Used Evaporators

Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220581

• Manufacturer: Kleiser Gmbh

both sides , 4.685 l internal, 1.100 l jacket total height 8.550 mm

Stainless Steel 316 Wiped/Thin Film Evaporator - IPP# 205459

• Manufacturer: Pope Scientific

Wiped-Film Molecular (Short-Path) Still 2 to 50 liters/hour. Electrically heated with slotted glass filled Teflon wipers on rotor. Mechanical seal on shaft. With high vacuum pump.

Stainless Steel 316 Hitachi Wiped/Thin Film Evaporator - IPP# 74896

• Manufacturer: Hitachi

jkt rated 125 psi @ 350 deg F 2-zone CS jkt. 10' long evaporation section. 8-blade rotor, mech seal on shaft. Belt driven by 30 HP, 3/60/460 volt, 890 rpm TEFC motor.

Evaporator Rising/Falling Film Two Effect Stainless Steel 304 - IPP# 216076

double effect evaporation system. See video of system operating at Capacity based on a brine stream at 24% to 50% strength. Feedstock of 32,000 lbs/hr(normal operating) or up to 50,000 lbs./hr. brine at ~ 20-25% ...

Hastelloy - C22 Clad Wiped/Thin Film Evaporator - IPP# 220954

• Manufacturer: SMS Buss

with 316 SS rotor, Jacket rated for 218 psi at 482 degrees F. Heating surface area 150.7 Sq. Ft., Serial numbers: Lower Body Serial Number 1400/56, National Board Number 717; Interm body Serial Number 1400/56, Na...

Zymark TurboVap LV Evaporator

• Manufacturer: Zymark

The Zymark TurboVap LV Concentration Evaporator, P/N 43750, is a workstation that provides simultaneous evaporation of up to (50) 15mL centrifuge tubes, offering many interchangeable tube racks which gives you th...

Stainless Steel 316 Artisan Wiped/Thin Film Evaporator - IPP# 91223

• Manufacturer: Artisan

hot oil jacket rated 30 psi/full vacuum @ 450 deg F. Driven by 7.5 HP, 3/60/230/460 volt, 1750 rpm motor. With 3 HP, 3/60/230/460 volt, 1750 rpm rotary gear pump.

Stainless Steel 316 Luwa SMS Wiped/Thin Film Evaporator - IPP# 88542

• Manufacturer: Luwa

Rated vac int. Upper jkt rated 257 psi (17.5 Kg/cm2) @ 208 deg C, lower jkt rated 205 psi (14 Kg/cm2) @ 298 deg C. 10" btm cone, 8" dia x 24" long entrainment section No motor, unit is setup for belt drive No stand.

Stainless Steel 316L Pfaudler Wiped/Thin Film Evaporator - IPP# 233717

• Manufacturer: Pfaudler

wiped film evaporator system. Jacket rated for 160 psi at 650 degrees F. Drive system by Pfaudler, 3 DTW With 158 Sq.Ft. external condenser, 316 SS tubes 316 SS tube sheet 316 SS heads CS shell NB # 43399 Shell s...

Stainless Steel 316 Rodney Hunt Wiped/Thin Film Evaporator - IPP# 116939

• Manufacturer: Rodney Hunt

Turbo-film evaporator CS jacket jacket rated 150 psi @ 400 degree F. with 16" cone bottom. Unit driven by 15 HP, 3/6/440 volt, 1760 rpm motor. Rotor speed 690 rpm. Includes:134 Sq Ft, 10" diameter x 8' long 304 S...

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O

• Manufacturer: Organomation

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O is a reliable solution for efficient nitrogen evaporation in the lab. This model is ideal for laboratories nee...

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215309

• Manufacturer: Luwa

wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts, 323.9mm ID x 8450mm long x 7mm thick shell carbon steel jacket 368mm diameter x 8410mm lon...

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215308

• Manufacturer: Luwa

wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts, 323.9mm ID x 8450mm long x 7mm thick shell carbon steel jacket 368mm diameter x 8410mm lon...

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215304

• Manufacturer: Luwa

jacketed horizontal wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts 323.9mm ID x 8450mm long x 7mm thick carbon steel jacket 368mm diameter...

Stainless Steel 321 Buhler OTW-500 Crystallizer/Evaporator Plastic - IPP# 219971

• Manufacturer: Bühler

Vibrating fluid bed with enclosed chamber rated pe=60 mbar total pressure drop, ca.30 mbar differential pressure ca 2 mbar design pressure pe=90 mbar @ 200 deg C, 400 deg C product thickness ca.200mm Openings inc...