Used Machine Tools in Saxony, Germany

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !

1985 WMW 500

• Manufacturer: WMW
• Model: 500

face slide with 4 clamping chucks (clamping travel 60mm) clamping area internal: 145-500mm and external 140-420mm flange intake size= dia. 200mm with clamping bolts equipment: socket wrench

Röhm SSH 200/3 (Nr. 43)

• Manufacturer: Röhm

stationärer Spannstock SSH 200 Kraftspannfutter, hydraulisch Kraftspannung 53 kN Merkmale: Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm Grundflansch Ø 290x30mm Flanschaufnahme Ø 140x10mm 20 Satz div. For...

Röhm Duro-NCES 260 77/3 (37)

• Manufacturer: Röhm

Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm

SMW Autoblock 105510 (Nr.40)

• Manufacturer: SMW Autoblock

Power chuck, automatic clamping Features: Equipped with forming jaws Clamping range min./max. 60 / 320mm Flange mounting Ø 295x5mm inside; mounting 3x holes Ø 21mm and pitch circle Ø 230mm

Forkardt KS 400 (Nr. 45)

• Manufacturer: Forkardt

Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø ...

WMW PS 300

• Manufacturer: WMW

technical features: - 4 jaw chuck, manual feed, clamping range: outside= max. Ø 280mm as well as inside=min. Ø 40mm

GESAU drill

• Manufacturer: Pagus

Stepped drill with internal cooling GETTING (Ø14,5x23,5 /120 ° x25x110) with internal cooling! unused!

BO322

Column drill press ZMM METALLIK PAZARDJIK MK20 Vise: Motor: ELPROM A0100L8/4 0.7 / 1.1 kW 720 / 1430 rpm 380 V 3AC 2.5 / 3.2 A Used, tested!

MMZ15

• Manufacturer: Pagus

Machine vice WMW SX200 used, tested !

PAGUS drill

• Manufacturer: Pagus

Twist drill RECA HSS Twist drills 29.75 - 50 mm MK Shank 29.75 /32/35/37/38/39 /39.75 /42/44/44/46/50mm 14 pieces Used!

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 10 pieces TARGET PRECISION Series 150 Other quantities on request! New! Â

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 16 pieces TARGET PRECISION Series 150 Other quantities on request! New!

GARANT shrink chuck kit

• Manufacturer: Garant

Shrink fit kit, shrink chuck WARRANT 302,325 SK 40 Used!

WMW milling head

• Manufacturer: WMW

Milling head , Drilling head , Angle head WMW, WEMA Engelsdorf UA1 Rotatable 360° in two levels Hollow shaft (drive): Ø 28 mm, wedge width: 6 mm used, checked!