- Manufacturer: 日阪製作所
Heat transfer area: 0.5m2 Material: Wetted part SUS | Quantity saved: Two
Hiroshima, Japan
2003 LX-025A-TNHJR-6, Hisaka Mfg.
- Manufacturer: 日阪製作所
Heat transfer area: 0.5 m2. Maximum operating temperature: 144°C on A side and B side. Confidential test has been conducted. Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1985 [Hisaka Manufacturing] Spiral condenser No model
- Manufacturer: Hisaka
Vortex type, design temperature: 50°C Heat transfer area 8㎡ Plate material: SUS317L
Hiroshima, Japan
［Tokai Carbon] Carbon capacitor No model
- Manufacturer: 東海カーボン
Heat transfer area: 5.9m2 Quantity saved: 1
Hiroshima, Japan
［Carbon multi-tube heat exchanger (vertical type)
Heat transfer area: 4.9 m2 Tube: inner diameter 25 mm, length 2000 mm Number of tubes: 31 1-pass specification Heat transfer area: 4.9 m2
Hiroshima, Japan
1991 Carbon capacitor
Heat resistance temperature: 360°C Withstand pressure: 0.5MPa(75PSIG) Heat Transfer Area: Unknown (Approx. 10㎡ based on size)
Hiroshima, Japan
［Carbon capacitor No model
Heat transfer area: Unknown as there is no nameplate (estimated from size to be around 5-10 m2).
Hiroshima, Japan
1990 s.e.c. sh-5622-14
- Manufacturer: エスイーシー
Heat transfer area: 7.74 m2 Material: KCB (copper-nickel alloy) on the tube side Copper side SS41
Hiroshima, Japan
2008 Tokai Carbon EC25CS2-18
- Manufacturer: 東海カーボン
Heat transfer area: 20.2 m2 on both sides A and B Design temperature: 150°C on A side, 50°C on B side Carbon part defective. The defective part has been identified. New parts can be replaced.
Hiroshima, Japan
SSC RC456SK-42-9
- Manufacturer: エスイーシー
Cubic type Heat transfer area: 1.12 m2 Material: carbon | Quantity saved: One
Hiroshima, Japan
1999 Le Carbon Cubic
- Manufacturer: ル・カーボン
Cubic type heat transfer area 18.5 m2 Carbon part defective
Hiroshima, Japan