Used in Hiroshima, Japan

Ikebukuro Horo Kogyo 2000L
- Manufacturer: Ikebukuro Enamel Industry
Capacity: 2000L Design Pressure: Main Unit F.V. ~0.294 MPaG, Jacket 0.39 MPaG Outline drawing available
Hiroshima, Japan
Multitubular heat exchanger
Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One
Hiroshima, Japan
1998 Mitsuwa Pump Manufacturing Co. 2.5SMC-MB
- Manufacturer: Mitsuwa Pump Works
Pump part only (motor missing) Bore: 65 Lifting capacity: 0.34 m3/m Head: 30 m
Hiroshima, Japan
2000 Mitsuwa Pump Manufacturing Co. 2.5SMC
- Manufacturer: Mitsuwa Pump Works
Bore: 65 Lifting capacity: 0.17 m3/m Head: 30 m Power: 7.5kw | Quantity saved: One
Hiroshima, Japan
1984 Crosse KSH-Ⅲ
- Manufacturer: cross-examination
Heat transfer area: 25 m2 Drawings available Quantity saved: One
Hiroshima, Japan
1999 Tomoe Kogyo PTM300
- Manufacturer: Tomoe kogyo
4000 rpm/3250 rpm, approximately 3000G Four units with a 1/165 gear ratio, one unit with a 1/125 gear ratio Backdrive specification (can be modified to single-motor) 1999, 2000, 2004 (two units), and 2007 models ...
Hiroshima, Japan
1999 Tanabe Wiltec O-24
- Manufacturer: Tanabe Wiltech
Top discharge type 24" Explosion-proof Rotation speed: 1,950 rpm Capacity: 40L
Hiroshima, Japan
2000 Tanabe Wiltech DAC-30
- Manufacturer: Tanabe Wiltech
30-inch, fully automatic, explosion-proof Rotation speed: 1,310 rpm Capacity: 45L
Hiroshima, Japan
Hammer mill (swing)
400V specification explosion proof type Purchasing area: 60Hz | Material: SS | Quantity saved: 1
Hiroshima, Japan
Nara Machinery M-8
- Manufacturer: Nara machinery
- Horsepower: 101 hp
Motor: 75 kw (exchangeable to 37 to 55 kW) Rotary disk diameter: 950 Number of revolutions: 1800 rpm Material: made in SS The motor can be exchanged for 37 kW.
Hiroshima, Japan
Makino F-101
- Manufacturer: Makino
Specifications:Fully automatic type converted to semi-automatic Filtration area: 14.5m2 Filtration volume: 200L Filtration plate dimensions: 650 x 650 x 18 chambers Filtration plate material: PP
Hiroshima, Japan
1998 [Daiko Kakoki] Conical Dryer 1000L
- Manufacturer: Daiko Kako Kako Kikai
Can body 1200φ×1837 Design pressure: FV vacuum inside can ~3Kg / Jacket 3kg
Hiroshima, Japan
Dalton DV-1-100
- Manufacturer: Dalton
Total capacity: 220L with butterfly valve Power: 0.75KW | Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: 1 unit
Hiroshima, Japan
Ribbon Blender
Main motor 11Kw, discharge motor 0.75Kw (reduction ratio 1/29) Capacity approx. 1500L
Hiroshima, Japan
[TANABE WILTECH] Basket type centrifuge 55inch
- Manufacturer: Tanabe Wiltech
Manual scraping device. Bottom discharge type. Main motor pole change specification, 13Kw-26Kw 200V, explosion proof
Hiroshima, Japan